JRL FF220C-B
JRL Professional Onyx FF220C-B Cordless Hair Clipper Instruction Manual
Model: FF220C-B | Brand: JRL
Product Overview
The JRL Professional Onyx FF220C-B Cordless Hair Clipper is engineered for professional performance, offering an exceptional cutting experience. It incorporates patented Reset IQ Charge Technology, which ensures consistent charging to 100% even after prolonged use, providing up to 5 hours of runtime. The patented Smart-Clip Technology intelligently senses blade resistance and adjusts motor speed, preventing dragging or stalling for a consistently smooth and even cut. With two adjustable speeds (6,000 & 7,500 RPM), it maintains constant power throughout its operation. The clipper is equipped with an Onyx Fade Precision Blade, designed to help achieve a fresh fade look with a maximum length of 3.5mm. Its quiet motor creates a comfortable work environment, and the advanced lever locking feature provides 5 steady level locking adjustments with infinite variable control for long-term stability. Additionally, the patented Cool Blade Technology keeps the blade cool to the touch, outperforming most clippers in a 30-minute test, and the blade is interchangeable with most professional clipper brands. An intuitive LED display indicates the remaining battery time in the current speed setting.
The JRL Professional Onyx FF220C-B Cordless Hair Clipper, shown here on its charging dock, features a sleek black design with an LED display indicating battery life and speed settings.
Important Safety Information
This hair clipper is intended for use by trained professionals. Improper use can result in injury or damage to the clipper. Ensure you are familiar with the operation and care instructions before use.
Components and Accessories
The JRL Professional Onyx FF220C-B comes with the following components:
- 1 Screwdriver
- 1 Brush
- 1 Lubricant Oil
- 1 Blade Protector
- 10 Comb Guards (½#, 1#, 1-1/2#, 2#, 3#, 4#, 5#, 6#, 7#, 8#)
- 1 US Plug Reset IQ Charging Dock
Side view of the JRL Professional Onyx FF220C-B clipper, highlighting the adjustable lever and blade.
Setup
Initial Charging
The clipper features Patented Reset IQ Charge Technology. For optimal battery life, perform an initial charge.
- Connect the charging dock to a power outlet using the provided US Plug.
- Place the clipper onto the charging dock.
- A full charge takes approximately 3 hours for regular charging, or 5 hours for Reset IQ Charging. The LED display will indicate charging status and remaining battery time.
Attaching Comb Guards
Select the desired comb guard from the included set (½#, 1#, 1-1/2#, 2#, 3#, 4#, 5#, 6#, 7#, 8#). Align the comb guard with the clipper blade and push firmly until it clicks into place.
Operating Instructions
Powering On/Off and Speed Adjustment
To power on the clipper, press the power button. The LED display will illuminate, showing the current battery percentage and speed setting.
The clipper has 2 adjustment speeds: 6,000 RPM and 7,500 RPM. Use the speed adjustment button to toggle between these settings based on your cutting needs.
To power off, press and hold the power button.
Blade Adjustment (Lever)
The clipper features an Advanced Lever Locking Feature with 5 steady level locking adjustments and infinite variable control. This allows for precise blade length adjustments for fading and tapering.
The JRL Professional Onyx FF220C-B showing the adjustable lever in an extended position, allowing for precise blade length control.
Maintenance
Cleaning the Blade
After each use, turn off the clipper and remove any hair clippings from the blade using the provided brush.
Oiling the Blade
Regularly apply a few drops of lubricant oil (included) to the blade to ensure smooth operation and prolong blade life. Turn the clipper on for a few seconds after oiling to distribute the oil evenly.
Cool Blade Technology
The special material of the Onyx Fade Precision Blade helps keep it cool during extended use. If the blade becomes warm, allow the clipper to rest before continuing.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Clipper not turning on | Low battery | Charge the clipper fully. |
| Clipper dragging or stalling | Blade resistance / Dull blade | Clean and oil the blade. If issue persists, consider blade replacement. |
| Excessive noise/vibration | Blade misalignment / Lack of lubrication | Ensure blade is properly aligned. Apply lubricant oil. |
An alternative view of the JRL Professional Onyx FF220C-B, showcasing its ergonomic design which aids in comfortable handling during use and maintenance.
Product Specifications
- Product Dimensions: 6 x 6 x 9 inches; 12.7 ounces
- Item Weight: 360 Grams
- Color: Black
- Hair Type: All
- Power Source: Battery Powered
- Manufacturer: JRL
- Run Time: Max 5 Hours
- Charge Time: 3 Hours (Regular), 5 Hours (Reset IQ Charging)
- Motor Speeds: 6,000 & 7,500 RPM
- Blade Type: Onyx Fade Precision Blade (Max. length: 3.5mm)
Warranty and Support
For warranty information and customer support, please refer to the official JRL website or contact their customer service directly. Keep your purchase receipt for warranty claims.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.