Muddy Legend XLT 2-Man Tree Stand Instruction Manual

1. Product Overview

The Muddy Legend XLT is an 18-foot, 2-person ladder tree stand designed for hunting. It features heavy-duty DXT steel construction and is rated for up to 500 pounds, accommodating two hunters. The stand includes two full-body harnesses for safety and a comfortable Flex-Tek seat.

Key features include:

• 2-Person Capacity: Designed to comfortably seat two hunters with a 36.5"W x 12.5"D Flex-Tek bench seat and a matching foot platform.
• 18-Foot Height: Provides an elevated position for improved visibility and concealment.
• 500 lb Weight Rating: Robust steel construction supports two individuals and their gear.
• Padded Shooting Rail: Offers a stable rest for firearms and can be flipped up for bow hunting.
• Complete Safety System: Includes two full-body harnesses for user safety during ascent, descent, and while in the stand.
• Easy Installation: Designed for use on trees with a minimum 9-inch diameter, secured with a support bar, ratchet strap, and stabilizer straps.

2. Safety Warnings and Guidelines

Failure to follow these safety warnings and instructions may result in serious injury or death. Always prioritize safety when using this product.

• Read the Entire Manual: Before assembly, installation, or use, read and understand all instructions and warnings.
• Inspect Equipment: Always inspect the tree stand and all its components for damage, wear, or missing parts before each use. Do not use if any part is compromised.
• Full-Body Harness: Always wear a full-body harness (FBH) that meets industry standards. Attach it to the tree from the moment you leave the ground until you return.
• Tree Selection: Select a healthy, live tree with a minimum diameter of 9 inches. Avoid dead, diseased, or leaning trees. Ensure the tree is free of obstructions that could interfere with installation or use.
• Weight Capacity: Do not exceed the maximum weight capacity of 500 pounds (including hunters and gear). This stand is designed for a maximum of two hunters.
• Stable Installation: Ensure the stand is level and securely attached to the tree using all provided straps and support bars. Check for any movement or instability before climbing.
• Three Points of Contact: Maintain three points of contact (two hands and one foot, or one hand and two feet) with the ladder at all times during ascent and descent.
• Weather Conditions: Do not use the tree stand during inclement weather conditions such as rain, ice, snow, or strong winds.
• Alcohol and Drugs: Never use the tree stand under the influence of alcohol, drugs, or any medication that may impair your judgment or physical abilities.
• Children: This product is not intended for use by children.

3. Setup and Installation

3.1 Pre-Assembly Check

Before beginning assembly, unpack all components and verify that all parts are present and undamaged. Refer to the parts list (not provided in this manual, consult manufacturer's packaging) to ensure completeness. If any parts are missing or damaged, do not proceed with assembly; contact Muddy customer service.

3.2 Tree Selection

Choose a healthy, straight tree with a minimum diameter of 9 inches. The tree should be free of loose bark, dead branches, or other hazards. Ensure the area around the tree is clear for safe setup and climbing.

3.3 Assembly Steps

1. Assemble Ladder Sections: Connect the ladder sections according to the manufacturer's instructions, ensuring all bolts and fasteners are securely tightened.
2. Attach Platform and Seat: Secure the stand platform and seat frame to the top ladder section. Ensure the Flex-Tek seat is properly installed.
3. Install Shooting Rail: Attach the padded shooting rail to the stand frame. Verify it can be flipped up and down smoothly.
4. Prepare for Installation: With assistance, carefully raise the assembled stand against the selected tree.

3.4 Securing the Stand to the Tree

1. Positioning: Ensure the stand platform is level and at the desired height.
2. Support Bar: Attach the included support bar from the ladder to the tree, extending it as needed to provide stability.
3. Ratchet Strap: Use the 1-inch ratchet strap to firmly secure the top section of the stand to the tree. Tighten until there is no movement.
4. Stabilizer Straps: Utilize the two 1-inch stabilizer straps to further secure the ladder sections to the tree, preventing lateral movement.
5. Final Check: Before climbing, vigorously shake the stand to confirm it is completely stable and secure. Re-tighten all straps if any movement is detected.

4. Operation

4.1 Safe Ascent and Descent

Always wear your full-body harness and attach it to the tree before leaving the ground. Maintain three points of contact with the ladder at all times while climbing up or down. Climb slowly and deliberately.

4.2 Using the Stand

Once on the platform, carefully transfer your weight to the stand. Ensure your full-body harness remains attached to the tree. The spacious platform and Flex-Tek bench seat are designed for comfort during extended periods.

4.3 Shooting Rail

The padded shooting rail provides a stable rest for firearms. For bow hunting, the rail can be flipped up and out of the way to provide a clear shooting lane. Always ensure the rail is securely in position, whether up or down.

4.4 Foot Platform

The wide foot platform allows for comfortable positioning and movement within the stand. Ensure no gear obstructs your footing.

5. Maintenance

• Regular Inspection: Before and after each use, thoroughly inspect all welds, bolts, straps, and fabric components for any signs of wear, corrosion, cracks, or damage.
• Cleaning: Clean the stand with mild soap and water. Avoid harsh chemicals that could damage the finish or materials. Ensure all components are dry before storage.
• Storage: Store the tree stand in a dry, cool place away from direct sunlight and extreme temperatures. This helps prevent rust and material degradation.
• Strap Replacement: Inspect all straps regularly. Replace any worn, frayed, or damaged straps immediately.

6. Troubleshooting

• Stand Feels Unstable: Re-check all attachment straps (ratchet and stabilizer straps) to ensure they are tightly secured to the tree. Verify the tree is suitable (minimum 9-inch diameter, healthy, straight). Ensure the support bar is properly engaged.
• Missing Parts During Assembly: If you discover missing components during the initial unboxing and assembly, do not proceed. Contact Muddy customer service immediately for assistance.
• Difficulty with Shooting Rail Movement: Check for any obstructions or debris in the hinge mechanism. Ensure all bolts are properly tightened but not over-tightened, which could impede movement.
• Noise During Use: Ensure all connections are tight. Lubricate moving parts with a silicone-based lubricant if necessary, avoiding petroleum-based products that could damage materials.

7. Product Specifications

8. Warranty Information

The Muddy Legend XLT 2-Man Tree Stand comes with a 1 Year Limited Warranty. For specific details regarding coverage, terms, and conditions, please refer to the warranty documentation included with your product or contact Muddy customer service.

9. Customer Support

For technical assistance, missing parts, warranty claims, or any other inquiries regarding your Muddy Legend XLT 2-Man Tree Stand, please contact Muddy customer service. Contact information can typically be found on the product packaging or the official Muddy Outdoors website.

Manufacturer: GSM Outdoors

9.1 Related Product Videos