1. Introduction
Thank you for choosing the TEFAL Express Steam FV2835 iron. This manual provides essential information for the safe and efficient use of your appliance. Please read all instructions carefully before first use and keep them for future reference.
Figure 1.1: The TEFAL Express Steam FV2835 iron, showcasing its white and burgundy design with a transparent water tank.
2. Product Features
- 2400W High Power: Ensures rapid heat-up and continuous, strong steam output for efficient ironing.
- Ceramic Soleplate: Provides smooth gliding over fabrics and even heat distribution.
- Powerful Continuous Steam (up to 35 g/min): Steam penetrates fabric fibers, loosening them for easier wrinkle removal.
- Powerful Steam Shot (up to 160 g/min): Effectively removes stubborn creases from various fabrics.
- Anti-Drip Protection: Prevents water droplets from staining your garments during ironing.
- Large 270 ml Water Tank: Allows for quick and easy refilling, reducing interruptions during ironing sessions.
Figure 2.1: The ceramic soleplate of the iron, designed for optimal steam diffusion and smooth gliding.
3. Setup
- Unpacking: Carefully remove the iron and all accessories from the packaging. Retain the packaging for future storage or transport.
- First Use Preparation: Before first use, it is recommended to iron an old piece of fabric to remove any manufacturing residues from the soleplate.
- Filling the Water Tank:
- Ensure the iron is unplugged and cooled down.
- Open the water tank inlet cover.
- Fill the tank with clean tap water up to the 'MAX' level indicator. Do not overfill.
- Close the inlet cover securely.
- Connecting to Power: Plug the power cord into a suitable grounded electrical outlet (220-240V).
4. Operating Instructions
4.1. Temperature Setting
Rotate the temperature dial to select the appropriate heat setting for your fabric type. Always check the garment's care label. The iron will heat up quickly, indicated by the pilot light turning off when the desired temperature is reached.
4.2. Steam Ironing
For steam ironing, ensure the water tank is filled and the temperature dial is set to a steam-compatible setting (usually indicated by steam symbols on the dial). The iron must be hot enough to produce steam.
Figure 4.1: The iron actively releasing steam, demonstrating its powerful steam output for effective wrinkle removal.
4.3. Dry Ironing
For dry ironing, ensure the steam control is set to the 'no steam' position. This is suitable for delicate fabrics or when steam is not desired.
4.4. Steam Shot Function
Press the steam shot button for an extra burst of steam to tackle stubborn wrinkles. Wait a few seconds between shots to allow the iron to reheat and build up steam pressure.
4.5. Vertical Steaming
The steam shot function can also be used for vertical steaming of hanging garments or curtains. Hold the iron vertically a few centimeters away from the fabric and press the steam shot button.
Figure 4.2: Top-down view of the iron gliding smoothly over a grey fabric, illustrating its ease of use during ironing.
5. Maintenance
5.1. Cleaning the Soleplate
After each use, allow the iron to cool down completely. Wipe the soleplate with a damp cloth to remove any residue. For stubborn stains, use a specialized soleplate cleaning stick, following its instructions.
5.2. Descaling (Anti-Calc System)
Your iron is equipped with an anti-calc system to reduce limescale build-up. For optimal performance, regularly perform the self-cleaning function as described in the full product manual (if applicable) or follow general descaling procedures for steam irons.
5.3. Storage
Always empty the water tank after each use. Store the iron upright on its heel rest to protect the soleplate. Ensure the cord is neatly wrapped around the cord wrap area (if available) or secured to prevent damage.
Figure 5.1: The iron safely stored in an upright position on an ironing board, ready for its next use.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Iron does not heat up. | Not plugged in; power outlet issue; thermostat setting too low. | Check power connection; test outlet with another appliance; adjust temperature dial. |
| No steam or insufficient steam. | Water tank empty; temperature too low for steam; steam control set to 'dry'. | Fill water tank; set temperature to steam-compatible range; adjust steam control. |
| Water dripping from soleplate. | Temperature too low for steam; anti-drip system not active yet. | Allow iron to heat up fully before using steam; ensure temperature is appropriate for steam. |
| White flakes coming from soleplate. | Limescale build-up. | Perform descaling procedure as per maintenance section. |
7. Specifications
| Feature | Detail |
|---|---|
| Brand | Tefal |
| Model Name | Express Steam |
| Model Number | FV2835 |
| Color | White and Burgundy |
| Product Dimensions | 50 x 50 x 28 cm |
| Product Weight | 1.3 Kilograms |
| Power | 2400 W |
| Voltage | 2835 Volts (Please refer to product label for exact operating voltage) |
| Special Features | Fast heating, Anti-drip |
| Soleplate Material | Ceramic |
| Water Tank Capacity | 270 ml |
| Continuous Steam Output | Up to 35 g/min |
| Steam Shot Output | Up to 160 g/min |
| Manufacturer | Groupe SEB Polska Sp.z o.o. |
| Date First Available | January 8, 2021 |
8. Warranty and Support
This product is covered by a manufacturer's warranty. Please refer to the warranty card included with your purchase for specific terms and conditions, including warranty period and coverage details. Keep your proof of purchase for warranty claims.
For technical support, spare parts, or service, please contact your local Tefal customer service or authorized service center. Contact information can typically be found on the Tefal official website or in the product packaging.
