1. Product Overview
The vidaXL Black Metal Bed Frame, model 324817, is designed to provide a sturdy and comfortable foundation for your mattress. Constructed from durable powder-coated metal with melamin-coated MDF accents, this bed frame offers a sleek industrial style suitable for various bedroom decors. It features a robust slatted base for reliable mattress support.
Note: A mattress is not included with this bed frame. The frame is designed for a mattress size of 160 x 200 cm.
Image 1.1: The vidaXL Black Metal Bed Frame in a typical bedroom environment, showcasing its design and size.
2. Safety Information
Please read and understand all safety warnings and assembly instructions before beginning assembly and using the product. Failure to follow these instructions may result in injury or damage to the product.
- Assembly Required: This item requires assembly. Ensure all parts are correctly aligned and securely fastened before use.
- Weight Limit: Observe the maximum weight recommendation of 200 kg. Do not exceed this limit to prevent structural damage or injury.
- Stable Installation: Assemble the bed frame on a flat, stable surface. Ensure the frame is securely and stably mounted.
- Children: Keep small parts and packaging materials away from children during assembly to prevent choking hazards.
- Regular Checks: Periodically check all bolts and connections to ensure they remain tight. Retighten if necessary.
3. Package Contents
Before assembly, verify that all components are present and undamaged. If any parts are missing or damaged, do not proceed with assembly. Contact customer support for assistance.
The package typically includes:
- Metal frame components (side rails, headboard/footboard sections, central support beams)
- Slatted base (Spjäla)
- Support legs
- Assembly hardware (screws, bolts, washers, nuts)
- Assembly tools (e.g., screwdriver)
4. Setup and Assembly
Assembly requires approximately 2 people. A screwdriver is recommended for assembly, and all necessary assembly tools are included.
4.1 Preparation
- Clear a spacious area for assembly.
- Unpack all components and lay them out on a soft, clean surface to prevent scratches.
- Identify all parts against the parts list (if provided in the physical manual).
4.2 Assembly Steps
- Assemble the Main Frame: Connect the side rails to the headboard and footboard sections using the provided hardware. Do not fully tighten bolts until the entire frame is assembled.
- Install Central Support: Attach the central support beam(s) and their corresponding legs to the main frame. Ensure these are positioned correctly for optimal support.
- Attach Slatted Base: Place the slatted base onto the frame. Secure the slats according to the design, ensuring they are evenly spaced and firmly seated.
- Final Tightening: Once all components are in place and aligned, fully tighten all bolts and screws. Do not overtighten.
- Placement: Carefully move the assembled bed frame to its desired location.
Image 4.1: Underside view illustrating the metal frame structure and central support legs.
Image 4.2: Top view of the bed frame, highlighting the integrated slatted base for mattress support.
5. Operating (Usage)
This bed frame is designed for indoor use only.
- Place a suitable mattress (160 x 200 cm) directly onto the slatted base. No box spring is required.
- Ensure the bed frame is placed on a level surface to prevent wobbling and ensure stability.
- Avoid standing or jumping on the bed frame, as this can exceed the weight limit and cause damage or injury.
6. Maintenance
Proper care will extend the life and appearance of your bed frame.
- Cleaning: Wipe the metal and MDF surfaces with a dry cloth. Avoid abrasive cleaners or harsh chemicals that could damage the finish.
- Inspections: Periodically inspect all connections and hardware. Tighten any loose bolts or screws to maintain structural integrity.
- Avoid Moisture: Keep the bed frame in a dry environment. Prolonged exposure to moisture can lead to rust or damage to the MDF components.
7. Troubleshooting
If you encounter issues with your bed frame, refer to the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Bed frame is wobbly or unstable. | Loose connections; uneven floor. | Ensure all bolts and screws are fully tightened. Move the bed to a level surface or use shims under legs if necessary. |
| Squeaking noises. | Loose connections; friction between metal parts or slats. | Tighten all hardware. Apply a small amount of lubricant (e.g., silicone spray) to points of friction if tightening does not resolve the issue. |
| Difficulty during assembly. | Incorrect part orientation; overtightening too early. | Review the assembly steps carefully. Ensure parts are oriented correctly before tightening. Avoid fully tightening bolts until all major components are loosely assembled. |
8. Specifications
| Feature | Detail |
|---|---|
| Brand | vidaXL |
| Model | 324817 |
| Color | Black |
| Material | Powder-coated metal, Melamine-coated MDF |
| Overall Dimensions (L x W x H) | 164 x 208 x 32.5 cm |
| Sleeping Height from Floor | 32.5 cm |
| Recommended Mattress Size (W x L) | 160 x 200 cm (Mattress not included) |
| Maximum Weight Recommendation | 200 kg |
| Item Weight | 22.8 kg |
| Assembly Required | Yes |
| Recommended Persons for Assembly | 2 |
| Recommended Assembly Tools | Screwdriver (included) |
| Care Instructions | Wipe with a dry cloth |
| Usage Environment | Indoor |
Image 8.1: Dimensional diagram of the bed frame, indicating length, width, and height.
9. Warranty and Support
For warranty information or customer support, please refer to the purchase documentation or contact vidaXL directly through their official website or the retailer where the product was purchased. Ensure you have your model number (324817) and proof of purchase available when contacting support.
You can visit the vidaXL store for more information: vidaXL Store
