Westclox Wireless Charging Digital Alarm Clock

Introduction

Thank you for choosing the Westclox Wireless Charging Digital Alarm Clock. This device combines a clear digital alarm clock with a dimmable night light, a wireless charging pad, and a USB charging port, making it a versatile addition to your bedside table or study desk. This manual provides detailed instructions for setup, operation, and maintenance to ensure optimal performance.

For your safety and to prevent damage to the product, please read these instructions carefully before use and retain them for future reference.

Safety Information

• Do not expose the device to water or excessive moisture.
• Avoid placing the device near heat sources or in direct sunlight.
• Do not attempt to disassemble or modify the device. This will void the warranty.
• Use only the provided power cable or a certified USB power adapter.
• Keep out of reach of children.
• Ensure proper ventilation around the device during wireless charging.

Package Contents

Please check the package for the following items:

• Westclox Wireless Charging Digital Alarm Clock
• USB Power Cable
• Instruction Manual

Note: 2 AA batteries for backup power are not included.

Product Overview

Familiarize yourself with the key components and features of your Westclox alarm clock.

Image: Overview of the Westclox Digital Alarm Clock highlighting its features including Qi fast wireless charging, night light with dimmer, large LCD display, electric power with battery backup, USB charging port, and FCC compliance.

• Large LED Display: Clear time display with adjustable brightness.
• Wireless Charging Pad: Located on top for Qi-compatible smartphones.
• USB Charging Port: For charging other devices via USB cable.
• Dimmable Night Light: Integrated light with adjustable brightness levels.
• Control Buttons: Located on the side for time, alarm, and brightness adjustments.
• Battery Backup: Requires 2 AA batteries (not included) to maintain time settings during power outages.

Setup

1. Powering the Device

Connect the provided USB power cable to the clock and plug the other end into a compatible USB power adapter (not included) or a powered USB port. The clock display will illuminate.

2. Installing Backup Batteries

For continuous timekeeping during power interruptions, install 2 AA batteries (not included) into the battery compartment located on the bottom of the clock. Ensure correct polarity (+/-) when inserting the batteries.

Operating Instructions

Setting the Time

1. Press and hold the 'M' button (Mode button) on the side of the clock until the hour digits begin to flash.
2. Use the '+' or '-' buttons to adjust the hour.
3. Press the 'M' button again to switch to minute adjustment. Use '+' or '-' to set the minutes.
4. Press 'M' once more to confirm the time setting.
5. To switch between 12-hour and 24-hour display modes, double-tap the 'M' button.

Setting the Alarm

1. Press the 'M' button once to enter alarm setting mode. The alarm icon will appear, and the hour digits will flash.
2. Use the '+' or '-' buttons to adjust the alarm hour.
3. Press 'M' again to switch to alarm minute adjustment. Use '+' or '-' to set the alarm minutes.
4. Press 'M' once more to confirm the alarm setting. The alarm icon will remain on, indicating the alarm is active.
5. To turn the alarm off, press the 'M' button until the alarm icon disappears from the display.

Snooze Function

When the alarm sounds, tap the top of the clock to activate the snooze function. The alarm will pause for 5 minutes and then sound again. To completely turn off the alarm, press any other button on the clock.

Adjusting Display Brightness

The clock display has multiple brightness levels. Press the '+' or '-' buttons (when not in time/alarm setting mode) to cycle through the brightness options. The display automatically dims between 12 AM and 7 AM.

Using the Night Light

Image: The Westclox Digital Alarm Clock with its top-mounted night light illuminated, showing the time 12:08.

The night light feature offers 3 levels of adjustable brightness. Press the button on the left side of the clock to turn the night light on/off and to cycle through the brightness levels.

Wireless Charging

Image: A smartphone placed on the top surface of the Westclox alarm clock, indicating active wireless charging with a blue light and charging icon on the phone screen.

Place your Qi-compatible smartphone on the wireless charging pad located on the top surface of the clock. Ensure the phone is centered on the pad for optimal charging. A blue indicator light will illuminate to confirm charging is active. Remove any metal objects or thick cases that may interfere with wireless charging.

USB Charging Port

Connect your device's USB charging cable to the USB port (1A) on the side of the alarm clock to charge non-wireless charging compatible devices.

Maintenance

• Clean the clock with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Ensure the charging surfaces are free of dust and debris for efficient wireless charging.
• If the clock will not be used for an extended period, remove the backup batteries.

Troubleshooting

Specifications

Image: A diagram illustrating the dimensions (5.5" L x 3.8" W x 2.9" H) and key features of the Westclox Digital Alarm Clock, including its large LED display, USB charging port, 10W fast wireless charging, night light with dimmer, and sleek design.