U`King DJ Laser Lights (Model ZQ03046) Instruction Manual

1. Introduction

The U`King DJ Laser Lights (Model ZQ03046) are designed to create dynamic lighting effects for various events. This device features four lenses with red, yellow, blue, and green LED colors, offering over 100 patterns and 300 graphics. It supports multiple operating modes including Automatic, Sound Control, DMX, and Master-Slave, making it suitable for both professional DJs and beginners. The fan-shaped design ensures a wide irradiation area, effectively illuminating any corner of a room.

Figure 1: U`King DJ Laser Lights, showcasing the four distinct colored beams.

2. Safety Information

• Laser Radiation: Avoid direct eye exposure to the laser beam. Do not look directly into the laser apertures.
• Installation: Ensure the device is securely mounted to prevent accidental falls.
• Ventilation: Do not block ventilation openings. Ensure adequate airflow around the unit to prevent overheating.
• Power: Use only the specified power adapter (AC100-240V/2A, 50/60Hz). Disconnect power before cleaning or servicing.
• Environment: Do not expose the device to rain, moisture, or extreme temperatures. Keep away from flammable materials.
• Children: Keep out of reach of children.

3. What's in the Box

Upon unpacking, please verify that all items listed below are included and in good condition:

• U`King DJ Laser Lights Unit (Model ZQ03046)
• Power Cable
• Remote Control
• Mounting Bracket with Screws
• User Manual (this document)

Figure 2: Included power cable and mounting bracket.

4. Setup

4.1 Mounting

The U`King DJ Laser Lights can be placed on a flat surface or mounted to a truss, wall, or ceiling using the provided mounting bracket. Ensure the mounting surface is stable and can support the weight of the unit.

1. Attach the mounting bracket to the unit using the supplied screws.
2. Secure the unit to your desired location (truss, wall, ceiling) ensuring it is firmly fixed.
3. Adjust the angle of the light as needed.

4.2 Power Connection

Connect the power cable to the unit's power input and then to a compatible power outlet (AC100-240V, 50/60Hz).

Figure 3: Power input and switch on the rear panel.

5. Operating Modes

The U`King DJ Laser Lights offer four primary operating modes, selectable via the control panel on the rear of the unit or the included remote control.

Figure 4: Rear control panel with mode selection options.

5.1 Automatic Mode

In Automatic Mode, the light unit cycles through its pre-programmed patterns and effects without external input. This mode is ideal for quick setup and continuous operation.

Figure 5: Automatic Mode icon.

5.2 Sound Control Mode

The Sound Control Mode allows the light effects to synchronize with the rhythm of music or ambient sound. The built-in microphone detects sound, and the patterns and colors respond dynamically. The light will automatically turn off eight seconds after the music ends.

Figure 6: Sound Control Mode icon.

Adjust the sound sensitivity using the 'SENSITIVITY' knob on the rear panel to fine-tune its response to music.

Figure 7: Sound sensitivity adjustment knob.

5.3 DMX Mode

For advanced control, the DMX Mode allows integration with a DMX controller. This enables precise customization of patterns, colors, and movement. Connect a DMX cable to the 'DMX IN' port and configure the DMX address using the DIP switches on the rear panel.

Figure 8: DMX ports and DIP switches for DMX configuration.

5.4 Master-Slave Mode

In Master-Slave Mode, multiple U`King DJ Laser Lights units can be linked together to perform synchronized light shows. Connect the 'DMX OUT' of the master unit to the 'DMX IN' of the first slave unit, and continue linking subsequent slave units in a daisy chain. The master unit controls all linked slave units.

Figure 9: Master-Slave Mode icon.

6. Remote Control

The included remote control provides convenient wireless operation of the U`King DJ Laser Lights. It allows you to switch between modes, adjust settings, and select patterns from a distance.

Figure 10: Remote control for easy operation.

Functions typically include:

• Power ON/OFF
• Mode Selection (Auto, Sound, DMX)
• Pattern Selection
• Color Selection (RGBY)
• Strobe Speed Adjustment
• Motor Speed Adjustment
• Sound Sensitivity Adjustment

7. Product in Action

Observe the U`King DJ Laser Lights in various operational scenarios, demonstrating its capabilities and effects.

Figure 11: Examples of diverse laser patterns and effects.

Figure 12: The laser lights creating an immersive atmosphere at an event.

8. Maintenance

Regular maintenance ensures optimal performance and longevity of your U`King DJ Laser Lights.

• Cleaning: Periodically clean the lenses with a soft, lint-free cloth to maintain clear light output. Do not use abrasive cleaners.
• Ventilation: Ensure the ventilation openings are free from dust and debris. Use compressed air to clear any blockages.
• Storage: When not in use, store the unit in a cool, dry place away from direct sunlight and extreme temperatures.

9. Troubleshooting

10. Specifications

Figure 13: Detailed product specifications.

11. Warranty and Support

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official U`King website. Keep your purchase receipt as proof of purchase for any warranty claims.