Feit Electric FC8/3CCT/LED

Feit Electric FC8/3CCT/LED 8-inch Circline LED Light Bulb User Manual

Model: FC8/3CCT/LED

Product Overview

The Feit Electric FC8/3CCT/LED is an 8-inch non-dimmable LED circline light bulb designed for indoor use. This bulb offers selectable color temperatures, allowing users to choose between Warm White, Cool White, or Daylight settings using an integrated switch. It provides 1400 lumens of light output with a 15-watt input power and is rated for 25,000 life hours at 120V.

Key features include:

  • Compact circline design for efficient illumination.
  • Easy plug-and-play installation, eliminating the need to replace or remove old ballasts.
  • Three selectable color temperatures: Neutral White (3500K), Cool White (4000K), or Daylight (6500K).
  • Energy-efficient LED technology with a long lifespan.
  • 1400 Lumens brightness, 15 Watt power consumption, 120V operation.

Safety Information

  • WARNING: Risk of electric shock. Disconnect power before installation or servicing.
  • Do not use with dimmers. This bulb is non-dimmable.
  • Ensure the fixture is rated for the bulb's voltage (120V).
  • Do not disassemble the bulb. There are no user-serviceable parts inside.
  • Suitable for damp locations, but not for direct exposure to water.

Setup and Installation

This LED circline bulb is designed for easy replacement of existing fluorescent circline lamps without requiring ballast removal or rewiring. Follow these steps for proper installation:

  1. Turn Off Power: Before beginning installation, ensure the power to the light fixture is completely turned off at the circuit breaker or fuse box.
  2. Remove Old Bulb: Carefully remove the existing fluorescent circline lamp from the fixture.
  3. Select Color Temperature: Locate the integrated switch on the side of the Feit Electric FC8/3CCT/LED bulb. Before installing, slide the switch to your desired color temperature: Neutral White (3500K), Cool White (4000K), or Daylight (6500K). Note: This switch is difficult to access once installed, so select your preferred color before installation.
  4. Install New Bulb: Insert the pins of the new LED circline bulb into the lamp holder of your fixture. Ensure it is securely seated.
  5. Restore Power: Once the bulb is securely installed, restore power to the fixture.
Feit Electric FC8/3CCT/LED circline bulb showing the integrated color temperature selection switch.

Image: Feit Electric FC8/3CCT/LED circline bulb with its integrated switch for color temperature selection. The switch allows selection between Neutral White (3500K), Cool White (4000K), and Daylight (6500K) before installation.

Packaging for Feit Electric 8 inch Circular Lamp with selectable white feature.

Image: Product packaging for the Feit Electric 8-inch Circular Lamp, highlighting its selectable white feature and key specifications like 15W power usage, 1400 lumens, and T9 replacement.

Operating Instructions

Once installed, the Feit Electric FC8/3CCT/LED bulb operates like a standard light bulb. Use your existing wall switch to turn the light fixture on or off.

  • Color Temperature Selection: The desired color temperature (Warm White, Cool White, or Daylight) must be selected using the switch on the bulb itself before installation. It cannot be changed via the wall switch.
  • Non-Dimmable: This bulb is not compatible with dimmer switches. Using it with a dimmer may cause damage to the bulb or the dimmer, and will void the warranty.

Maintenance

The Feit Electric FC8/3CCT/LED bulb requires minimal maintenance.

  • Cleaning: Ensure the power is off before cleaning. Wipe the bulb with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
  • Replacement: Due to its long lifespan, frequent replacement is not expected. When replacement is necessary, follow the "Setup and Installation" steps in reverse to remove the old bulb and install a new one.

Troubleshooting

If you experience issues with your Feit Electric FC8/3CCT/LED bulb, refer to the following common problems and solutions:

ProblemPossible CauseSolution
Bulb does not light up.No power to the fixture.
Bulb not properly installed.
Faulty bulb.
Check circuit breaker/fuse.
Ensure bulb pins are fully seated in the lamp holder.
Test bulb in a known working fixture or replace.
Light flickers or is dim.Incompatible dimmer switch.
Loose connection.
This bulb is non-dimmable. Remove any dimmer switches and use a standard on/off switch.
Re-seat the bulb firmly.
Incorrect color temperature.CCT switch set incorrectly.Turn off power, remove bulb, and adjust the CCT switch to the desired setting before re-installing.

Specifications

SpecificationValue
Model NameFC8/3CCT/LED
BrandFeit Electric
Light TypeLED
Special FeatureNon Dimmable, Selectable Color Temperature
Wattage15 Watts
Incandescent Equivalent Wattage22 Watts
Bulb Shape SizeFC8 (8-inch Circline)
Bulb BaseGX53
Voltage120 Volts
Brightness1400 Lumens
Color Temperature OptionsNeutral White (3500K), Cool White (4000K), Daylight (6500K)
Average Life25,000 Hours (approx. 2.86 Years)
Indoor/Outdoor UsageIndoor (Suitable for Damp Locations)
MaterialPlastic
Product Dimensions8"W x 8"H x 1.5"D
CertificationsETL Listed, FCC Compliant

Warranty and Support

For warranty information regarding your Feit Electric FC8/3CCT/LED bulb, please refer to the documentation included with your purchase or visit the official Feit Electric website.

If you require further assistance, technical support, or have questions not covered in this manual, please contact Feit Electric customer service directly. Contact details can typically be found on the product packaging or their official website.

Feit Electric Official Website: www.feit.com

Related Documents - FC8/3CCT/LED

Preview Feit Electric T96 Plug and Play Linear LED Lamp: Safety Instructions and Installation Guide
Comprehensive safety instructions and installation guide for the Feit Electric T96 Plug and Play Linear LED Lamp, covering installation, warranty, and FCC compliance. Learn how to safely replace fluorescent tubes with this LED alternative.
Preview Feit Electric T12 Plug and Play LED Lamp Installation Guide & Safety Instructions
This guide from Feit Electric provides essential safety information and step-by-step instructions for installing their T12 Plug and Play Linear LED lamps, designed as a direct replacement for fluorescent tubes.
Preview Feit Electric T8 Ballast Bypass Linear Lamp Installation Guide
Comprehensive safety instructions and installation guide for the Feit Electric T8 Ballast Bypass Linear LED Lamp, including wiring diagrams and warranty information.
Preview FEIT Electric 7.5 Inch Dimmable LED Flat Panel Ceiling Light with Selectable Color - Use and Care Guide 74206/6WYCA
Explore the FEIT Electric 7.5 Inch Dimmable White Round Flat Panel Ceiling Light (Model 74206/6WYCA). This guide provides essential use and care instructions, installation steps for junction box and recessed can mounting, and details on selecting color temperature.
Preview Feit Electric Rechargeable LED Shop Light with Motion Detection - Installation and Safety Guide
Comprehensive guide for the Feit Electric 2 ft. Rechargeable LED Shop Light with Motion Detection (Model SHOP2/840/50/MOT/BAT), covering important safety instructions, specifications, parts, installation, and operation.
Preview Feit Electric Smart Bulb User Guide: Setup for Alexa and Google Home
Comprehensive user guide for Feit Electric smart bulbs, detailing setup instructions for Amazon Alexa and Google Assistant, app features, device management, and troubleshooting.