1. Introduction
This manual provides instructions for the assembly, installation, operation, and maintenance of your vidaXL Floating Wall Shelf, Model 323817. Please read these instructions carefully before installation and retain them for future reference.
2. Safety Information
- Ensure the wall is suitable for mounting and can support the shelf's weight plus the maximum load capacity.
- Always use appropriate wall anchors for your specific wall type (e.g., drywall, concrete, brick). Wall anchors are not always included and may need to be purchased separately.
- Do not exceed the maximum weight capacity of 22 pounds (10 kg). Overloading can cause the shelf to detach from the wall, resulting in injury or damage.
- Keep small parts and packaging materials away from children to prevent choking hazards.
- Use a spirit level to ensure the mounting bracket is perfectly horizontal before securing it to the wall. An uneven bracket can lead to instability.
3. Package Contents
Verify that all components are present before beginning assembly:
- 1x Floating Wall Shelf (White, 90 x 23.5 x 3.8 cm)
- 1x Metal Mounting Rod/Bracket
- Assembly Hardware (screws for mounting bracket to wall, screws for securing shelf to bracket)
4. Setup and Installation
Tools Required (Not Included):
- Pencil
- Measuring Tape
- Spirit Level
- Drill and appropriate drill bits
- Screwdriver (Phillips head recommended)
Installation Steps:
- Choose Location: Select a suitable wall location. Ensure there are no hidden electrical wires or water pipes behind the drilling points.
- Mark Drilling Points: Hold the metal mounting rod (Image of Mounting Bracket) against the wall at the desired height. Use a spirit level to ensure it is perfectly horizontal. Mark the positions for the drill holes with a pencil.
- Drill Holes: Drill holes at the marked positions. The size of the drill bit should match the wall plugs provided or the ones you intend to use for your wall type. Insert wall plugs if necessary.
- Attach Mounting Rod: Secure the metal mounting rod to the wall using the provided screws. Ensure it is firmly attached and level.
Image: The metal mounting bracket, which attaches directly to the wall.
- Slide Shelf onto Rod: Carefully align the hollow channels on the back of the floating shelf with the protruding arms of the mounted rod. Slide the shelf firmly onto the rod until it is flush with the wall.
Image: The floating shelf being slid onto the metal mounting bracket.
- Secure Shelf: Once the shelf is fully seated, locate the small screw holes on the underside or top of the shelf that align with the mounting rod. Use the smaller screws provided to secure the shelf to the rod, preventing it from accidentally sliding off.
Image: Rear view of the floating shelf showing the integrated mounting bracket.
- Final Check: Gently test the stability of the installed shelf before placing any items on it.
5. Operation (Usage)
Your vidaXL Floating Wall Shelf is designed for displaying decorative items, books, collectibles, and other lightweight objects. Place items evenly across the shelf surface to distribute weight. Do not concentrate heavy items in one spot.
Image: The vidaXL Floating Wall Shelf installed in a living space, showcasing its use for decorative items.
6. Maintenance
To maintain the appearance and longevity of your floating wall shelf:
- Wipe the surface with a dry, soft cloth to remove dust.
- For stubborn marks, use a slightly damp cloth with mild soap, then dry immediately with a clean, soft cloth.
- Avoid using abrasive cleaners, harsh chemicals, or rough sponges, as these can damage the finish.
- Periodically check the mounting screws to ensure they remain tight and secure.
7. Troubleshooting
- Shelf appears unstable or tilts:
Solution: Re-check that the mounting rod is perfectly level and securely fastened to the wall. Ensure the shelf is fully slid onto the rod and secured with the small screws. Verify that the total weight on the shelf does not exceed 22 pounds (10 kg). - Difficulty sliding shelf onto bracket:
Solution: Ensure the mounting rod is installed straight and not bent. Check for any obstructions within the shelf's internal channels. Apply gentle, even pressure when sliding the shelf. Do not force it. - Wall damage during installation:
Solution: This often occurs due to incorrect drill bit size, improper wall anchors, or excessive force. Always use the correct tools and anchors for your wall type and follow drilling instructions carefully.
8. Specifications
| Attribute | Value |
|---|---|
| Brand | vidaXL |
| Model Name | Floating Wall Shelves Bookcase Storage Rack Display Hanging Shelf MDF vidaXL |
| Item Model Number | 323817 |
| Product Dimensions (D x W x H) | 9.25" x 35.43" x 1.5" (23.5 cm x 90 cm x 3.8 cm) |
| Color | White |
| Material | Engineered Wood (Honeycomb MDF), Metal |
| Weight Limit | 22 Pounds (10 kg) |
| Assembly Required | Yes |
| Mounting Type | Wall Mount |
| Product Care Instructions | Wipe with Dry Cloth |
Image: Dimensional diagram of the vidaXL Floating Wall Shelf.
Image: Close-up of the shelf material, highlighting the white finish and edge.
9. Warranty
Specific warranty information for this product is not provided in the available data. For details regarding warranty coverage, terms, and conditions, please contact vidaXL directly or refer to the documentation included with your purchase.
10. Support
For further assistance, product inquiries, or to report any issues, please contact vidaXL customer support. You may find contact information on the official vidaXL website or through the retailer where the product was purchased.
Visit the vidaXL Store: vidaXL Amazon Store
