Introduction
Welcome to the user manual for your Redragon GS510 RGB Desktop Speakers. These 2.0 channel PC computer speakers are designed to provide enhanced audio for your desktop, laptop, or TV, featuring vibrant RGB backlighting and convenient controls.
Product Features
- Enhanced Clear Bass: Equipped with advanced sound drive unit with full range 2.0 channel enhanced stereo core, GS510 offers you superior clear and rich sound.
- Touch Controlled RGB Lighting: Not only the sound quality is solid, but also the lighting bar is attractive. 4 modes are selectable for different ambiances by touch-control, switch off the light is also available.
- More Than Fancy: Minimalism modern urban design with solid frame keeps it in a calm and low key style. Up to 39 inches cable length between the two sound units compatible for most desk devices.
- Handy Volume Knob: Delicate and compact volume knob combined with on/off switch offers you a convenient and precise volume adjustment.
- Plug & Play for Broad Compatibility: USB powered with 3.5mm audio and mic cables allows this rockstar to party on wide types of stages for PC, TV, and Laptop. Up to 33 in (85 cm) cable length between two speakers.
Package Contents
- 2 x Redragon GS510 Speakers
- 1 x USB Power Cable
- 1 x 3.5mm Audio Cable
- 1 x 3.5mm Microphone Cable
Setup
Follow these steps to set up your Redragon GS510 speakers:
- Place the speakers on either side of your monitor or laptop, ensuring the 39-inch cable length between them is sufficient for optimal stereo separation.
- Connect the USB power cable from the main speaker to an available USB port on your computer, laptop, or a USB power adapter.
- Connect the 3.5mm audio cable from the main speaker to the audio output (headphone jack) of your device (PC, laptop, TV).
- Connect the 3.5mm microphone cable (if using) from the main speaker to the microphone input of your device.
- Turn the volume knob on the front of the main speaker clockwise to power on the speakers and adjust the volume.
Visual Guide: Speaker Placement
Image: Redragon GS510 speakers positioned on a desk alongside a laptop, demonstrating typical placement for optimal audio experience.
Visual Guide: Connectivity
Image: A detailed view of the Redragon GS510 speaker's rear, highlighting the USB power input and 3.5mm audio and microphone jacks for connection to various devices.
Operating Instructions
Power On/Off and Volume Control
The main speaker features a multi-function knob on its front panel.
- To power on the speakers, rotate the knob clockwise. You will hear a click, and the RGB lighting will illuminate.
- To increase volume, continue rotating the knob clockwise.
- To decrease volume, rotate the knob counter-clockwise.
- To power off the speakers, rotate the knob counter-clockwise until you hear a click and the RGB lighting turns off.
RGB Lighting Control
The Redragon GS510 speakers feature touch-controlled RGB lighting with 4 selectable modes.
- To cycle through the lighting modes, gently tap the touch-sensitive area on the top of the main speaker.
- The available modes include various color cycles and static colors.
- To turn off the lighting, continue tapping until the lights are off. Tap again to reactivate the lighting.
Visual Guide: RGB Lighting
Image: A close-up view of the Redragon GS510 speaker highlighting the touch-sensitive area for controlling the dynamic RGB lighting effects.
Maintenance
- Keep the speakers clean by wiping them with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
- Ensure proper ventilation around the speakers to prevent overheating.
- Avoid exposing the speakers to extreme temperatures, humidity, or direct sunlight.
- Do not attempt to disassemble or repair the speakers yourself. Contact qualified service personnel for assistance.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No sound | Speakers not powered on | Ensure the volume knob is turned clockwise to power on. |
| No sound | Audio cable not connected properly | Verify the 3.5mm audio cable is securely connected to both the speaker and the audio output of your device. |
| No sound | Device volume too low or muted | Increase the volume on your computer/laptop/TV and check if it's muted. |
| No sound | Incorrect audio output selected on device | In your device's sound settings, ensure the correct audio output (e.g., "Speakers (Redragon GS510)") is selected. |
| RGB lights not working | Speakers not powered on | Ensure the volume knob is turned clockwise to power on. |
| RGB lights not working | Lighting mode turned off | Tap the touch-sensitive area on the top of the main speaker to cycle through modes or turn lights back on. |
| Distorted sound | Volume too high | Decrease the volume on both the speakers and your connected device. |
| Distorted sound | Poor audio source quality | Test with a different audio source or file to determine if the issue persists. |
Specifications
| Feature | Detail |
|---|---|
| Brand | Redragon |
| Model Name | Waltz (GS510) |
| Speaker Type | Surround Sound (2.0 Channel) |
| Connectivity Technology | USB |
| Power Source | Corded Electric (USB Powered) |
| Input Voltage | 5 Volts |
| Speaker Maximum Output Power | 3 Watts |
| Frequency Response | 20 KHz |
| Control Method | Touch (for RGB), Mechanical knob (for Volume) |
| Material | Acrylonitrile Butadiene Styrene (ABS) |
| Product Dimensions | 7.28 x 6.69 x 4.33 inches |
| Item Weight | 1.45 pounds |
| Color | Black |
| Included Components | 2 speakers, USB cable, 3.5mm audio and mic cables |
Warranty and Support
The Redragon GS510 RGB Desktop Speakers come with a limited warranty. For detailed warranty information, please refer to the warranty card included in your product packaging or visit the official Redragon website.
For technical support, troubleshooting assistance, or any inquiries regarding your product, please contact Redragon customer service through their official channels.
You can find more information and support resources at the Redragon Store on Amazon.
