1. Introduction
This manual provides detailed instructions for the safe installation, operation, and maintenance of your Emliviar Outdoor Porch Light, Model XE219B BK. Please read this manual thoroughly before installation and retain it for future reference.
Image 1.1: The Emliviar XE219B BK outdoor wall light, featuring a black finish, clear glass panels, and a decorative curved arm.
2. Safety Information
WARNING: Risk of electric shock. Disconnect power at the circuit breaker or fuse box before installation or servicing.
- All electrical connections must be in accordance with local codes and ordinances, National Electric Code (NEC), and ANSI/NFPA 70-1999.
- Consult a qualified electrician if you are unsure about the installation process.
- Wear safety glasses and appropriate protective equipment during installation.
- Handle glass components with care to prevent breakage.
- Ensure the fixture is securely mounted to a structural element.
3. Package Contents
Verify that all components are present before beginning installation:
- Outdoor Wall Light Fixture (1)
- Mounting Hardware (1 set)
- Instruction Manual (1)
Note: Bulb is NOT included. Requires 1 x E26 base bulb (Max. 60W).
4. Specifications
| Feature | Specification |
|---|---|
| Model Number | XE219B BK |
| Dimensions (L x W x H) | 5.9" x 7.9" x 12.2" |
| Back Plate Dimensions (W x H) | 4.1" x 6.1" |
| Material | Aluminum, Clear Glass |
| Finish | Black |
| Bulb Base | E26 |
| Max Wattage | 60W |
| Voltage | 120V |
| Indoor/Outdoor Use | Outdoor (Wet Location Rated) |
| Certifications | ETL Listed |
Image 4.1: Technical drawing of the Emliviar XE219B BK outdoor wall light providing precise measurements.
5. Setup and Installation
Follow these steps for proper installation of your outdoor porch light:
- Turn Off Power: Before starting, ensure the power supply to the junction box is turned off at the circuit breaker or fuse box.
- Prepare Mounting Plate: Attach the mounting plate (part of the included hardware) to the junction box using the provided screws. Ensure it is securely fastened.
- Make Electrical Connections:
- Connect the black wire from the fixture to the black (hot) wire from the junction box.
- Connect the white wire from the fixture to the white (neutral) wire from the junction box.
- Connect the ground wire from the fixture to the ground wire from the junction box (or to the green ground screw on the mounting plate).
- Secure all connections with wire nuts and wrap with electrical tape for added safety.
- Mount the Fixture: Carefully align the fixture with the mounting plate and secure it using the provided screws. Ensure the fixture is flush against the wall and stable.
- Install Bulb: Insert one E26 base bulb (Max. 60W, not included) into the socket. The open bottom design allows for easy bulb replacement.
- Restore Power: Once installation is complete and all connections are secure, restore power at the circuit breaker.
Image 5.1: The Emliviar XE219B BK outdoor wall light installed on an exterior wall, demonstrating its appearance in a typical setting.
Image 5.2: Two Emliviar XE219B BK outdoor wall lights symmetrically installed on either side of a front door.
6. Operating Instructions
The Emliviar Outdoor Porch Light is designed for simple operation once installed:
- Power On/Off: Control the light using your existing wall switch connected to the fixture's circuit.
- Bulb Compatibility: This fixture is compatible with Incandescent, LED, or CFL bulbs with an E26 base, up to 60 watts. Choose a bulb that suits your desired brightness and color temperature.
7. Maintenance
Regular maintenance ensures the longevity and optimal performance of your light fixture:
- Cleaning: Clean the fixture with a soft, damp cloth. Avoid abrasive cleaners or solvents that could damage the finish or glass.
- Bulb Replacement: To replace the bulb, ensure power is off at the circuit breaker. Unscrew the old bulb and screw in a new E26 base bulb (Max. 60W). The open bottom design facilitates easy access.
- Inspection: Periodically inspect the fixture for any signs of wear, loose connections, or damage. Address any issues promptly.
Image 7.1: The Emliviar XE219B BK outdoor wall light is designed to be waterproof, heat resistant, stormproof, and frost resistant.
8. Troubleshooting
If you encounter issues with your Emliviar Outdoor Porch Light, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on | No power to the fixture Loose wire connections Faulty bulb | Check circuit breaker/fuse. Ensure power is on. Verify all wire connections are secure (with power off). Replace bulb with a new, working E26 bulb. |
| Light flickers | Loose bulb Incompatible dimmer switch Loose wiring | Tighten bulb securely. Ensure dimmer switch is compatible with the bulb type (if applicable). Check wire connections (with power off). |
| Glass panels are foggy or dirty | Accumulation of dust or debris | Clean glass panels with a soft, damp cloth. |
If the problem persists after attempting these solutions, please contact customer support.
9. Warranty and Support
This Emliviar Outdoor Porch Light, Model XE219B BK, comes with a one-year warranty from the date of purchase, covering defects in materials and workmanship.
For warranty claims, technical assistance, or any questions regarding your product, please contact Emliviar customer support through the retailer where the product was purchased or visit the official Emliviar website for contact information.
Please have your model number (XE219B BK) and proof of purchase ready when contacting support.
