ANYSECU HB880 Bluetooth Helmet PTT Headset Instruction Manual

1. Introduction

The ANYSECU HB880 is a hands-free Bluetooth headset designed for motorcycle helmets, enabling communication with two-way radios and mobile phones. It features Push-to-Talk (PTT) functionality, allowing seamless switching between radio and phone calls, enhancing safety and convenience during rides. This manual provides detailed instructions for installation, operation, and maintenance of your HB880 headset.

2. Package Contents

Before installation, please verify that all items listed below are present in your package:

• HB880 Bluetooth Main Unit
• Helmet Speakers (2)
• Boom Microphone
• Wireless PTT Controller
• 2-Pin Radio Adapter Cable
• USB Charging Cable
• Helmet Mounting Bracket (Pinch Cock and Sticker options)
• Microphone Windshield Foam

Figure 2.1: Overview of the ANYSECU HB880 Bluetooth Helmet PTT Headset components, including the main unit, speakers, microphone, wireless PTT controller, and radio adapter.

3. Product Overview

The HB880 main unit features intuitive controls for power, volume, and Push-to-Talk (PTT) functions. The wireless PTT controller provides convenient remote activation of the PTT feature.

Figure 3.1: Diagram illustrating the HB880 main unit's connections to a mobile phone, wireless PTT controller, and two-way radio.

Figure 3.2: The HB880 main unit connected to its helmet speakers and boom microphone.

4. Setup and Installation

4.1 Charging the Device

Before first use, fully charge the HB880 main unit. Connect the USB charging cable to the charging port on the unit and to a standard USB power source. Charging typically takes less than 3 hours. The indicator light will change to show charging status.

4.2 Helmet Installation

Follow these steps to properly install the HB880 headset into your motorcycle helmet:

1. Choose Affixing Method: Select either the pinch cock clip for thin-shelled helmets or the adhesive sticker for thick-shelled helmets. The pinch cock is easier to remove, while the sticker provides a more permanent fit.
2. Position the Pedestal: Attach the chosen mounting pedestal to the right side of your helmet. Ensure it is in a position that allows the main unit to be easily accessible and does not obstruct your vision or helmet functionality.
3. Install Earphones and Microphone: Carefully install the earphones inside the helmet, aligning them with your ears. Route the microphone boom towards your mouth, ensuring it is close for clear voice transmission. Hide excess cable within the helmet lining.
4. Attach Main Unit: Slide the HB880 main unit onto the installed pedestal until it locks securely.

Figure 4.1: Step-by-step guide for installing the HB880 Bluetooth headset components into a motorcycle helmet.

Figure 4.2: Visual representation of the HB880 headset installed on a helmet, connected to a two-way radio via adapter, and paired with a wireless PTT controller.

4.3 Connecting to a Two-Way Radio

Use the provided 2-pin adapter cable to connect your HB880 main unit to a compatible two-way radio. Ensure the connection is secure.

4.4 Bluetooth Pairing

The HB880 supports pairing with both mobile phones and the wireless PTT controller.

• Pairing with Mobile Phone:
  1. Ensure the HB880 is powered off.
  2. Press and hold the power button until the indicator light flashes rapidly, indicating pairing mode.
  3. On your mobile phone, go to Bluetooth settings and search for "HB880" or a similar device name.
  4. Select the HB880 to pair. Once connected, the indicator light will change.
• Pairing with Wireless PTT Controller:
  1. Ensure the HB880 is in pairing mode (refer to mobile phone pairing steps).
  2. Activate pairing mode on the wireless PTT controller (refer to its specific instructions, usually a long press of the PTT button).
  3. The devices will automatically connect.

Note: The HB880 can connect to a phone, an adapter, a wireless PTT controller, and a radio simultaneously.

5. Operation

5.1 Power On/Off

• Power On: Press and hold the power button until you hear an audible prompt.
• Power Off: Press and hold the power button until you hear an audible prompt.

5.2 Volume Control

Use the volume buttons on the HB880 main unit to adjust the audio level. Press the '+' button to increase volume and the '-' button to decrease volume.

5.3 Push-to-Talk (PTT) Function

The PTT button on the main unit or the wireless PTT controller activates transmission on your connected two-way radio. Press and hold to transmit, release to listen.

Figure 5.1: The HB880 main unit highlighting the PTT button, shown in a motorcycle riding context.

5.4 Communication Modes

The HB880 supports multiple communication modes:

• Phone Call Mode: When a phone call is received, the headset will automatically switch to phone call mode.
• Radio Priority Mode: Two-way radio signals take priority over other audio sources.
• Mixed Mode: Allows listening to navigation audio from a phone while maintaining radio communication.

The device features automatic switching between connected devices based on activity.

6. Maintenance

• Cleaning: Wipe the main unit and other components with a soft, dry cloth. Avoid using harsh chemicals or abrasive cleaners.
• Storage: Store the device in a cool, dry place when not in use.
• Battery Care: To prolong battery life, avoid fully discharging the battery frequently. Charge the device regularly, especially if stored for extended periods.
• Microphone Windshield: Ensure the microphone windshield foam is securely attached to prevent it from falling off during use.

7. Troubleshooting

8. Specifications

• Model: HB880-K
• Bluetooth Version: V4.1 Class2
• Operation Range: 10 meters (33 feet)
• Bluetooth Profiles: HFP, HSP, PTT
• Talking Time: Approximately 50 hours
• Standby Time: Approximately 300 hours
• Charging Time: Less than 3 hours
• Dimensions (Main Unit): Approximately 5.91 x 3.15 x 3.94 inches
• Manufacturer: Anysecu
• UPC: 049500289744

Figure 8.1: Summary of key features and specifications for the HB880 headset.

9. Warranty and Support

For warranty information or technical support, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase for any warranty claims.