Redragon K598 TKL Wireless Mechanical Keyboard User Manual

1. Introduction

This manual provides detailed instructions for the Redragon K598 TKL Wireless Mechanical Keyboard. Please read this guide thoroughly to ensure proper setup, operation, and maintenance of your device. The K598 is a compact 87-key tenkeyless keyboard designed for gaming and general use, featuring RGB backlighting and Outemu Brown mechanical switches.

2. Package Contents

Verify that all items are present in your package:

• Redragon K598 TKL Wireless Mechanical Keyboard
• USB Cable (for charging and wired connection)
• User Manual (this document)

3. Setup and Connectivity

3.1 Charging the Keyboard

Before initial use, fully charge the keyboard. Connect the provided USB cable to the keyboard's USB port and to a powered USB port on your computer or a USB wall adapter. The keyboard features a built-in Lithium Polymer battery. A full charge provides approximately 60 hours of use with LEDs off, or 30 hours with LEDs on.

3.2 Wireless Connection (2.4GHz)

1. Locate the wireless USB receiver, typically stored in a compartment on the keyboard.
2. Plug the USB receiver into an available USB port on your computer.
3. Ensure the power switch on the keyboard is set to the "ON" position.
4. The keyboard should automatically connect to your computer.

3.3 Wired Connection

To use the keyboard in wired mode, simply connect the USB cable from the keyboard to your computer. The keyboard will function as a wired device and charge simultaneously. This also allows for seamless switching between wired and wireless modes.

4. Operating Instructions

4.1 Basic Keyboard Functions

The Redragon K598 is a standard 87-key layout. All keys function as labeled. For specific multimedia or function key combinations, refer to the keycap legends, often used in conjunction with the FN key.

4.2 RGB Backlighting Control

The keyboard features user-programmable RGB backlighting with 18 distinct lighting modes. You can customize colors, brightness, and animation speed.

• To cycle through lighting modes: Press FN + END.
• To change single colors (8 options): Press FN + INS.
• To adjust brightness (6 levels): Use dedicated brightness control keys or FN + Arrow Up/Down (if available, otherwise implied by "6 brightness levels").
• To adjust breathing speed: Use dedicated speed control keys or FN + Arrow Left/Right (if available, otherwise implied by "adjustable breathing speed").

4.3 Key Switch Characteristics

The K598 keyboard is equipped with Outemu Brown mechanical switches. These switches are characterized by a tactile bump, medium resistance, and quiet travel, providing precise tactile feedback suitable for both typing and gaming.

• Actuation Force: 45gf +/- 10gf
• Keystroke Travel: 2.2mm +/- 0.6mm
• Durability: Ultra-durable keys tested to 50 million keystrokes.

4.4 Keyboard Construction and Keycaps

The K598 features a solid ABS construction with plate-mounted mechanical keys, designed for durability under demanding use. The keycaps are precision-engineered to provide crystal clear uniform backlighting and are resistant to wear, ensuring legends do not scratch off over time.

4.5 Tenkeyless Design

The compact 87-key tenkeyless (TKL) design of the K598 saves desk space without compromising performance. This layout is preferred by many gamers for its ergonomic benefits and reduced footprint, allowing more room for mouse movement.

5. Maintenance

5.1 Cleaning the Keyboard

To maintain optimal performance and appearance, regularly clean your keyboard. Use a soft, lint-free cloth slightly dampened with water or a mild cleaning solution. Avoid harsh chemicals, abrasive materials, or excessive moisture. For cleaning between keycaps, use compressed air or a small brush.

5.2 Storage

When not in use for extended periods, store the keyboard in a dry, cool environment away from direct sunlight and extreme temperatures. Ensure the keyboard is powered off to conserve battery life.

6. Troubleshooting

If you encounter issues with your Redragon K598 keyboard, refer to the following common problems and solutions:

1. Keyboard not responding (Wireless Mode):
   • Ensure the keyboard's power switch is ON.
   • Verify the USB receiver is securely plugged into a working USB port on your computer.
   • Check the keyboard's battery level. Connect the USB cable to charge if the battery is low.
   • Try plugging the USB receiver into a different USB port.
   • Restart your computer.
2. Keyboard not responding (Wired Mode):
   • Ensure the USB cable is securely connected to both the keyboard and your computer.
   • Try using a different USB port on your computer.
   • Test with a different USB cable if available.
   • Restart your computer.
3. RGB Backlighting not working or incorrect:
   • Ensure the keyboard is powered on and charged.
   • Cycle through lighting modes using FN + END.
   • Adjust brightness levels.
   • If using wireless mode, low battery can affect LED performance. Charge the keyboard.
4. Keys repeating or not registering:
   • Clean the affected key switch area with compressed air to remove debris.
   • Ensure the keycap is properly seated.
   • If the issue persists, it may indicate a hardware fault.
5. Software installation issues:
   • Ensure you download the correct software version for your specific keyboard model from the official Redragon website.
   • Temporarily disable antivirus or firewall software during installation if it interferes.
   • Run the installer as an administrator.

7. Specifications

8. Warranty and Support

8.1 Warranty Information

Specific warranty details for the Redragon K598 TKL Wireless Mechanical Keyboard are typically provided with the product packaging or available on the official Redragon website. Please retain your proof of purchase for warranty claims.

8.2 Customer Support

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact Redragon customer support. Visit the official Redragon website for contact information and additional resources.

Official Redragon Website: www.redragonusa.com