DEWENWILS 3 FT Automatic GFCI Extension Cord Outdoor

1. Introduction and Overview

This manual provides essential information for the safe and effective use of your DEWENWILS 3 FT Automatic GFCI Extension Cord. This heavy-duty, UL Listed extension cord is designed to provide reliable power with enhanced safety features for both indoor and outdoor applications. It features a 12/3 gauge wire, a 15A/125V/1875W rating, and an integrated Ground Fault Circuit Interrupter (GFCI) for electrical shock protection.

2. Safety Information

Always prioritize electrical safety. This GFCI extension cord is equipped to protect against electrical shock by detecting ground faults and quickly interrupting the power supply. Adhere to the following safety guidelines:

• GFCI Protection: The integrated GFCI provides crucial protection against electrical shock, especially when operating appliances near water or in damp conditions.
• Outdoor/Indoor Use: The cord is suitable for both indoor and outdoor use. Ensure all connections are secure and protected from direct water immersion.
• Overload Prevention: Do not exceed the cord's maximum electrical rating of 15A / 125V / 1875W. Overloading can lead to overheating and fire hazards.
• Inspection: Before each use, inspect the cord for any signs of damage, including cuts, fraying, or exposed wires. Do not use a damaged cord.
• Proper Grounding: Always plug the extension cord into a properly grounded 3-prong outlet.
• Keep Dry: While designed for outdoor use, avoid submerging the cord or its connections in water.

3. Features

• Heavy-Duty 12/3 Gauge Wire: Constructed with premium SJTW 12/3 gauge wire, offering durability and capacity for demanding applications.
• Automatic GFCI Protection: Features an attached GFCI that automatically resets when plugged in or when power is restored after an interruption, providing continuous safety.
• 3-Outlet Pigtail: A multi-plug triple tap allows for simultaneous connection of up to three appliances.
• LED Lighted 3-Prong Plug: An LED indicator on the plug illuminates when the cord is powered, confirming active power supply and aiding visibility in the dark.
• Weather-Resistant Jacket: The durable PVC jacket is designed to resist abrasion, moisture, and direct sunlight, suitable for temperatures from -40°F to 140°F.
• UL Listed: Certified to UL standards for safety and quality assurance.

This image displays the DEWENWILS 3 FT Automatic GFCI Extension Cord, featuring its main plug, the integrated GFCI module, and the triple tap outlet. The cord is black and designed for heavy-duty use.

A detailed view of the GFCI (Ground Fault Circuit Interrupter) module, showing the 'TEST' and 'RESET' buttons. This module provides critical electrical shock protection.

The transparent triple tap outlet is shown with its internal LED indicator glowing, signifying that the cord is receiving power. This feature helps confirm power availability, especially in low-light conditions.

The heavy-duty extension cord is depicted traversing grass, rocks, and soil, emphasizing its durable, weather-resistant jacket designed to withstand moisture, abrasion, and direct sunlight for outdoor use.

A collage showcasing the versatility of the extension cord, with examples of its use for power tools, hot tubs, outdoor string lights, and pool pumps, highlighting its suitability for both indoor and outdoor applications.

4. Setup and Installation

1. Connect to Power Source: Plug the 3-prong male end of the GFCI extension cord into a standard 125V AC grounded wall outlet.
2. Verify Power: The LED indicator on the 3-prong plug and within the triple tap outlet should illuminate, indicating that the cord is receiving power.
3. Test GFCI: Before connecting any appliances, press the 'TEST' button on the GFCI module. The LED indicator should turn off, and power to the outlets should cease.
4. Reset GFCI: Press the 'RESET' button on the GFCI module. The LED indicator should re-illuminate, and power should be restored to the outlets. If the GFCI does not reset or immediately trips again, do not use the cord and refer to the Troubleshooting section.
5. Connect Appliances: Once the GFCI is confirmed to be functioning correctly, plug your appliances into the triple tap outlets. Ensure that the total wattage of all connected appliances does not exceed 1875W.

5. Operating Instructions

The DEWENWILS GFCI Extension Cord operates automatically once properly set up. The GFCI continuously monitors for ground faults and will trip to cut off power if a fault is detected, protecting users from electrical shock. The LED indicator provides a visual confirmation of power status.

• Power Indication: The lighted plug and outlet provide immediate visual feedback that the cord is active and ready for use.
• Automatic Reset: In case of a power interruption, the GFCI is designed to automatically reset once power is restored, eliminating the need for manual intervention unless a fault is present.
• Multiple Connections: Utilize the three outlets to power multiple devices, ensuring the combined load does not exceed the cord's maximum rating.

6. Maintenance

Regular maintenance ensures the longevity and safe operation of your extension cord:

• Cleaning: Disconnect the cord from the power source before cleaning. Wipe the cord and GFCI module with a dry cloth. Do not use liquid cleaners or immerse in water.
• Storage: When not in use, store the cord in a dry, cool place, away from direct sunlight and extreme temperatures. Coil the cord loosely to prevent kinks and damage.
• Periodic Inspection: Routinely check the cord, plug, GFCI module, and outlets for any signs of wear, damage, or corrosion.
• GFCI Testing: Test the GFCI monthly to ensure it is functioning correctly (refer to Section 4: Setup and Installation).

7. Troubleshooting

If you encounter issues with your DEWENWILS GFCI Extension Cord, refer to the following:

• GFCI Trips Frequently:
  • This indicates a ground fault or an overload. Disconnect all appliances and try to reset the GFCI.
  • If it resets, plug in appliances one by one to identify the faulty device.
  • If it trips without any appliances connected, the cord itself may be damaged or there is an issue with the wall outlet.
  • Ensure the total wattage of connected devices does not exceed 1875W.
• No Power to Outlets (LEDs Off):
  • Check if the wall outlet is functioning by plugging in another device.
  • Ensure the GFCI is reset (press the 'RESET' button).
  • Verify the main power supply to the wall outlet (e.g., check circuit breaker).
• Physical Damage: If the cord or any component is visibly damaged, discontinue use immediately and replace the product.

8. Specifications

9. Warranty and Support

For warranty information or technical support, please contact DEWENWILS customer service. Details can typically be found on the product packaging or the official DEWENWILS website. Please retain your proof of purchase for warranty claims.