Mesqool CR1001em Alarm Clock with Bed Shaker User Manual

Introduction

Thank you for choosing the Mesqool CR1001em Alarm Clock with Bed Shaker. This device is designed to provide a reliable and effective wake-up experience, especially for heavy sleepers, the deaf, or hard-of-hearing individuals. Please read this manual carefully to ensure proper setup and operation of your alarm clock.

Package Contents

Upon unpacking, please verify that all items listed below are present:

1 x Mesqool Alarm Clock
1 x Power Cable
1 x Power Adapter
1 x Bed Shaker
1 x User Manual

Contents of the Mesqool alarm clock package laid out: alarm clock, power cable, power adapter, bed shaker, and user manual. — Figure 1: Package Contents

Product Overview

The Mesqool CR1001em alarm clock features a large LED display, intuitive control buttons, a USB charging port, and a powerful wired bed shaker. Its design prioritizes ease of use and effective wake-up functionality.

Mesqool CR1001em alarm clock with large blue LED display and bed shaker, showing a smartphone charging via its USB port. — Figure 2: Front View of the Alarm Clock

Main Components:

Large LED Display: Clearly shows time and alarm status.
Control Buttons: Located on the top for easy access to settings.
USB Charging Port: (5V/1A) For charging external devices.
Bed Shaker Port: Connects the wired bed shaker.
Battery Compartment: Holds 2 AAA batteries for backup (not included).

Rear view of the Mesqool alarm clock connected to power, with the battery compartment open showing AAA batteries, and a smartphone charging via USB. — Figure 3: Rear View with Power, USB, and Battery Compartment

Setup

Power Connection: Connect the power adapter to the alarm clock's DC input port and plug it into a standard 100-240V AC wall outlet. The display will light up.
Install Backup Batteries: Open the battery compartment on the back of the clock and insert 2 new AAA batteries (not included). These batteries maintain time and alarm settings during a power outage but do not power the display or alarm functions.
Connect Bed Shaker: Plug the bed shaker's cable into the designated shaker port on the back of the alarm clock. Place the bed shaker under your mattress or pillow for optimal vibration.

Operating Instructions

1. Setting the Time and Date

Press and hold the 'TIME SET' button to enter time setting mode.
Use the '+' or '-' buttons to adjust hours and minutes.
Press 'TIME SET' again to confirm each step.
To switch between 12-hour and 24-hour format, press the '12/24H' button.
To activate or deactivate Daylight Saving Time (DST), press and hold the 'DST' button.

Image showing the 5-level adjustable dimmer and 12/24H time format, with multiple alarm clocks displaying different brightness levels and time formats. — Figure 4: Time Format and Brightness Adjustment

2. Setting Alarms (Dual Alarm)

The alarm clock supports two independent alarms (Alarm 1 and Alarm 2).

Press and hold the 'ALARM 1' or 'ALARM 2' button to enter alarm setting mode.
Use the '+' or '-' buttons to set the desired alarm time.
Press the respective 'ALARM' button again to confirm the time.
After setting the time, you can select the wake-up mode (Sound, Shaker, or Both) by pressing the 'ALARM' button repeatedly.
To activate/deactivate an alarm, press the 'ALARM 1' or 'ALARM 2' button briefly until the alarm icon appears/disappears on the display.

Image illustrating the dual alarm feature with a large snooze button for an additional 9 minutes of sleep, showing a person in bed and people in an office setting. — Figure 5: Dual Alarm and Snooze Function

3. Snooze Function

When the alarm sounds, press the large 'SNOOZE/OK' button on top of the clock to temporarily silence the alarm for 9 minutes.
The alarm will sound again after 9 minutes. You can repeat this process.
To stop the alarm completely, press any other button (e.g., 'ALARM 1' or 'ALARM 2' button).

A person in bed pressing the large 'SNOOZE OK' button on the Mesqool alarm clock, with the clock displaying 11:10. — Figure 6: Using the Snooze Button

4. Wake-up Modes

The Mesqool CR1001em offers three distinct wake-up modes:

Loud Alarm Sound: An audible alarm up to 106 dB.
Super Bed Shaker: Powerful vibration from the connected shaker.
Sound and Shaker: A combination of both for maximum effectiveness.

You can select your preferred mode during alarm setup or by pressing the 'ALARM MODE' button when the alarm is active.

