Introduction
This manual provides detailed instructions for the safe and effective use of your Feit Electric WORK6000XLTPPLUG 60W Portable LED Work Light. Please read all instructions carefully before assembly, operation, or maintenance to ensure proper function and safety.
Important Safety Instructions
Observe the following safety precautions to reduce the risk of fire, electric shock, or injury.
- Always disconnect the power supply before attempting any installation, maintenance, or cleaning.
- Ensure the power cord is not damaged or pinched. Do not operate the light with a damaged cord.
- This product is rated IP65 waterproof for outdoor use, but avoid submerging it in water.
- Do not look directly into the LED light source when illuminated, as it may cause eye strain or damage.
- Keep the work light away from flammable materials.
- Ensure the tripod stand is placed on a stable, level surface to prevent tipping.
- Do not attempt to modify or repair the unit yourself. Contact qualified service personnel for assistance.
Package Contents
Verify that all components are present before proceeding with assembly.
- 1 x Feit Electric WORK6000XLTPPLUG Dual-Head LED Work Light
- 1 x Telescoping Tripod Stand
- 1 x Integrated 8 ft. Heavy-Duty Power Cord
Image: Product packaging showing the dual-head work light and tripod stand.
Setup and Assembly
- Unpack Components: Carefully remove all items from the packaging.
- Assemble Tripod: Extend the legs of the tripod stand until they are fully spread and stable.
- Attach Light Heads: Securely attach the dual-head LED work light assembly to the top of the telescoping tripod stand. Ensure all fasteners are tightened.
- Adjust Height: Loosen the locking collars on the tripod to extend the telescoping pole to the desired height (up to 45 inches). Tighten the collars firmly to secure the height.
- Position Light Heads: Adjust the angle of each light head as needed.
- Connect Power: Plug the 8 ft. heavy-duty power cord into a standard 120V AC outlet.
Image: The Feit Electric WORK6000XLTPPLUG work light fully assembled on its telescoping tripod stand.
Operating Instructions
The Feit Electric WORK6000XLTPPLUG features independently adjustable dual heads for versatile lighting.
- Power On/Off: Each LED light head has an individual power button located on its back. Press the button to turn the light head on or off.
- Adjust Light Direction: The dual heads can be independently swiveled and tilted to direct light precisely where needed. Loosen the adjustment knobs, position the light, and then tighten the knobs to secure.
- Adjust Tripod Height: To change the overall height, loosen the locking collars on the tripod pole, extend or retract the pole, and then firmly tighten the collars.
Image: Close-up view of the dual LED light heads, showing their adjustable nature.
Maintenance and Care
- Cleaning: Ensure the light is unplugged and cool before cleaning. Wipe the surfaces with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Storage: When not in use, collapse the tripod stand and store the work light in a dry, protected area. The compact design allows for easy transport and storage.
- Cord Inspection: Periodically inspect the power cord for any signs of damage, cuts, or fraying. If damage is found, discontinue use and replace the cord or unit if necessary.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power to the outlet. Power cord is damaged. Light head switch is off. | Check the power outlet with another device. Inspect the power cord for damage; discontinue use if damaged. Ensure the individual power button on the light head is pressed. |
| Light flickers or dims. | Unstable power supply. Loose connection. | Ensure the power source is stable. Check that the power cord is securely plugged into the outlet. |
| Tripod is unstable. | Legs not fully spread. Locking collars not tightened. Uneven surface. | Fully extend the tripod legs. Tighten all locking collars on the telescoping pole. Place the tripod on a flat, stable surface. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | WORK6000XLTPPLUG |
| Wattage | 60 Watts |
| Brightness | 6000 Lumens |
| Color Temperature | 5000 Kelvin (Daylight) |
| Voltage | 120 Volts |
| Amperage | 0.5 Amps |
| IP Rating | IP65 Waterproof |
| Material | Aluminum, Polyamide |
| Power Source | AC (Plug-in) |
| Cord Length | 8 ft. |
| Max Tripod Height | 45 inches |
| Item Weight | 6 Pounds |
| Product Dimensions | 10"L x 3.1"W x 10.5"H (Light heads only) |
| Special Features | Dual-Head, Telescoping Tripod, ETL Listed, Impact Resistance |
Warranty and Support
This Feit Electric WORK6000XLTPPLUG LED Work Light comes with a 1-year limited warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use.
For warranty claims, technical support, or replacement parts, please contact Feit Electric customer service. You can find more information and contact details by visiting the official Feit Electric website or their store on Amazon: Feit Electric Store.
Please retain your proof of purchase for warranty validation.
