ASCEND Replacement Watch Band for Skagen Watches (22mm) - Installation and Care Guide

1. Product Overview

The ASCEND replacement watch band is crafted from calfskin leather and features a screw-based attachment system. It is designed to replace existing 22mm bands on compatible Skagen watch models.

Image: The ASCEND 22mm replacement watch band, displaying its camel-colored leather and silver-toned buckle. The reverse side of one strap piece is visible, marked 'GENUINE LEATHER'.

Compatible Skagen Watch Models:

• 233XXL Series: 233XXLSLCB, 233XXLRLB, 233XXLBLBC, 233XXLSLD, 233XXLGL, 233XXLRLD
• SKW6000 Series: SKW6024, SKW6025, SKW6053, SKW6082, SKW6098, SKW6099, SKW6100, SKW6101, SKW6103, SKW6104, SKW6105, SKW6106, SKW6107, SKW6108, SKW6109, SKW6110, SKW6142, SKW6143, SKW6162, SKW6163, SKW6164, SKW6165, SKW6183, SKW6184, SKW6191, SKW6192, SKW6194, SKW6195, SKW6196, SKW6198, SKW6199, SKW6202, SKW6203, SKW6232, SKW6234, SKW6236, SKW6243, SKW6254, SKW6292
• Other Models: SKW2190, 355XLSS, A355XLSLB, 355XLSSB, 355XLSSNA, 355XLGLD, 733XLTTM, 733XLSS, 733XLSLB
• This band is compatible with all 22mm screw construction watches.

2. Package Contents

Verify that all items are present in the package:

• 1 x ASCEND Replacement Watch Band (two pieces)
• 4 x Screws (for attachment)
• 1 x Installation Tool

3. Setup (Installation)

Follow these steps to replace your watch band. Ensure you work on a clean, soft surface to prevent scratches to your watch.

1. Prepare Your Watch: Carefully remove your existing watch band. Most Skagen watches with screw-based bands require unscrewing the small screws on the side of the watch lugs that secure the band. Use the provided tool or a suitable small screwdriver. Keep the original screws in a safe place if you intend to reuse the old band.
2. Orient the New Band: Identify the two pieces of the new ASCEND watch band. One piece will have the buckle attached, and the other will be longer with multiple holes for adjustment.


Image: The two separate pieces of the ASCEND watch band, clearly showing the small holes at each end where the screws will be inserted to attach to the watch lugs.

3. Attach the First Band Piece: Align one end of a new band piece with the corresponding lug on your watch. Each band piece has two small holes at its end. These holes should align with the screw holes on your watch lug.
4. Insert Screws: Insert two of the provided screws into the aligned holes. Use the installation tool to gently tighten the screws. Do not overtighten, as this can damage the screws or the watch lugs. Ensure the band piece is securely fastened but can still pivot slightly.


Image: A close-up view of the watch band's buckle and the end of the strap, highlighting the two small screw holes for attachment to the watch case.

5. Attach the Second Band Piece: Repeat steps 3 and 4 for the second band piece on the other watch lug.
6. Verify Installation: Gently tug on both band pieces to ensure they are securely attached to the watch. Check that the screws are flush and not protruding.

4. Operating (Wearing and Adjustment)

To wear your watch with the new band:

1. Place the watch on your wrist.
2. Thread the longer end of the band through the buckle.
3. Select the hole that provides a comfortable and secure fit. The band should be snug but not too tight, allowing for slight movement without rotating freely.
4. Secure the buckle pin into the chosen hole.
5. Slide the excess strap through the two leather loops to keep it tidy.

5. Maintenance and Care

Proper care will extend the life and appearance of your leather watch band:

• Avoid Water Exposure: Leather is susceptible to water damage. Avoid prolonged exposure to water, sweat, and high humidity. If the band gets wet, gently wipe it dry with a soft cloth and allow it to air dry naturally, away from direct heat or sunlight.
• Cleaning: For light cleaning, wipe the band with a soft, slightly damp cloth. For deeper cleaning, use a specialized leather cleaner according to its instructions. Avoid harsh chemicals or abrasive materials.
• Conditioning: Periodically apply a small amount of leather conditioner to keep the leather supple and prevent cracking.
• Storage: When not in use, store your watch in a cool, dry place, away from direct sunlight.

6. Troubleshooting

• Band Does Not Fit My Watch:
  Solution: Verify that your watch model is listed in the compatible models section (Section 1). Ensure your watch requires a 22mm band with a screw-based attachment system. If your watch uses spring bars, this band is not compatible.
• Screws Are Difficult to Insert/Tighten:
  Solution: Ensure the band's holes are perfectly aligned with the watch lug's screw holes. Do not force the screws. If resistance is met, realign and try again. Check for any debris in the screw holes.
• Leather Appears Damaged Upon Arrival:
  Solution: Inspect the band immediately upon receipt. If there is any manufacturing defect or damage, contact customer support for assistance.

7. Specifications

8. Warranty Information

Specific warranty details for this product are not provided in the available information. For warranty inquiries, please contact the manufacturer or the seller directly.

9. Customer Support

If you encounter any issues or have questions not addressed in this manual, please contact the ASCEND customer support or the retailer from whom you purchased the product for further assistance.