Hisense WDBL1014VS 10/7 kg Washing Machine User Manual

1. Important Safety Information

Please read this manual thoroughly before operating your new washing machine. Keep it for future reference. Always follow basic safety precautions to reduce the risk of fire, electric shock, or injury.

• Ensure the appliance is properly grounded.
• Do not allow children to play on or in the appliance.
• Do not wash articles that have been previously cleaned in, washed in, soaked in, or spotted with gasoline, dry-cleaning solvents, or other flammable or explosive substances.
• Unplug the appliance before cleaning or performing any maintenance.
• Do not install or store this appliance where it will be exposed to the weather or freezing temperatures.

2. Product Overview

The Hisense WDBL1014VS is a front-load washing machine with a 10 kg washing capacity and 7 kg drying capacity, featuring Inverter Technology for efficient and quiet operation. It offers 16 programs and a maximum spin speed of 1400 RPM.

Figure 2.1: Front view of the Hisense WDBL1014VS washing machine, showing the control panel, detergent drawer, and large front-loading door.

3. Setup and Installation

3.1 Unpacking and Inspection

• Remove all packaging materials, including the polystyrene base and any protective film.
• Remove the transport bolts located at the rear of the machine. Keep these bolts for future transport.
• Inspect the appliance for any damage. If damaged, do not install or operate it.

3.2 Location and Leveling

Place the washing machine on a firm, level floor. Adjust the leveling feet at the bottom of the machine to ensure it is stable and balanced. An unbalanced machine can cause excessive vibration and noise.

3.3 Water Supply Connection

Connect the inlet hose to a cold water tap with a 3/4-inch thread. Ensure all connections are tight to prevent leaks. Do not use old hoses; always use the new hoses supplied with the appliance.

3.4 Drain Hose Connection

Securely attach the drain hose to a standpipe or laundry tub. Ensure the drain hose is not kinked or blocked. The end of the drain hose should be positioned at a height between 60 cm and 100 cm from the floor.

Figure 3.1: Rear view of the washing machine, illustrating the water inlet and drain hose connections.

3.5 Electrical Connection

Plug the power cord into a grounded electrical outlet. Ensure the voltage and frequency match the specifications on the rating label of the appliance. Do not use extension cords or adapters.

3.6 Initial Use

Before washing clothes for the first time, run a short cycle without laundry and detergent to clean the drum and remove any manufacturing residues. Select a 'Drum Clean' or 'Quick Wash' program for this purpose.

4. Operating Instructions

4.1 Control Panel Overview

Figure 4.1: Detailed view of the control panel, showing the program selector knob, digital display, and option buttons.

• Program Selector Knob: Turn to select desired wash/dry program.
• Display Screen: Shows program duration, selected options, and error codes.
• Temp Button: Adjusts wash water temperature.
• Rinse Button: Adds extra rinse cycles.
• Spin Button: Adjusts spin speed or selects 'No Spin'.
• Options Button: Selects additional functions (e.g., Pre-wash, Intensive).
• Dry Level Button: Selects desired drying level (for wash & dry programs).
• Delay End Button: Sets a delayed start time for the cycle.
• Start/Pause Button: Starts, pauses, or resumes a cycle.
• Power Button: Turns the appliance on or off.

4.2 Loading Laundry

Open the door and load laundry loosely into the drum. Do not overload the machine; ensure there is enough space for clothes to tumble freely. For optimal washing and drying, adhere to the specified capacities (10 kg wash, 7 kg dry).

Figure 4.2: The washing machine door is open, revealing the stainless steel drum, ready for laundry loading.

4.3 Adding Detergent and Additives

Pull out the detergent dispenser drawer. Add detergent to the main wash compartment and fabric softener to the designated compartment. Do not exceed the 'MAX' fill line.

Figure 4.3: The detergent dispenser drawer is open, showing compartments for detergent and fabric softener.

4.4 Selecting a Program

Turn the program selector knob to choose one of the 16 available programs. Common programs include:

• Cotton Dry: For drying cotton items.
• Synthetics Dry: For drying synthetic items.
• Refresh: A quick cycle to freshen clothes.
• 60' Wash & Dry: A combined wash and dry cycle for smaller loads.
• Skin Care: Gentle wash for sensitive skin.
• Baby Care: Hygienic wash for baby clothes.
• Silk/Delicate: For delicate fabrics.
• Drum Clean: For cleaning the washing machine drum.
• Cotton: Standard wash for cotton items.
• Wool: Gentle wash for woolens.
• Quick 15': Very short wash cycle for lightly soiled items.
• Mix: For mixed fabric loads.
• Jeans: Specific program for denim.
• Rinse+Spin: For rinsing and spinning only.
• Spin: For spinning only.

4.5 Adjusting Options

After selecting a program, use the corresponding buttons to adjust temperature, spin speed, add extra rinses, or set a delay end time. The selected options will be displayed on the screen.

4.6 Starting a Cycle

Press the 'Start/Pause' button to begin the selected program. The door will lock, and the machine will start filling with water.

4.7 Pausing/Canceling a Cycle

To pause a running cycle, press the 'Start/Pause' button. To cancel a cycle, press and hold the 'Start/Pause' button for a few seconds, or turn the program selector knob to 'Off' and then back on to select a new program.

4.8 End of Cycle

The machine will signal the end of the cycle. The door will unlock after a short delay. Remove laundry promptly to prevent wrinkles.

5. Maintenance and Cleaning

Regular maintenance ensures optimal performance and extends the lifespan of your washing machine.

5.1 Cleaning the Detergent Dispenser

Pull out the dispenser drawer completely. Remove any removable parts and rinse them under running water. Clean the drawer housing with a brush. Reassemble and reinsert the drawer.

5.2 Cleaning the Drum

Use the 'Drum Clean' program regularly (e.g., once a month) to prevent odor and residue buildup. You may add a washing machine cleaner to the detergent dispenser for enhanced cleaning.

5.3 Cleaning the Door Seal

Wipe the rubber door seal after each wash to remove lint, dirt, and moisture. This prevents mold and unpleasant odors.

5.4 Cleaning the Drain Pump Filter

The drain pump filter should be cleaned periodically to prevent blockages. Locate the filter cover at the bottom front of the machine. Place a shallow container underneath to catch any residual water. Unscrew the filter, remove any debris, rinse it, and screw it back in securely.

5.5 Cleaning the Water Inlet Filter

If the water supply is restricted, the inlet filter may be clogged. Turn off the water supply and disconnect the inlet hose. Use pliers to pull out the filter from the valve and clean it under running water. Reinsert and reconnect the hose.

6. Troubleshooting

Before contacting service, refer to the following table for common issues and their solutions.

7. Specifications

Figure 7.1: Dimensional diagram of the washing machine (Height: 84.5 cm, Width: 59.5 cm, Depth: 66 cm).

8. Warranty and Support

This Hisense WDBL1014VS washing machine comes with a 2-year warranty from the date of purchase. Please retain your proof of purchase for warranty claims.

For installation services or technical support, please contact Hisense authorized service centers:

• Riyadh: +966-11-4094006 Ext – 113
• Jeddah: +966-12-6577714
• Dammam: +966-13-8343691
• Qassim: +966 581044198
• Abha: +966 593322785

For further assistance, you may also visit the official Hisense website or contact their customer service.