Qaba Kids Ride-on Walking Horse Instruction Manual

1. Introduction

Thank you for choosing the Qaba Kids Ride-on Walking Horse. This manual provides essential information for the safe assembly, operation, and maintenance of your new ride-on toy. Please read it thoroughly before use and retain it for future reference.

This interactive ride-on toy is designed to encourage balance, coordination, and imaginative play for children aged 5 to 16 years.

2. Safety Information

WARNING: CHOKING HAZARD - Small parts. Not for children under 3 years.

• Always supervise children during use.
• Ensure the child's feet can comfortably reach the pedals and the handlebars.
• Maximum weight capacity: 130 lbs (59 kg).
• Recommended age: 5-16 years.
• Use on flat, even surfaces. Avoid slopes, stairs, or uneven terrain.
• Keep away from open flames, heat sources, and water.
• Regularly inspect the toy for loose parts, damage, or wear before each use. Do not use if damaged.
• This product complies with ASTM F963, CPSIA, and SOR safety standards.

3. Assembly and Setup

The Qaba Ride-on Walking Horse typically comes pre-assembled or requires minimal setup. Follow these general guidelines:

1. Carefully remove all packaging materials.
2. Inspect the horse for any visible damage or missing components.
3. Ensure the handlebars are securely attached and tightened.
4. Before riding, ensure the four retaining rings on the wheels are in the 'down' position. These rings are designed to prevent backward rolling and assist with forward motion.
5. Verify that the footrests are properly positioned and secure. The footrests are adjustable to accommodate different leg lengths.

Image: The Qaba Kids Ride-on Walking Horse, showcasing its plush body, saddle, handlebars, and wheels.

4. Operating Instructions

Operating the Qaba Ride-on Walking Horse is an engaging experience that promotes physical activity and imaginative play.

How to Ride:

1. Mounting: Help the child safely mount the horse, ensuring they are seated comfortably in the saddle.
2. Foot Placement: Instruct the child to place their feet on the footrests.
3. Forward Motion: To move forward, the child should press down on the pedals with their feet, then release. This action mimics a walking motion, propelling the horse forward.
4. Steering: The horse is steered by holding and gently turning the handlebars located on the head of the horse. This allows for gradual changes in direction.

Image: Visual guide demonstrating the three steps for operating the ride-on horse: Step down pedals, Release feet, Moves forward. Also shows the wheel retaining rings.

Image: Illustration of how to control the direction by holding and turning the steering handle on the horse's head.

5. Maintenance

Regular maintenance ensures the longevity and safe operation of your Qaba Ride-on Walking Horse.

• Cleaning: Wipe the plush body with a damp cloth and mild soap. Do not immerse in water. Allow to air dry completely.
• Wheel Inspection: Periodically check the wheels for debris, hair, or other obstructions. Clean as necessary.
• Lubrication: If the wheels do not roll smoothly or the horse requires excessive effort to move, consider lubricating the wheel bearings. This can significantly improve the riding experience.
• Fasteners: Ensure all screws, bolts, and other fasteners are tight. Re-tighten if any looseness is detected.
• Storage: Store the toy in a cool, dry place away from direct sunlight and extreme temperatures.

Image: Detailed views highlighting the simulated appearance, comfortable saddle, sturdy pedals, and rolling wheels of the Qaba Ride-on Walking Horse.

6. Troubleshooting

If you encounter issues with your Qaba Ride-on Walking Horse, refer to the following common solutions:

• Horse does not move forward easily:
  - Ensure the four retaining rings on each wheel are in the 'down' position. These are designed to assist forward motion and prevent backward rolling during operation.
  - Check for any obstructions around the wheels.
  - The wheels may require lubrication. Apply a suitable lubricant to the wheel bearings for smoother operation.
• Wheels do not roll backward:
  - The design incorporates wheel locks on the back wheels to facilitate forward motion. To allow backward rolling, these wheel locks can be manually lifted.
• Rough or uneven ride:
  - Inspect all wheels for proper installation and ensure no spacers are missing. A missing spacer can cause a wheel to tilt and not roll smoothly.
  - Lubricate the wheel bearings as described in the Maintenance section.
• Difficulty steering:
  - The steering mechanism may loosen over time with use, making turns easier. If steering feels stiff, ensure no parts are obstructed.

7. Specifications

Image: Visual representation of the horse's dimensions, including length, width, and height, with seat height indicated.

8. Warranty and Support

For warranty information or customer support, please contact the manufacturer, Aosom LLC, or the retailer from whom the product was purchased. Keep your proof of purchase for any warranty claims.

For further assistance, please refer to the contact information provided with your product packaging or visit the official Qaba website.