JKING H2B

JKING H2B Electric Skateboard Longboard User Manual

Model: H2B | Brand: JKING

1. Introduction

Thank you for choosing the JKING H2B Electric Skateboard Longboard. This manual provides essential information for the safe operation, maintenance, and troubleshooting of your electric skateboard. Please read this manual thoroughly before your first ride to ensure optimal performance and safety.

Top-down view of the JKING H2B Electric Skateboard Longboard, showcasing its wooden deck and black grip tape.

Image: JKING H2B Electric Skateboard Longboard.

2. Safety Information

Riding an electric skateboard can be dangerous. Always wear appropriate safety gear, including a helmet, knee pads, and elbow pads. Ride within your skill level and be aware of your surroundings. Do not ride in traffic, on wet surfaces, or at night without proper lighting. Always check your skateboard before each ride for any loose parts or damage.

  • Always wear a helmet and protective gear.
  • Do not ride under the influence of alcohol or drugs.
  • Adhere to local traffic laws and regulations.
  • Avoid riding on uneven surfaces, potholes, or obstacles.
  • Ensure the remote control is fully charged and paired before riding.
  • Maximum load capacity: 210 lbs.

3. Package Contents

Upon unboxing, please verify that all items listed below are included:

  • JKING H2B Electric Skateboard Longboard
  • Wireless Remote Control
  • Power Adapter (Charger)
  • T-Tool (for maintenance)
  • User Manual
Package contents of JKING H2B Electric Skateboard including skateboard, remote, charger, T-tool, and manual.

Image: JKING H2B Electric Skateboard and its accessories.

4. Product Overview

Familiarize yourself with the main components of your JKING H2B Electric Skateboard:

  • Deck: Constructed from two layers of bamboo and six layers of maple for durability and flexibility.
  • Hub Motors: Integrated into the rear wheels, providing power and a clean design.
  • Battery Enclosure: Houses the UL 2272 certified 29.4V 4000mAh lithium battery.
  • Charge Port: Located on the battery enclosure for recharging.
  • Power Button: To turn the skateboard on/off.
  • Handles: Integrated into the deck for easy carrying.
Underside view of JKING H2B Electric Skateboard highlighting hub motors, charge port, power button, and handles.

Image: Key components of the JKING H2B Electric Skateboard.

5. Setup

5.1. Initial Charging

  1. Locate the charging port on the side of the battery enclosure.
  2. Connect the power adapter to the charging port.
  3. Plug the power adapter into a standard electrical outlet.
  4. The battery indicator lights on the remote control (or skateboard, if available) will show charging progress.
  5. A full charge takes approximately 4 hours. Disconnect the charger once fully charged.

5.2. Remote Control Pairing

Your remote control should be pre-paired with the skateboard. If re-pairing is necessary:

  1. Ensure both the skateboard and remote control are turned off.
  2. Turn on the skateboard by pressing and holding its power button for about 1 second.
  3. Turn on the remote control by pressing its power button.
  4. The remote control display should show a connection status. If not, refer to the troubleshooting section.
Handheld remote control for JKING Electric Skateboard showing buttons for acceleration, brake, power, reverse, and speed modes.

Image: JKING Electric Skateboard Remote Control.

6. Operating Instructions

6.1. Power On/Off

  • To turn on the skateboard: Press and hold the power button on the battery enclosure for approximately 1 second.
  • To turn on the remote control: Press its power button.
  • To turn off the skateboard: Press and hold the power button on the battery enclosure until it powers down.
  • To turn off the remote control: Press and hold its power button until the display turns off.

6.2. Speed Modes

The JKING H2B offers 3 speed modes (Low, Medium, High) for different riding preferences and skill levels. Use the speed adjustment buttons on the remote control to switch between modes.

  • Low Speed: Ideal for beginners or crowded areas.
  • Medium Speed: Balanced speed for general cruising.
  • High Speed: For experienced riders seeking maximum speed (up to 16.7 MPH).

6.3. Acceleration and Braking

The remote control features a throttle wheel for precise control:

  • Acceleration: Gently push the throttle wheel forward to accelerate.
  • Braking: Gently pull the throttle wheel backward to engage the brakes.
  • Practice accelerating and braking in a safe, open area before riding in public.

6.4. Riding Tips

  • Start in Low Speed mode to get accustomed to the board's response.
  • Maintain a balanced stance with feet shoulder-width apart.
  • Lean into turns to steer the board.
  • Be mindful of your speed, especially when turning or on downhill slopes.
  • Always be prepared to dismount safely if necessary.

7. Maintenance

  • Cleaning: Wipe the board clean with a damp cloth. Avoid direct water spray on electronic components.
  • Battery Care: Charge the battery regularly, even when not in use, to prolong its lifespan. Do not overcharge or completely drain the battery.
  • Wheel Inspection: Regularly check wheels for wear and tear. Replace worn wheels to maintain optimal performance and safety.
  • Tighten Hardware: Use the provided T-tool to periodically check and tighten all nuts and bolts, especially on the trucks and wheel axles.
  • Storage: Store the skateboard in a cool, dry place away from direct sunlight and extreme temperatures.

8. Troubleshooting

ProblemPossible CauseSolution
Skateboard not turning onLow battery; Power button not pressed correctlyCharge the skateboard; Press and hold the power button for 1 second.
Remote not connectingSkateboard off; Remote battery low; Pairing issueEnsure skateboard is on; Charge remote; Re-pair remote (see Section 5.2).
Reduced range or speedLow battery; Riding uphill; Heavy load; Worn wheelsFully charge battery; Ride on flatter terrain; Check load capacity; Inspect and replace wheels.
Unusual noisesLoose hardware; Debris in wheels/motorsTighten all bolts; Clean wheels and motor area.

Troubleshooting Video: Remote Connection

Video: Demonstrates how to troubleshoot remote connection issues with the JKING Electric Skateboard.

9. Specifications

  • Brand: JKING
  • Model Name: H2B
  • Motor: 700W Hub-Motor (Dual 350W Brushless Hub-Motors)
  • Top Speed: 16.7 MPH
  • Range: 8.2 Miles
  • Battery: 29.4V 4000mAh Lithium Battery (UL 2272 certified)
  • Charging Time: 4 Hours
  • Deck Material: Two layers of bamboo and six layers of maple
  • Deck Length: 31.7 Inches
  • Deck Width: 9.5 Inches
  • Item Weight: 12.3 Pounds
  • Max Load: 210 lbs
  • Wheel Size: 83mm
  • Wheel Material: Polyurethane
  • Climbing Angle: Max 12°

10. Warranty and Support

For warranty information, technical support, or service inquiries, please contact JKING customer service through the retailer where the product was purchased or visit the official JKING website. Please retain your proof of purchase for warranty claims.

11. Product Videos

JKING Electric Skateboard Longboard Overview

Video: A brief overview of the JKING Electric Skateboard Longboard, highlighting its features and remote control.

JKING H2B Electric Skateboard Features

Video: Showcasing the JKING H2B electric skateboard in action and its various features.

Riding the JKING Electric Skateboard

Video: A demonstration of the JKING Electric Skateboard being ridden, highlighting its smooth operation.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.