EMSON Arctic Air ULTRA PRO Portable Evaporative Air Cooler

Introduction

The EMSON Arctic Air ULTRA PRO is a personal evaporative air cooler designed to provide a comfortable environment by cooling, humidifying, and purifying the air in your immediate personal space. This device utilizes hydro-chill technology to transform hot, dry air into cool, refreshing air without the use of Freon or other chemical refrigerants. It is lightweight, portable, and features multiple fan speeds for customized comfort.

Image: The Arctic Air ULTRA PRO unit shown alongside its retail packaging.

Important Safety Information

Please read all safety instructions carefully before operating this appliance. Failure to follow these instructions may result in electric shock, fire, or personal injury.

• Always place the unit on a flat, level surface to prevent water leakage.
• Do not immerse the unit, power cord, or plug in water or other liquids.
• Keep the unit out of reach of children and pets.
• Unplug the unit from the power outlet when not in use, before filling with water, or before cleaning.
• Do not operate the unit with a damaged cord or plug, or if the unit malfunctions or has been damaged in any manner.
• Do not block air vents.
• Use only the provided power adapter.
• Do not attempt to repair or modify the unit yourself. Contact qualified service personnel for repairs.

Package Contents

Verify that all items are present in the package:

• 1 x Arctic Air ULTRA PRO Unit
• 1 x Power Adapter
• 1 x Evaporative Filter (pre-installed or separate)

Product Overview

Familiarize yourself with the main components of your Arctic Air ULTRA PRO:

• Air Inlet Grille: Where ambient air enters the unit.
• Evaporative Filter: Absorbs water and cools the air as it passes through.
• Water Tank: Reservoir for water, located at the top for easy filling.
• Fan: Draws air through the filter and expels cooled air.
• Control Panel: Includes power button and fan speed controls.
• Adjustable Air Vent: Directs the airflow.

Image: The Arctic Air ULTRA PRO unit, highlighting its compact design and key features.

Setup

1. Placement: Place the Arctic Air ULTRA PRO on a flat, stable, and level surface. Ensure there is adequate space around the unit for proper airflow.
2. Fill Water Tank: Open the top fill water tank. Carefully pour clean, cool water into the tank until it reaches the MAX fill line. Do not overfill. For enhanced cooling, you may pre-chill the water or place the evaporative filter in a freezer before use (refer to image below).
3. Connect Power: Plug the provided power adapter into the unit's power port, then plug the adapter into a standard electrical outlet.

Image: Illustration of adding water to the unit and an optional step of freezing the evaporative filter for colder air.

Operating Instructions

Once set up, operating your Arctic Air ULTRA PRO is straightforward:

1. Power On/Off: Press the power button on the control panel to turn the unit on or off. The unit will typically start on a low fan speed.
2. Adjust Fan Speed: Press the fan speed button repeatedly to cycle through the three available fan speeds (low, medium, high). Select the speed that provides your desired level of cooling.
3. Direct Airflow: Adjust the multi-directional air vent to direct the cool air towards your personal space.
4. Hydro-Chill Technology: The unit draws in hot air, which then passes through the wet evaporative filter. As water evaporates from the filter, it cools and humidifies the air, which is then expelled by the fan. This process also helps to purify the air.

Image: A diagram illustrating how hot air enters the unit, passes through the wet filter, and is expelled as cool, humidified air.

Maintenance

Regular maintenance ensures optimal performance and longevity of your Arctic Air ULTRA PRO.

• Water Tank Cleaning: Empty and clean the water tank regularly, especially if the unit will not be used for an extended period. Use a soft cloth and mild soap if necessary, then rinse thoroughly.
• Evaporative Filter Care: The evaporative filter should be cleaned periodically. Remove the filter and rinse it under cool water. Allow it to air dry completely before reinserting. Replace the filter every 3-6 months, or sooner depending on usage and water quality, to maintain optimal cooling and air purification.
• Exterior Cleaning: Wipe the exterior of the unit with a soft, damp cloth. Do not use abrasive cleaners or solvents.
• Storage: Before storing, ensure the water tank is empty and dry, and the filter is clean and dry. Store the unit in a cool, dry place.

Troubleshooting

Specifications

Warranty and Support

EMSON products are manufactured to high-quality standards. For information regarding warranty coverage, product support, or to purchase replacement parts (such as evaporative filters), please refer to the contact information provided with your purchase documentation or visit the official EMSON website.

Please retain your proof of purchase for warranty claims.