PAUTIX COB CCT Tunable White LED Strip Light Kit User Manual

1. Introduction

Thank you for choosing the PAUTIX COB CCT Tunable White LED Strip Light Kit. This kit provides versatile and high-quality lighting solutions, allowing you to adjust both brightness and color temperature from warm white (2700K) to cool white (6500K). This manual will guide you through the installation, operation, and maintenance of your new LED strip lights to ensure optimal performance and longevity.

2. Product Features

• Tunable White COB LED Strip: Seamlessly adjust color temperature from 2700K (warm white) to 6500K (cool white) to suit various moods and activities.
• High Density COB Design: Features 1920 LEDs per spool for super bright, uniform illumination without visible light spots, offering a 180-degree beam angle.
• Dimmable: Full 0-100% dimming capability to achieve desired light intensity.
• RF Remote Control: 360-degree multidirectional control for easy adjustment of color temperature and brightness. Includes memory function, 60-second delay off, and 3 scene modes.
• Easy Installation: Equipped with strong 3M adhesive for reliable mounting on clean, dry, smooth surfaces. Flexible design allows for various applications.
• Durable Construction: Built with a true double-layer PCB and high-quality materials for a lifespan exceeding 50,000 hours.
• Safety Certified: UL Listed power supply ensures safe operation.

3. Package Contents

Please check the package carefully to ensure all items are present and in good condition.

• 1 x PAUTIX 9.84ft (3M) Tunable White COB LED Strip
• 1 x 24V/1A UL Listed Power Supply
• 1 x RF Remote Control
• 1 x Controller Receiver
• 1 x User Manual

Figure 3.1: Complete PAUTIX COB CCT LED Strip Light Kit components.

4. Safety Information

• Ensure the power supply is disconnected before installation or maintenance.
• Do not bend the LED strip sharply or at angles less than 90 degrees to avoid damaging the circuit.
• Do not immerse the LED strip or power supply in water. This product is designed for indoor use only.
• Use only the provided power supply. Using an incompatible power supply may damage the product or pose a safety risk.
• Keep out of reach of children.
• Do not cover the LED strip with flammable materials when in operation.
• If any damage is observed, discontinue use immediately and contact customer support.

5. Setup and Installation

1. Prepare the Surface: Ensure the installation surface is clean, dry, and smooth. Dust, dirt, or moisture can weaken the adhesive.
2. Measure and Cut (Optional): If needed, the LED strip can be cut at designated cutting marks (usually indicated by a copper pad and scissor icon). Ensure to cut only at these marks to avoid damaging the circuit.
3. Peel and Stick: Carefully peel off the backing from the 3M adhesive tape on the back of the LED strip. Press the strip firmly onto the desired surface, ensuring good contact along its entire length.
4. Connect the Controller: Connect the 4-pin head of the COB strip to the controller receiver. The anti-drop design ensures a stable connection.
5. Connect Power Supply: Plug the power supply into the controller receiver, then plug the power supply into a standard wall outlet.

Figure 5.1: Various application examples for the LED strip lights.

6. Operating Instructions

6.1 RF Remote Control Functions

The included RF remote control allows for comprehensive control of your LED strip lights. The 360-degree multidirectional signal means you don't need to point it directly at the receiver.

Figure 6.1: RF Remote Control features.

• Power Button (Red): Turns the lights On/Off.
• Brightness Adjustment (+/-): Increases or decreases the light brightness (0-100% dimming).
• Color Temperature Buttons (2700K, 3000K, 4000K, 5000K, 6500K): Directly select preset color temperatures.
• Color Temperature Adjustment (Arrows): Fine-tune the color temperature between warm and cool white.
• 60S Delay Off: Activates a 60-second delay before turning off the lights, allowing time to exit the room.
• Scene Modes (3 Icons): Cycles through pre-programmed lighting scenes (e.g., reading, relaxation, work).
• Memory Function: The controller remembers the last brightness and color temperature setting when turned off and on again.

Figure 6.2: Color temperature options from 2700K to 6500K.

Figure 6.3: Dimming levels from 0% to 100%.

Figure 6.4: Remote control features in use, including delay and scene modes.

7. Maintenance

• Cleaning: Ensure the power is off before cleaning. Use a soft, dry cloth to wipe the LED strip and controller. Do not use abrasive cleaners or solvents.
• Adhesive Check: Periodically check the adhesive to ensure the strip remains securely attached. If it starts to peel, re-secure it with additional adhesive if necessary.
• Storage: If storing the LED strip for an extended period, ensure it is clean, dry, and stored in a cool, dark place.

8. Troubleshooting

9. Specifications

Figure 9.1: EU Energy Efficiency Label.

10. Warranty and Customer Support

PAUTIX provides a lifetime customer service for this product. If you encounter any issues or have questions regarding your COB CCT LED Strip Light Kit, please do not hesitate to contact our customer support team. Please refer to your purchase documentation for specific warranty terms and contact information.