1. Introduction
Thank you for choosing the Hunter Original 51123 52-inch Indoor/Outdoor Ceiling Fan. This manual provides essential information for the safe installation, operation, and maintenance of your new ceiling fan. The Hunter Original combines trusted quality with an iconic design, featuring SureSpeed technology for optimized, high-speed cooling. It is damp-rated, making it suitable for covered outdoor areas like patios and porches, as well as large indoor rooms.
Key features of your Hunter Original ceiling fan include:
- SureSpeed Technology: Delivers faster, more focused airflow while maintaining quiet, wobble-free performance.
- Versatile Use: 52-inch fan suitable for both indoor and covered outdoor environments.
- Traditional Design: A classic aesthetic that has provided superior performance for decades.
- Pull Chain Control: Convenient and dependable adjustment of fan speed without a remote.
- Whisper Quiet Motor: Equipped with a 3-speed WhisperWind motor for powerful, ultra-quiet airflow and reversible settings for year-round comfort.
2. Important Safety Information
Please read all instructions carefully before beginning installation. Failure to follow these instructions could result in electric shock, fire, or personal injury.
- Always disconnect power at the circuit breaker or fuse box before installation or servicing.
- All wiring must be in accordance with national and local electrical codes. If you are unfamiliar with wiring, consult a qualified electrician.
- The mounting structure must be capable of supporting the weight of the fan (approximately 43.2 lbs).
- Ensure the fan blades are installed at least 7 feet (2.1 meters) from the floor and at least 18 inches (0.46 meters) from any wall or obstruction.
- Do not operate the fan with damaged blades or housing.
- Avoid placing objects in the path of the fan blades.
- This fan is damp-rated for covered outdoor use; do not expose it directly to water.
3. Package Contents
Verify that all components are present before beginning installation:
- Fan Motor Assembly
- 5 Fan Blades
- Blade Brackets
- Downrod and Hanging Ball Assembly
- Canopy and Mounting Bracket
- Pull Chain
- Hardware Pack (screws, washers, wire nuts)
- Instruction Manual
Figure 1: Hunter Original 51123 52-inch Ceiling Fan, Matte Silver finish with five blades.
4. Setup & Installation
Professional installation is recommended for safety and optimal performance. Ensure the power is OFF at the circuit breaker before proceeding.
- Mounting Bracket Installation: Secure the mounting bracket to the ceiling junction box. Ensure the junction box is securely fastened to the building structure and can support the fan's weight.
- Downrod Assembly: Insert the downrod through the canopy and hanging ball. Feed the motor wires through the downrod.
- Hanging the Fan: Carefully lift the fan motor assembly and place the hanging ball into the mounting bracket.
- Wiring Connections: Connect the fan's electrical wires to the household wiring according to the wiring diagram provided in the separate detailed installation guide. Use the included wire nuts.
- Canopy Installation: Slide the canopy up to the ceiling and secure it to the mounting bracket with the provided screws.
- Blade Assembly: Attach the fan blades to the blade brackets, then secure the blade brackets to the motor housing. Ensure all screws are tightened.
- Final Checks: Double-check all connections and ensure no wires are pinched. Restore power at the circuit breaker.
Video 1: Overview of the Hunter Original Ceiling Fan, showcasing its design and features. This video provides a visual context for the product's appearance and functionality.
5. Operating Instructions
Your Hunter Original ceiling fan is controlled by a traditional pull chain.
- Turning On/Off: Pull the chain once to turn the fan on. Continue pulling to cycle through speeds. Pulling the chain after the highest speed will turn the fan off.
- Speed Control: The fan typically has three speeds (High, Medium, Low). Each pull of the chain will change the speed setting.
- Reversible Motor: The fan features a reversible motor for year-round comfort. A switch on the motor housing (usually a small slide switch) allows you to change the direction of blade rotation.
- Summer Operation (Downward Airflow): Set the switch to make the blades rotate counter-clockwise, pushing air down to create a cooling breeze.
- Winter Operation (Upward Airflow): Set the switch to make the blades rotate clockwise, drawing air up towards the ceiling to redistribute warm air.
Video 2: Demonstrating Hunter's SureSpeed Innovation, highlighting the enhanced airflow and performance you can expect from your fan.
Video 3: Another perspective of the Hunter Original Ceiling Fan, emphasizing its classic design and smooth operation.
6. Maintenance
Regular maintenance ensures the longevity and optimal performance of your ceiling fan.
- Cleaning: Use a soft brush or lint-free cloth to clean the fan blades and motor housing. Do not use abrasive cleaners or solvents, as these can damage the finish.
- Blade Cleaning: For the Matte Silver finish and wood-look blades, a dry or slightly damp cloth is sufficient.
- Tightening Screws: Periodically check all screws on the blade attachments and mounting hardware. Tighten any loose screws to prevent wobbling and noise.
- Motor Lubrication: The Hunter Original features an oil-bath motor designed for smooth operation for decades, typically requiring no additional lubrication. Refer to the full installation manual for specific motor maintenance details if needed.
7. Troubleshooting
If you experience issues with your ceiling fan, consult the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Fan will not start | No power to the fan; loose wire connections; motor switch in off position. | Check circuit breaker/fuses; ensure all wire connections are secure; verify pull chain is engaged. |
| Fan wobbles | Loose blade screws; unbalanced blades; loose mounting hardware. | Tighten all blade and mounting screws; ensure blades are balanced (a balancing kit may be required). |
| Noisy operation | Loose screws; fan not properly seated; internal motor issue. | Check and tighten all screws; ensure the fan is securely mounted; if noise persists, contact customer support. |
| Airflow is weak | Incorrect blade direction (winter setting); fan speed too low. | Ensure the reversible motor switch is set for downward airflow (summer setting); pull chain to increase fan speed. |
8. Specifications
- Brand:
- Hunter
- Model Name:
- Hunter Original
- Model Number:
- 51123
- Color:
- Matte Silver
- Electric Fan Design:
- Ceiling Fan
- Power Source:
- AC
- Style:
- Country Rustic
- Product Dimensions:
- 52"D x 52"W x 13.67"H
- Room Type:
- Bedroom, Living Room, Patio, Porch, Garage
- Special Feature:
- Corded (Pull Chain Control)
- Recommended Uses:
- Cooling
- Wattage:
- 60 watts
- Finish Type:
- Matte
- Number of Blades:
- 5
- Voltage:
- 120V
- Switch Type:
- Pull Chain
- Item Weight:
- 43.2 Pounds
- Included Components:
- Blades, Motor, Pull Chain
- Indoor/Outdoor Usage:
- Indoor, Outdoor (Damp-rated)
- Control Method:
- Pull Chain
- Efficiency:
- 87 CFM / Watt
- Number of Power Levels:
- 3
- Motor Type:
- DC motor
- Installation Type:
- Hardwired
- UPC:
- 049694511232
9. Warranty & Support
Warranty Information: Your Hunter Original ceiling fan comes with a limited lifetime motor warranty. This warranty is backed by Hunter Fan Company, a manufacturer with over 130 years of experience in the fan business, ensuring long-term reliability and support for your product.
Customer Support: For further assistance, technical questions, or warranty claims, please refer to the contact information provided in your product packaging or visit the official Hunter Fan Company website. When contacting support, please have your model number (51123) and purchase date available.
