Introduction
This manual provides essential instructions for the safe and efficient use of your Kastar AC Wall Battery Charger. Please read this manual thoroughly before using the product and retain it for future reference.
Safety Information
WARNING:
- To prevent fire or moisture hazards, use this charger in dry locations only.
- To reduce the risk of electric shock, do not remove the cover (or back plate). No user-serviceable parts are inside. Refer servicing to qualified service personnel.
- Do not disassemble the unit.
- Ensure the charger is compatible with your battery type and voltage before use.
- Keep out of reach of children.
The charger is designed for AC 100-240V, 50-60Hz input. Output is DC 4.2V 600mA.
Product Overview
The Kastar AC Wall Battery Charger is a compact and portable device designed to charge compatible camera batteries. It features a foldable flat pin for convenient storage and travel.
Image 1: Kastar AC Wall Battery Charger with its foldable prongs in the stored position.
Image 2: Kastar AC Wall Battery Charger with its AC prongs extended, ready for use.
Key Features:
- Foldable flat pin for easy storage.
- LED indicator for charging status.
- Universal AC input voltage (100-240V).
Setup
- Unpack the Charger: Carefully remove the charger from its packaging. Inspect for any visible damage.
- Extend AC Prongs: Gently pull out the foldable AC prongs from the charger body until they lock into place.
- Insert Battery: Align your compatible camera battery with the charging contacts on the charger. Insert the battery firmly into the charging slot. Ensure a secure connection.
- Connect to Power: Plug the charger into a standard AC wall outlet (100-240V).
Image 3: Close-up view of the Kastar charger showing the battery slot and charging contacts.
Operating Instructions
Once the charger is plugged into an AC outlet with a battery inserted:
- The LED indicator will illuminate RED, indicating that the battery is currently charging.
- When the battery is fully charged, the LED indicator will turn GREEN.
- Once the LED turns green, remove the battery from the charger.
- Unplug the charger from the wall outlet when not in use.
Charging times may vary depending on the battery capacity and its current charge level.
Maintenance
- Cleaning: Disconnect the charger from the power outlet before cleaning. Use a soft, dry cloth to wipe the exterior of the charger. Do not use liquid cleaners or solvents.
- Storage: When not in use, store the charger in a cool, dry place. Fold the AC prongs back into the charger body for compact storage.
- Inspection: Periodically inspect the charger for any signs of damage, such as frayed wires or cracked casing. If damage is found, discontinue use and contact support.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| LED does not light up when plugged in. | No power from outlet; charger not properly plugged in; battery not inserted correctly; faulty charger. | Check the wall outlet with another device. Ensure the charger is fully plugged in. Re-insert the battery, ensuring good contact. If problem persists, the charger may be faulty. |
| LED remains RED after extended charging time. | Battery not fully charged; battery is faulty; charger is faulty. | Allow more time for charging. Try charging a different, known-good battery. If the issue persists with multiple batteries, the charger may be faulty. |
| Charger or battery becomes excessively hot during charging. | Faulty battery; faulty charger; improper ventilation. | Immediately disconnect from power. Ensure the charger is in a well-ventilated area. Do not use the battery or charger if excessive heat continues. Contact support. |
Specifications
- Brand: Kastar
- Model Number: NOCAR-0B-LB060-U
- Input: AC 100-240V, 50/60Hz
- Output: DC 4.2V, 600mA
- Item Weight: 2.4 ounces
- UPC: 605832445304
- ASIN: B08RSV6GLH
Compatible Camera Models
This charger is compatible with batteries used in the following camera models:
- Ordro DDV Series: DDV-5100HD PLUS, DDV-5200HD, DDV-5300HD, DDV-5500HD, DDV-5600HD, DDV-V8, DDVV8 PLUS
- Ordro HDV Series: HDV-A20, HDV-D328, HDV-Z20, HDV-Z25, HDV-Z28, HDV-Z30, HDV-Z50S, HDV-Z58
- OUCCA Models: DDV-A10, DDV-V8S, DV-K109, DVH-592II, HDV-A28, HD-180, HD-500A, HD-A1, HD-A70, HD-H9, HD-V128A, HD-V500
- Pamiel DDV Series: DDV-P31, DDV-P32, DDV-P33, DDV-P35, DDV-P38
- Pamiel HD Series: HD-17A, HD-51B, HD-53B, HD-55B, HD-58B, HD-63B, HD-66B, HD-68B, HD-69B, HD-316B, HD-350B
- Pamiel Other Models: P-F01, HDV-568, HDV-578, HDV-D503FS
- Phisung Models: SDV-568, SDV-568II, SDV-660, SDV-668
- Praktica Models: DVC-14.1, DVC14.1 HDMI, iR16, DX-1, DX1, DV-HD12
- Rekam ALLURE Series: HDC-1531, HDC-1532, HDC-1533
- Rekam BIZZARO Series: HDC-2531, HDC-2532
- Rekam PREZIO Series: HDC-3531, HDC-3533, HDC-3535
- Rich DVH Series: DVH-R30, DVH-R50, DVH-R55, DVH-566, DVH-566II, DVH-592+, DVH-592II
- Rich HD Series: HD-23, HD-A70, HD-Q1, HD-Q3, HD-Q5, HD-Q6, HD-Q8, HD-Q9, HDV-CP319, HDV-CP350, M-HD01
- Rollei Models: HD-MI8K, HD-X1200, SD-X1200, SD-X1800, W0005, W-0005
- Soulycin Models: FHD-A803, HDV-A921, HDV-C903, HDV-C913, SDV-C503, SDV-C603, DV-20C, HD-200C, HD-400C, HD-520B HDD-600B, HDD-3000A, HDD-4000A
- TCL Model: 818FHD
- Vivikai Models: HD-A70, HD-998, HD-Q8, DVR-940HD, DVR940HD
- Werlisa Models: DV-S550HD, DVS550HD
- Winait DC Series: DC-E10
- Winait DV Series: DV-12S, DV-81, DV-518, DV-592T, DV-K109, DV-K118, DV-Q1, DV-T90, DV-T90+
- Winait Other Models: DDV-592, DV-592+, HD-A70, HD-Q5, HD-M01
- Yashica Models: ADV-518HD, ADV-528HD, YHD-AS62, Pink Petit, DVC-H1000D
Warranty and Support
Kastar products are designed for reliability and performance. For specific warranty information, please refer to the documentation included with your purchase or visit the official Kastar website. For technical support or inquiries, please contact Kastar customer service through their official channels.
You can find more information and contact details on the Kastar Store on Amazon.