EGLO Orme 20-inch Flush Mount LED Dimmable Ceiling Light Fixture

1. Introduction and Overview

The EGLO Orme ceiling light fixture is designed to provide contemporary illumination for various indoor spaces. This 20-inch flush mount fixture features a unique two-toned shade with a textured outer surface and a white plastic diffuser, ensuring a softened, warm ambient glow. This manual provides essential information for the safe installation, operation, and maintenance of your EGLO Orme light fixture.

EGLO Orme 20-inch White Flush Mount LED Ceiling Light Fixture.

2. Safety Information

Please read and understand all instructions before beginning installation. Failure to do so may result in electric shock, fire, or other injuries that could be fatal or cause property damage.

• Always disconnect power at the main circuit breaker before installation or servicing.
• Consult a qualified electrician if you are unsure about the installation process.
• This fixture is designed for indoor, dry locations only. Do not expose to water or moisture.
• Ensure all electrical connections are secure and comply with local codes and ordinances.
• Do not attempt to modify the fixture. Any modifications may void the warranty and create a safety hazard.

3. Package Contents

Verify that all components are present before proceeding with installation:

• EGLO Orme 20-inch Flush Mount LED Light Fixture (1 unit)
• Mounting Hardware Kit (screws, wire nuts, mounting bracket)
• Instruction Manual

4. Setup and Installation

Follow these steps for proper installation of your EGLO Orme light fixture:

1. Turn Off Power: Before starting, ensure the power to the junction box is turned off at the circuit breaker.
2. Prepare Mounting Surface: Ensure the ceiling surface is clean, dry, and capable of supporting the fixture's weight.
3. Attach Mounting Bracket: Secure the mounting bracket to the junction box using the provided screws. Ensure it is firmly attached.
4. Make Electrical Connections: Connect the fixture's wires to the corresponding house wires:
   • Connect the black wire from the fixture to the black (live) wire from the junction box.
   • Connect the white wire from the fixture to the white (neutral) wire from the junction box.
   • Connect the green or bare copper ground wire from the fixture to the ground wire from the junction box.
   Use wire nuts to secure all connections.
5. Mount the Fixture: Carefully align the fixture with the mounting bracket and secure it in place using the provided screws. Ensure no wires are pinched during this step.
6. Restore Power: Once the fixture is securely mounted and all connections are made, restore power at the circuit breaker.

EGLO Orme light fixture installed in a bedroom setting, providing ambient lighting.

5. Operating Instructions

The EGLO Orme fixture is designed for simple operation:

• Turning On/Off: Use a standard wall switch connected to the fixture's circuit to turn the light on or off.
• Dimming Functionality: This fixture is dimmable. To utilize the dimming feature, ensure you have a compatible LED dimmer switch installed on the circuit. Follow the dimmer switch manufacturer's instructions for operation.

EGLO Orme light fixture illuminating a modern living room space.

6. Maintenance

The EGLO Orme light fixture requires minimal maintenance:

• Cleaning: To clean the fixture, ensure power is off. Use a soft, dry, or slightly damp cloth. Do not use abrasive cleaners or solvents, as these can damage the finish or electrical components.
• LED Light Source: This fixture uses an integrated LED light source, which is designed for long-term use and does not require bulb replacement.

Close-up view of the EGLO Orme 20-inch flush mount LED light fixture.

7. Troubleshooting

If you experience issues with your EGLO Orme light fixture, refer to the following common problems and solutions:

8. Specifications

Detailed technical specifications for the EGLO Orme 20-inch Flush Mount LED Dimmable Light Fixture:

• Model Name: Orme Collection
• Model Number: 204726A
• Brand: EGLO
• Dimensions: 19.88"L x 19.88"W x 4.53"H
• Weight: 4.3 pounds
• Color: White
• Material: Metal, Plastic
• Style: Contemporary
• Light Fixture Form: Close to Ceiling
• Light Source Type: Integrated LED
• Wattage: 30 watts
• Brightness: 2000 Lumens
• Color Temperature: 3000 Kelvin (Warm White)
• Voltage: 120 Volts
• Special Features: Dimmable, Energy Efficient
• Installation Type: Flush Mount
• Indoor/Outdoor Usage: Indoor only
• Assembly Required: Yes

Technical diagram showing the dimensions of the EGLO Orme 20-inch flush mount light fixture.

9. Warranty

This EGLO Orme light fixture is covered by a 1-year manufacturer's warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from improper installation, accident, misuse, abuse, or unauthorized modifications. Please retain your proof of purchase for warranty claims.

10. Support

For further assistance, technical support, or warranty inquiries, please contact EGLO customer service. Refer to the EGLO official website or product packaging for the most current contact information.