1. Introduction
The OSRAM LEDriving SL W5W LED Retrofit Lamps provide a modern and intense LED light, offering an easy plug-and-play solution to replace conventional W5W lamps in various vehicle applications. These lamps feature a cool white light with a color temperature of up to 6,000 Kelvin, providing quicker light-up times compared to standard lamps, which can enhance reaction time for drivers behind you. This manual provides essential information for the proper installation, operation, and maintenance of your OSRAM LEDriving SL lamps.
2. Important Safety Information
Please read carefully before installation and use.
These products do not have ECE approval. This means they must not be used on public roads in any exterior application. Use on public roads leads to cancellation of operating license and loss of insurance coverage. Several countries do not allow sale and use of these products. Please contact your local distributor for information on the availability in your country.
In some cases, an additional load resistor may be needed for proper function.
3. Product Overview
The OSRAM LEDriving SL W5W lamps are designed for off-road use, providing superior illumination and efficiency. They are an ideal replacement for traditional W5W bulbs, offering enhanced visibility and a modern aesthetic.
- Ideal replacement for any vehicle's W5W lamps.
- Available in Cool White for various vehicle exterior applications.
- Easy upgrade to LED technology with plug & play solutions.
- Provides quicker light-up for improved signaling.
Figure 3.1: OSRAM LEDriving SL W5W LED Retrofit Lamps packaging.
Figure 3.2: Performance comparison of LEDriving SL vs. Non-LED bulbs.
Figure 3.3: Illuminated OSRAM LEDriving SL W5W LED bulb.
4. What's in the Box
Your OSRAM LEDriving SL W5W LED Retrofit Lamps package includes:
- 2 x OSRAM LEDriving SL W5W LED Lamps
5. Setup and Installation
The OSRAM LEDriving SL W5W lamps are designed for easy plug-and-play installation. Always ensure the vehicle's ignition is off and the battery is disconnected before attempting any electrical work.
- Identify Bulb Location: Locate the existing W5W bulb in your vehicle's light assembly (e.g., position light, indicator light, number plate light).
- Access Bulb: Depending on your vehicle model, you may need to remove a cover, trim, or even a headlight assembly to access the bulb socket. Refer to your vehicle's owner's manual for specific instructions.
- Remove Old Bulb: Carefully twist or pull the existing W5W bulb from its socket. Be gentle to avoid damaging the socket or wiring.
- Insert New LED Lamp: Insert the OSRAM LEDriving SL W5W LED lamp into the socket. Ensure it is seated firmly.
- Test Functionality: Reconnect the battery and turn on the vehicle's lights to test the new LED lamps. If they do not light up, try rotating the bulb 180 degrees in the socket, as LEDs are polarity sensitive.
- Secure Assembly: Once confirmed working, reassemble any covers or components removed during installation.
Note: As mentioned in the safety information, these lamps are for off-road use only. In some cases, an additional load resistor may be required to prevent hyper-flashing or error messages in vehicles with CAN bus systems. This is not included and must be purchased separately if needed.
Figure 5.1: Dimensions of the OSRAM LEDriving SL W5W LED bulb.
Figure 5.2: Two OSRAM LEDriving SL W5W LED bulbs.
6. Operating Instructions
Once installed, the OSRAM LEDriving SL W5W lamps operate automatically with your vehicle's lighting system. They are designed to provide instant, bright illumination when activated.
- Position Light: When your vehicle's parking or position lights are activated, the LEDriving SL lamps will illuminate, providing a clear and modern white light.
- Indicator Light (Side): If used as side indicator lights (where permitted for off-road use), they will flash in conjunction with your turn signals.
- Number Plate Light: When your vehicle's rear lights are on, the LEDriving SL lamps will illuminate your number plate with bright, uniform light.
Figure 6.1: OSRAM LEDriving SL W5W LED bulbs in various light outputs (product is Cool White).
7. Maintenance
OSRAM LEDriving SL W5W lamps are designed for long-lasting performance and require minimal maintenance. Due to their LED technology, they have a significantly longer lifespan compared to conventional halogen bulbs.
- Cleaning: If the outer lens of your vehicle's light assembly becomes dirty, clean it with a soft, damp cloth. Avoid abrasive cleaners.
- Inspection: Periodically check the lamps for proper function. If a lamp fails, refer to the Troubleshooting section.
- Replacement: While designed for longevity, if a lamp needs replacement, follow the installation steps in Section 5.
8. Troubleshooting
If you encounter issues with your OSRAM LEDriving SL W5W lamps, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not light up. | Incorrect polarity (LEDs are polarity sensitive). Loose connection. Blown fuse. Faulty lamp. |
Remove the lamp, rotate it 180 degrees, and reinsert. Ensure the lamp is firmly seated in the socket. Check and replace any blown fuses in your vehicle's lighting circuit. If other solutions fail, the lamp may be faulty and require replacement. |
| Lamp flickers or hyper-flashes. | CAN bus system incompatibility (vehicle detects lower power draw). | Install an appropriate load resistor (not included) in parallel with the LED lamp to simulate the power draw of a conventional bulb. |
| Error message on dashboard. | CAN bus system incompatibility (vehicle detects lower power draw). | Install an appropriate load resistor (not included) to resolve the error message. |
9. Specifications
| Attribute | Value |
|---|---|
| Brand | OSRAM |
| Model | LEDriving® SL, W5W, White |
| Item Model Number | 2825DWP-02B |
| Specific Uses For Product | Projector Light (Off-road use only) |
| Brightness | 70 Lumens |
| Color Temperature | 6000K (Cool White) |
| Voltage | 12 Volts |
| Mirror Lighting Type | W5W |
| Item Package Quantity | 1 (contains 2 lamps) |
| Item Weight | 0.388 ounces |
| Product Dimensions | 1.06 x 0.39 x 0.39 inches |
| Manufacturer | OSRAM |
| Date First Available | December 3, 2020 |
10. Warranty and Support
OSRAM offers a 4-year guarantee for these LEDriving® SL lamps, starting from the date of purchase. This guarantee covers defects in material and workmanship under normal use conditions.
For warranty claims or technical support, please contact your local OSRAM distributor or visit the official OSRAM website. Please retain your proof of purchase for warranty validation.
For more information, you can visit the OSRAM Store on Amazon.
