PAXCESS 20V 12-Inch Cordless String Trimmer User Manual

Important Safety Instructions

Read all instructions carefully before operating the tool. Failure to follow all instructions listed below may result in electric shock, fire, and/or serious personal injury.

General Safety Rules

• Work Area Safety: Keep the work area clean and well-lit. Cluttered or dark areas invite accidents.
• Electrical Safety: Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges, and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
• Personal Safety: Always wear eye protection and sturdy footwear. Use hearing protection when operating the trimmer for extended periods. Do not overreach. Keep proper footing and balance at all times.
• Tool Use and Care: Do not force the tool. Use the correct tool for your application. Do not use the tool if the switch does not turn it on and off. Any tool that cannot be controlled with the switch is dangerous and must be repaired.
• Battery Pack Use and Care: Recharge only with the charger specified by the manufacturer. Do not use battery packs or tools that are damaged or modified.

Specific Safety Rules for String Trimmers

• Before Operation: Inspect the area to be trimmed for any objects that could be thrown or become entangled in the cutting line. Remove all debris, rocks, wire, and other foreign objects.
• Operation: Keep all bystanders, children, and pets at least 50 feet (15 meters) away from the operating area. Never operate the trimmer without the guard in place.
• Maintenance: Disconnect the battery pack before performing any maintenance, cleaning, or removing material from the tool.

Product Overview

The PAXCESS SF8A220 Cordless String Trimmer is designed for efficient lawn grooming and edging. Familiarize yourself with its components for safe and effective use.

Figure 1: Complete PAXCESS SF8A220 Cordless String Trimmer kit, including the main unit, two 20V batteries, charger, and replacement trimmer line spools.

Figure 2: Key features of the trimmer, highlighting the 180° rotatable handle, auto-feed head, dual battery slots, and angle adjustment mechanism.

Components List:

• Main Trimmer Unit (Motor Head, Shaft, Handle)
• Auxiliary Handle
• Safety Guard
• 20V Rechargeable Lithium-Ion Batteries (x2)
• Battery Charger
• Trimmer Line Spools
• Edging Wheels (optional attachment)

Assembly

Follow these steps to assemble your string trimmer before first use.

1. Attaching the Safety Guard

1. Align the safety guard with the slots on the motor head.
2. Push the guard firmly until it clicks into place. Ensure it is securely fastened.

2. Installing the Auxiliary Handle

1. Slide the auxiliary handle onto the main shaft.
2. Adjust the handle to a comfortable position and tighten the locking knob to secure it.

3. Adjusting the Shaft Length

Figure 3: The trimmer features a telescopic rod, allowing length adjustment from 36.6 to 44.5 inches, and can be detached for compact storage.

1. Loosen the locking collar on the main shaft.
2. Extend or retract the shaft to your desired length (36.6 to 44.5 inches).
3. Tighten the locking collar firmly to secure the shaft in position.

4. Battery Installation and Removal

1. Installation: Align the battery pack with the battery port on the trimmer handle. Slide the battery into the port until it clicks securely into place.
2. Removal: Press the battery release button (if present) and slide the battery pack out of the port.

Operation

Proper operation ensures efficient trimming and extends the life of your tool.

1. Charging the Battery

• Connect the charger to a standard power outlet.
• Insert the battery pack into the charger. The indicator light on the charger will show the charging status.
• A full charge typically takes 80 minutes, providing 15-20 minutes of runtime.
• Do not overcharge the battery. Unplug the charger once the battery is fully charged.

2. Starting and Stopping the Trimmer

1. Starting: Ensure the battery is fully charged and securely installed. Press and hold the safety lock-off button, then squeeze the trigger switch.
2. Stopping: Release the trigger switch. The cutting line will stop rotating.

3. Trimming Techniques

Figure 4: The PAXCESS trimmer functions as both a string trimmer for general grass cutting and an edger for neat lawn borders.

• Sweeping: Hold the trimmer at a slight angle and swing it from side to side, cutting small amounts of grass with each pass.
• Edging: Rotate the trimmer head 90 degrees (if applicable to your model) and use the edging wheel (if included) to guide the trimmer along sidewalks or driveways for a clean edge.
• Around Obstacles: Use caution when trimming around trees, fences, or other obstacles. The protecting ring helps prevent damage to plants and the trimmer line.

Figure 5: The protecting ring around the trimmer head helps shield delicate plants and prevents the cutting line from striking hard surfaces.

Maintenance

Regular maintenance ensures optimal performance and extends the life of your trimmer.

1. Cleaning

• Always remove the battery pack before cleaning.
• Wipe the exterior of the trimmer with a damp cloth. Do not use strong detergents or solvents.
• Clean the air vents to prevent overheating.

2. Replacing the Trimmer Line

• Disconnect the battery pack.
• Refer to the specific instructions for your auto-feed head to open the spool housing.
• Remove the old spool and insert a new pre-wound spool of the correct line diameter.
• Ensure the line is properly threaded through the eyelets before closing the housing.

3. Battery Care and Storage

• Store batteries in a cool, dry place away from direct sunlight and extreme temperatures.
• For long-term storage, charge batteries to approximately 50% capacity.
• Do not store batteries in a discharged state.

Troubleshooting

This section addresses common issues you might encounter with your string trimmer.

Specifications

Technical details for the PAXCESS SF8A220 Cordless String Trimmer.

• Model: SF8A220
• Brand: PAXCESS
• Power Source: Battery Powered
• Battery Type: 20V Lithium-Ion
• Cutting Width: 12 inches
• Adjustable Length: 36.6 to 44.5 inches
• Item Weight: 2.72 kg (approximately 6 lbs)
• Product Dimensions: 60.96 x 12.7 x 12.7 cm (approx. 24 x 5 x 5 inches)
• Assembly Required: Yes

Warranty and Support

PAXCESS products are manufactured to high-quality standards. For specific warranty details, please refer to the warranty card included with your purchase or visit the official PAXCESS website.

Customer Support:

If you have any questions, require technical assistance, or need to order replacement parts, please contact PAXCESS customer service. Contact information can typically be found on the product packaging or the official brand website.

Please retain your proof of purchase for warranty claims.