Introduction
Thank you for choosing the HammerHead Showers Solid Metal 27.5 Inch Shower Slide Bar. This product is designed for durability and ease of use, allowing you to adjust the height and angle of your handheld shower head without modifying your plumbing. Constructed from solid metal with commercial-grade finishes, it is built to last and resist flaking or rust.
Image: The HammerHead Showers Solid Metal 27.5 Inch Shower Slide Bar in Chrome, highlighting its solid metal construction and lifetime backing.
Components
The package includes the following components:
- Slide Bar
- Mounting Hardware
Note: A power drill and a 3/16" tile drill bit are required for installation. The drop elbow is not included.
Setup and Installation
Installation of the HammerHead Showers Slide Bar is designed for DIY enthusiasts. Ensure you have the necessary tools, including a power drill and a 3/16" tile drill bit. For detailed visual instructions, please refer to the official product demonstration video below.
Video: A demonstration of the HammerHead Showers All Metal Shower Slide Bar, showcasing its features and installation process.
Image: The 27.5-inch length of the HammerHead Showers Slide Bar, illustrating its wide range of adjustment for varying user heights.
Operating Instructions
The slide bar allows for easy adjustment of your handheld shower head's height and angle. To adjust the height, simply loosen the knob on the shower holder, slide the holder to your desired position, and then tighten the knob to secure it. To adjust the angle, rotate the shower head within the holder to achieve your preferred spray direction.
Image: Three examples of the shower head positioned at low, middle, and high points on the slide bar, demonstrating adjustable height.
Image: A close-up of the shower head on the slide bar, with arrows indicating the ability to adjust the spray angle.
This universal shower holder bracket is designed to fit a wide range of handheld shower heads and hoses from various brands.
Image: The universal shower holder on the slide bar, shown with different handheld shower heads to illustrate compatibility.
Maintenance
To maintain the finish and functionality of your HammerHead Showers Slide Bar, regularly clean it with a soft cloth and mild soap. Avoid abrasive cleaners, scouring pads, or harsh chemicals, as these can damage the finish. Ensure the adjustment knob is not overtightened to prevent wear on the internal components.
Troubleshooting
Shower Head Does Not Fit Slide Bar Holder
If your shower head does not seat properly in the holder, it may be due to the tapered design of the holder. The holder can be rotated 180 degrees to accommodate different shower head shapes. Loosen the Philips head screw inside the holder, rotate the holder, and then re-tighten the screw.
Video: Instructions on how to adjust the shower head holder if your shower head does not fit correctly, by rotating the tapered holder.
Slide Bar Holder Won't Angle Down
If the shower holder is too tight to adjust its angle, locate the Philips head screw inside the holder. Loosen this screw slightly to allow for angle adjustment, then re-tighten it to secure the desired angle without stripping the screw.
Video: Guidance on how to adjust the angle of the shower holder on the slide bar, by loosening and re-tightening an internal screw.
Specifications
| Model Number | SLIDE-BAR-CH |
| Color | Chrome |
| Material | Metal (Brass) |
| Item Depth | 25.6 inches |
| Mounting Type | Wall Mount |
| Installation Method | Wall-Mounted |
| Item Weight | 0.02 Kilograms (0.634 ounces) |
| UPC | 619988970931, 850035234464 |
Warranty and Support
HammerHead Showers products are built to last a lifetime and are backed by our commitment to quality. We stand behind our products with a lifetime warranty. Our expertly trained customer support team is available to assist you with any questions regarding specifications, installation, or warranty claims. You can contact us through the official HammerHead Showers website or your retailer's customer service channels.