Image showing three wake-up modes: power vibrator, loud audible alarm (up to 106 dB), and power vibrator & audible alarm, with people waking up. — Figure 7: Three Wake-up Modes

5. Bed Shaker Placement

For optimal performance of the bed shaker, consider the following placements:

Under your pillow.
Under your mattress.
Inside a bowl or cup placed on a bedside table to amplify the vibration.

Three images demonstrating optimal placement for the bed shaker: under a pillow, inside/under a bowl for amplified vibration, and under a fitted sheet. — Figure 8: Recommended Bed Shaker Placements

6. Display Brightness Adjustment

The LED display brightness can be adjusted to 5 levels to suit your preference and environment.

Press the 'DIMMER' button repeatedly to cycle through the 5 brightness levels (LV1 to LV5).
Select the level that provides comfortable visibility without being too bright for sleep.

7. USB Charging Port

The integrated USB port (5V/1A) allows you to conveniently charge your smartphone or other USB-powered devices.

Connect your device's USB charging cable to the USB port on the back of the alarm clock.
Ensure the alarm clock is powered by the AC adapter for the USB charging function to work.

Maintenance

Cleaning: Wipe the alarm clock and bed shaker with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
Battery Replacement: Replace the 2 AAA backup batteries annually or when you notice settings are not retained during power outages. Ensure correct polarity when inserting new batteries.
Storage: If storing the device for an extended period, remove the AAA backup batteries to prevent leakage.

Troubleshooting

Problem	Possible Cause	Solution
Clock display is off.	No AC power.	Ensure the power adapter is securely plugged into the clock and a working wall outlet.
Alarm does not sound/vibrate.	Alarm not activated or incorrect mode selected.	Verify the alarm icon is displayed. Check that the correct wake-up mode (Sound, Shaker, or Both) is selected. Ensure the bed shaker is properly connected.
Settings are lost after power outage.	No backup batteries or batteries are depleted.	Install 2 new AAA batteries in the battery compartment.
USB charging is not working.	Alarm clock not connected to AC power.	Ensure the alarm clock is powered by the AC adapter. The USB port does not function on battery backup alone.

Specifications

Brand: Mesqool
Model Number: CR1001em
Color: Blue
Product Dimensions (L x W x H): 9.1 x 3.81 x 3 cm
Item Weight: 197 g
Material: Acrylonitrile Butadiene Styrene (ABS)
Voltage: 5 Volts
Power Source: AC Powered (with 2x AAA battery backup for settings)
Display Type: Digital LED
Special Features: Vibration, Dual Alarm, Snooze, USB Charging Port (5V/1A), 5-Level Brightness Dimmer, 12/24H Time Format, DST Function
Room Type: Bedroom
Indoor/Outdoor Use: Indoor

Warranty and Support

For any questions, concerns, or technical assistance regarding your Mesqool CR1001em alarm clock, please contact Mesqool customer support. Refer to the contact information provided with your purchase or visit the official Mesqool website for support details.

	Mesqool CR1001EM Pro Alarm Clock User Manual User manual for the Mesqool CR1001EM Pro alarm clock, detailing setup, time setting, alarm configuration, dimmer, USB charging, and troubleshooting.
	Mesqool CR1001eM Alarm Clock with Vibrator User Manual User manual for the Mesqool CR1001eM Alarm Clock with Vibrator, detailing its features, controls, alarm settings, dimmer, DST, USB charging, and vibrator functions. Perfect for heavy sleepers.
	Mesqool CR1025 Digital Alarm Clock Radio with Bluetooth and FM User manual for the Mesqool CR1025 digital alarm clock radio. Features include Bluetooth 5.0 speaker, FM radio, night light, USB/Type-C charging, adjustable dimmer, snooze function, and battery backup. Learn how to set alarms, use Bluetooth, tune FM radio, and adjust settings.
	Mesqool CR1001i Projection Alarm Clock with Bed Shaker - User Manual User manual for the Mesqool CR1001i Projection Alarm Clock with Bed Shaker. Learn how to set time, alarms, use projection features, and connect the bed shaker.
	CR1024 Projection Alarm Clock User Manual User manual for the CR1024 Projection Alarm Clock, detailing setup, time and date settings, alarm functions, projection features, brightness control, temperature/humidity display, and device charging capabilities.
	Mesqool CR1024 Projection Alarm Clock User Manual User guide for the Mesqool CR1024 Projection Alarm Clock, detailing time setting, date setting, DST function, alarm settings, brightness control, temperature/humidity display, night light, projection mode, and device charging.