VAULTEK LifePod 20 Colion Noir Edition Biometric Portable Safe User Manual

Introduction

This manual provides essential information for the safe and effective operation of your VAULTEK LifePod 20 Colion Noir Edition Biometric portable safe. Please read these instructions thoroughly before use to ensure proper functionality and security. Keep this manual for future reference.

What's Included

Your VAULTEK LifePod 20 package includes the following items:

• LifePod 20 Colion Noir Edition Biometric Portable Safe
• (2) Manual Keys
• 48" Steel Security Cable
• Lid Organizer
• Pluck Foam
• Removable Interior Tray
• Hook and Loop Straps
• High-Density Foam Padding
• Carry Handle

Image: All items included with the VAULTEK LifePod 20, laid out for clear viewing.

Setup

1. Battery Installation

The LifePod 20 operates on a 9V alkaline battery (not included), which can last approximately one year. The safe can also function without power as a weather-resistant case. For backup power in case of a dead battery, a concealed micro-USB port is located beneath the front cover.

1. Locate the battery compartment, typically on the underside or inside the lid.
2. Insert a fresh 9V alkaline battery, ensuring correct polarity.
3. Close the battery compartment securely.

2. Setting the Master Code

The Smart Sense LED keypad allows for a 4 to 8 digit master code. It is recommended to change the default code immediately after battery installation.

1. With the safe open, press and hold the 'Program' button (refer to your quick start guide for exact location).
2. Enter your desired 4 to 8 digit master code using the numbered buttons.
3. Press the 'Program' button again to confirm. The safe will emit a confirmation tone.

3. Fingerprint Enrollment

The water-resistant biometric scanner can store up to 20 unique fingerprints for quick access.

1. With the safe open, press and hold the 'Program' button until the biometric scanner light activates.
2. Place your finger on the scanner. Lift and repeat several times from different angles until the safe confirms enrollment with a tone.
3. Repeat for additional fingerprints, up to 20.

Image: Detail of the biometric scanner and keypad for access control.

Operating Instructions

1. Opening the LifePod

The LifePod 20 offers multiple entry methods:

• Biometric Scan: Place an enrolled finger on the biometric scanner.
• Keypad Code: Enter your 4-8 digit master code on the Smart Sense LED keypad.
• Manual Keys: Insert one of the provided manual keys into the keyhole and turn.

2. Locking the LifePod

To secure your LifePod 20, simply close the lid and engage the dual compression latches. The unique built-in lock system with VAULTEK’s precision-engineered anti-impact latch will automatically secure the contents.

3. Using the Anti-Theft Security Cable

For enhanced security, utilize the included steel security cable to tether your LifePod 20 to a fixed object.

1. Locate the security cable attachment point on the safe.
2. Thread the steel security cable through the attachment point and around a secure, immovable object (e.g., car seat frame, desk leg).
3. Secure the cable ends as instructed in the quick start guide.

Image: Demonstrating how to open the LifePod 20 using the keypad.

Key Features

• Signature Colion Noir Edition: This special edition features unique #thepewpewlife branding, combining distinctive design with proven security.
• Biometric and Multi-Entry Access: Access your safe using the water-resistant biometric scanner (stores up to 20 fingerprints), the Smart Sense LED keypad with a 4 to 8 digit master code, or the included manual keys.
• Built-in Lock and Anti-Theft Protection: Features VAULTEK’s precision-engineered anti-impact latch and an optional anti-picking mechanism. A steel security cable is included for tethering the safe to a fixed object, providing secure storage at home, in a vehicle, or during travel. The safe meets TSA guidelines for handgun cases.
• Spacious Dual-Layer Storage: Designed to fit a full-size handgun up to 9.25 inches long. A removable interior tray provides a second storage layer with slots for organizing everyday carry (EDC) gear. The lid organizer offers additional storage, and a built-in AirTag pocket allows for on-the-go tracking (AirTag not included).
• Rugged Polymer Construction: Constructed from advanced lightweight polymer, engineered for superior strength, impact resistance, and drop-tested durability, making it suitable for travel and tough environments.
• Weather Resistant Safe: Airtight, dustproof, and designed to float. Dual compression latches and a rubber gasket seal protect contents from water and debris, ensuring reliability for outdoor use while remaining TSA compliant.
• Battery or Manual Power: Operates on a 9V alkaline battery (lasts up to one year). The LifePod can also function as a weather-resistant case without battery power. A concealed micro-USB port provides backup power if the battery dies.
• Responsive LED Lighting: Provides instant system feedback with low battery and tamper alerts on the control panel. An interior LED light ensures clear visibility of your safe’s contents in low-light conditions.

Image: The spacious interior of the LifePod 20 with dual-layer storage and lid organizer.

Image: The LifePod 20 demonstrating its weather-resistant properties in water.

Maintenance

Regular maintenance ensures the longevity and reliable performance of your LifePod 20.

• Cleaning: Wipe the exterior with a soft, damp cloth. Avoid abrasive cleaners or solvents. Ensure the biometric scanner and keypad are clean for optimal performance.
• Battery Replacement: Replace the 9V alkaline battery annually or when the low battery alert is indicated.
• Gasket Inspection: Periodically inspect the rubber gasket seal around the lid for any signs of wear or damage to maintain its weatherproof integrity.

Troubleshooting

If you encounter issues with your LifePod 20, refer to the following common solutions:

• Safe Not Opening:
  • Ensure the battery is not depleted. Use the micro-USB backup power port if necessary.
  • Verify the master code is entered correctly.
  • Ensure your finger is properly placed on the biometric scanner and is clean.
  • Use the manual keys as an alternative access method.
• Keypad Not Responding:
  • Check battery level.
  • Clean the keypad surface.
• Biometric Scanner Issues:
  • Ensure your finger and the scanner surface are clean and dry.
  • Try re-enrolling your fingerprint if issues persist.
• Lid Sticks When Opening: LifePod's airtight seal can create pressure. Release pressure by opening the front keyhole cover when the lid sticks closed.

For further assistance, please contact VAULTEK customer support.

Specifications

Warranty and Support

Your VAULTEK LifePod 20 is covered by a manufacturer's warranty against defects in materials and workmanship. For specific warranty details, registration, or technical support, please visit the official VAULTEK website or contact their customer service department directly.

VAULTEK Official Website: www.vaulteksafe.com