1. Introduction
This manual provides essential information for the safe installation, operation, and maintenance of your Essebagno Essekaska Thermostatic Hydromassage Shower Panel, Model 9011716. Please read these instructions carefully before installation and retain them for future reference.
Image 1.1: The Essebagno Essekaska black thermostatic hydromassage shower panel installed in a modern bathroom setting.
2. Safety Information
- Installation must be performed by a qualified professional in accordance with local plumbing and electrical codes.
- Ensure the water supply is turned off before beginning any installation or maintenance work.
- This shower panel is designed to operate only with electric storage water heaters (cumulus type). Do not connect to other water heating systems.
- Do not use abrasive cleaners or solvents on the panel's surface, as this may damage the finish.
- Regularly check for leaks and signs of wear. Address any issues promptly to prevent damage.
3. Package Contents
Verify that all components are present and undamaged before installation:
- Essebagno Essekaska Thermostatic Hydromassage Shower Panel
- Hand Shower with Hose
- Mounting Hardware (screws, anchors, gaskets)
- Installation Manual (this document)
4. Setup and Installation
4.1 Pre-Installation
- Ensure adequate water pressure and temperature from your electric storage water heater.
- Confirm the wall structure can support the weight of the shower panel.
- Gather necessary tools: drill, level, measuring tape, wrench, screwdriver.
4.2 Mounting the Panel
- Mark the desired mounting height on the wall, considering the panel's dimensions (165 cm height).
- Drill holes for the mounting brackets according to the provided template (if applicable) or panel design.
- Secure the mounting brackets to the wall using appropriate screws and anchors.
- Carefully hang the shower panel onto the secured brackets.
4.3 Water Connections
- Connect the hot and cold water supply lines to the corresponding inlets on the back of the shower panel. Ensure proper sealing with gaskets.
- Turn on the main water supply and check for leaks.
4.4 Electrical Connection (for LED Display)
The LED temperature display requires an electrical connection. Consult a qualified electrician for safe wiring according to local regulations.
Image 4.1: Dimensions of the Essebagno Essekaska shower panel.
5. Operating Instructions
5.1 Water Flow and Temperature Control
- Main Control Knob: Rotate the main knob to turn the water flow on or off and adjust the volume.
- Thermostatic Control: The panel features a thermostatic mixer. Set your desired water temperature using the dedicated temperature control knob. The LED display will show the current water temperature.
Image 5.1: Close-up of the thermostatic control knob with temperature indicators.
5.2 Jet Selection
The panel offers 4 types of jets. Use the diverter knob(s) to select your preferred water outlet:
- Rain Shower Head: Provides a wide, gentle rain-like spray from the top.
- Waterfall Shower Head: Delivers a broad, cascading sheet of water from the top.
- Hand Shower: A flexible hose with a handheld spray for targeted rinsing.
- Body Jets: Multiple small jets integrated into the panel for a hydromassage experience.
6. Maintenance
6.1 Cleaning
- Clean the panel regularly with a soft cloth and mild soap or a non-abrasive bathroom cleaner.
- Rinse thoroughly with clean water and dry with a soft cloth to prevent water spots.
- Do not use abrasive sponges, harsh chemicals, or solvents, as these can damage the matte black finish.
6.2 Descaling
In areas with hard water, limescale buildup may occur. Use a descaling solution specifically designed for shower fixtures, following the product's instructions. Regularly clean the nozzles of the shower heads and body jets to ensure optimal performance.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No water flow or low pressure. | Main water supply off; clogged filters; low household water pressure. | Check main water supply; clean inlet filters; consult a plumber for household pressure issues. |
| Water temperature is inconsistent or incorrect. | Thermostatic cartridge issue; insufficient hot water supply from heater. | Ensure your electric storage water heater is functioning correctly; contact a qualified plumber if the issue persists. |
| LED display not working. | No electrical connection; power outage. | Check electrical connections; ensure power supply to the panel. |
| Leaks from connections. | Loose connections; damaged gaskets. | Tighten connections; replace damaged gaskets. Turn off water supply before attempting repairs. |
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | 9011716 |
| Brand | ESSEBAGNO |
| Style | Modern |
| Finish Type | Matte |
| Product Dimensions (D x W x H) | 8.5 cm x 19 cm x 165 cm |
| Material | Aluminum |
| Color | Black |
| Water Heater Compatibility | Electric storage water heater (cumulus type) only |
| Jet Functions | Rain shower, Waterfall, Hand shower, Body jets |
| Temperature Display | LED screen |
| Country of Origin | France |
9. Warranty Information
The Essebagno Essekaska Thermostatic Hydromassage Shower Panel comes with a 5-year warranty from the date of purchase. This warranty covers manufacturing defects under normal use and service. It does not cover damage resulting from improper installation, misuse, abuse, accident, or unauthorized repairs. Please retain your proof of purchase for warranty claims.
10. Customer Support
For technical assistance, spare parts, or warranty claims, please contact your retailer or the manufacturer, Essebagno. Refer to your purchase documentation for specific contact details.
Manufacturer: Essebagno
Model: 9011716