Ascher 6-Light LED Track Lighting Kit (Model Y9164-6) Instruction Manual

1. Product Overview

The Ascher 6-Light LED Track Lighting Kit provides versatile illumination with its modern design and adjustable light heads. This kit includes six GU10 LED bulbs, offering bright daylight white light suitable for various indoor spaces.

Image: The Ascher 6-Light LED Track Lighting Kit, featuring a black finish and six adjustable light heads with GU10 bulbs.

Key Features:

• Modern Design: High-quality metal with matte black finish, resistant to fading and corrosion.
• Multi-angle Illumination: Six light heads and two lamp arms are adjustable. Heads rotate 360° horizontally and 90° vertically.
• Included LED Bulbs: Six 4W GU10 LED bulbs (non-dimmable), 400 LM output, 5000K daylight white light, CRI ≥ 80.
• Easy Installation: Includes all necessary mounting hardware for quick setup on various ceiling types.

2. Package Contents

Before beginning installation, please verify that all components are present and undamaged.

• 1 x Ascher 6-Light LED Track Lighting Fixture (Model Y9164-6)
• 6 x GU10 LED Bulbs (4W, 5000K Daylight White, Non-Dimmable)
• 1 x Mounting Hardware Kit (screws, wire nuts, mounting plate)
• 1 x Hex Tool (for arm adjustment)
• 1 x User Manual (this document)

3. Safety Information

Please read and understand all instructions before installation and use. Failure to follow these instructions may result in electric shock, fire, or other hazards.

• Always turn off power at the circuit breaker before installing or servicing the fixture.
• Consult a qualified electrician if you are unsure about the installation process.
• This fixture is designed for indoor use only.
• Do not use with dimmer switches, as the included bulbs are non-dimmable.
• Ensure the fixture is securely mounted to a structurally sound ceiling.

4. Installation Instructions

1. Prepare for Installation:

   Turn off the power to the junction box at the circuit breaker. Ensure the power is completely off before proceeding.

2. Mount the Canopy:

   Attach the mounting plate to the ceiling junction box using the provided screws. Ensure it is firmly secured. The fixture can be installed on sloped or vaulted ceilings.

   

   Image: Diagram showing the dimensions of the track lighting kit (46.5 inches L x 5.9 inches H) and the base (4.7 inches diameter), along with GU10 bulb specifications.

3. Wire the Fixture:

   Connect the fixture's wires to the corresponding wires from the junction box (black to black, white to white, ground to ground) using the provided wire nuts. Carefully tuck all wires into the junction box.

4. Secure the Fixture:

   Attach the fixture's canopy to the mounting plate, securing it with the decorative nuts or screws provided.

5. Install the Bulbs:

   Insert the GU10 LED bulbs into each of the six light heads. Ensure they are twisted securely into place.

   

   Image: A hand demonstrating how to insert a GU10 LED bulb into the standard GU10 socket of the track light head.

6. Restore Power:

   Turn the power back on at the circuit breaker and test the light fixture.

5. Operating Instructions

Adjusting Light Heads and Arms:

The Ascher 6-Light LED Track Lighting Kit offers flexible illumination through its adjustable components.

• Light Head Rotation: Each of the six light heads can be rotated 360° horizontally to direct light across a wide area.
• Light Head Tilt: Each light head can be tilted 90° vertically to focus light precisely where needed.
• Arm Adjustment: The two lamp arms can also be adjusted to change the overall configuration of the track. Use the included hex tool to loosen, adjust, and then tighten the arms to secure their position.

Image: Close-up view illustrating the 360° rotatable and 90° adjustable features of the light heads.

Image: A hand using the hex tool to adjust the lamp arms, allowing for flexible positioning of the track segments.

Power Control:

The fixture is operated via a standard wall switch (push button type). The included GU10 LED bulbs are not dimmable. Do not connect this fixture to a dimmer switch.

6. Maintenance

Cleaning:

To clean the fixture, ensure the power is off. Wipe the surface with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the finish.

Bulb Replacement:

The fixture uses GU10 LED bulbs. To replace a bulb:

1. Turn off power to the fixture at the circuit breaker.
2. Allow the bulb to cool completely if it has been recently in use.
3. Gently twist the old GU10 bulb counter-clockwise to remove it from the socket.
4. Insert the new GU10 LED bulb by aligning its pins with the socket holes and twisting clockwise until secure.
5. Restore power and test the new bulb.

7. Troubleshooting

8. Specifications

9. Warranty and Support

For warranty information or technical support, please contact Ascher customer service. Refer to your purchase documentation for specific warranty terms and contact details.

Manufacturer: Ascher

Date First Available: January 27, 2021