Hoco HC1 Trendy Sound Sports Wireless Speaker User Manual

Introduction

Thank you for choosing the Hoco HC1 Trendy Sound Sports Wireless Speaker. This manual provides essential information for setting up, operating, and maintaining your speaker to ensure optimal performance and longevity. Please read this manual thoroughly before using the product.

Image: The Hoco HC1 speaker, showcasing its cylindrical design, dark green color, and integrated braided strap for portability.

Package Contents

• Hoco HC1 Wireless Speaker
• Charging Cable (USB)
• User Manual

Setup

1. Charging the Speaker

Before first use, fully charge the speaker. Connect the provided USB charging cable to the speaker's charging port and the other end to a compatible USB power adapter (not included) or a computer's USB port.

• Charging time: Approximately 2 hours.
• The indicator light will typically show charging status (e.g., red while charging, off or blue when fully charged).

2. Powering On/Off

• To power on: Press and hold the Power button for a few seconds until you hear an audible prompt or see the indicator light illuminate.
• To power off: Press and hold the Power button again for a few seconds until the speaker powers down.

3. Bluetooth Pairing

After powering on, the speaker will automatically enter Bluetooth pairing mode, indicated by a flashing light or audible prompt.

1. Enable Bluetooth on your device (smartphone, tablet, computer).
2. Search for available Bluetooth devices.
3. Select "HC1" from the list of devices.
4. Once paired, the speaker will confirm with an audible sound, and the indicator light will typically become solid.

Image: A side view of the Hoco HC1 speaker, highlighting the Hoco brand logo and the woven fabric texture of its exterior.

Operating Instructions

Bluetooth Mode

After successful pairing, you can play audio from your connected device. Use your device's controls for playback (play/pause, skip tracks) and the speaker's volume controls.

TWS (True Wireless Stereo) Function

The HC1 speaker supports TWS, allowing you to pair two HC1 speakers together for a stereo sound experience.

1. Ensure both HC1 speakers are powered on and not connected to any Bluetooth device.
2. On one speaker, press and hold the TWS button (if available, or a specific button as per speaker design) until you hear a prompt indicating TWS pairing mode.
3. The two speakers will automatically connect to each other. Once connected, one speaker will act as the master (left channel) and the other as the slave (right channel).
4. Connect your device to the master speaker via Bluetooth as described in the "Bluetooth Pairing" section.

TF Card Playback

Insert a TF (microSD) card with audio files (MP3, WAV, etc.) into the TF card slot. The speaker will automatically switch to TF card mode and begin playback.

USB Playback

Insert a USB flash drive with audio files into the USB port. The speaker will automatically switch to USB mode and begin playback.

AUX Mode

Connect an audio device to the speaker's AUX-in port using a 3.5mm audio cable (not included). The speaker will automatically switch to AUX mode.

FM Radio

To activate FM radio mode, press the Mode button (if available) until you hear the FM radio prompt. Use the volume buttons to scan for stations or adjust frequency.

Volume Control

Use the volume buttons on the speaker to adjust the playback volume. Long press for continuous adjustment, short press for incremental changes.

Image: The Hoco HC1 speaker displayed with its durable braided strap fully extended, emphasizing its portable design.

Maintenance

• Cleaning: Use a soft, dry cloth to clean the speaker's surface. Do not use abrasive cleaners, alcohol, or chemical solvents.
• Storage: Store the speaker in a cool, dry place away from direct sunlight and extreme temperatures.
• Battery Care: To prolong battery life, avoid fully discharging the speaker frequently. Charge it regularly, even if not in use for extended periods.
• Water Resistance: While designed for sports, avoid submerging the speaker in water. Refer to product specifications for any IP rating.

Troubleshooting

Specifications

Image: The Hoco HC1 speaker displayed with its physical dimensions, showing a height of 14.2 cm and a width/depth of 8.5 cm.

Warranty Information

Hoco products are manufactured to the highest quality standards. This product is covered by a standard manufacturer's warranty against defects in materials and workmanship from the date of purchase. Please retain your proof of purchase for warranty claims. The warranty does not cover damage caused by misuse, accident, unauthorized modification, or normal wear and tear.

For specific warranty terms and conditions, please refer to the warranty card included with your product or contact Hoco customer support.