Vileda 167765

Download PDFFree PDF. The Save button below keeps a bookmark and private notes in your account.

Vileda ULTRAMAX 2-in-1 Floor Mop Complete Set Instruction Manual

Model: 167765

1. Product Overview

The Vileda ULTRAMAX 2-in-1 Floor Mop Complete Set is designed for efficient and thorough floor cleaning. This set includes a telescopic handle mop with a microfibre cover and a bucket equipped with a PowerPress wringing mechanism. The system is suitable for various hard floor types, including parquet and laminate, providing effective dirt removal and streak-free results.

Set Includes:

  • 1 x ULTRAMAX Mop (3-piece telescopic handle and mop head)
  • 1 x Microfibre Cover
  • 1 x ULTRAMAX Bucket with PowerPress

2. Setup and Assembly

2.1 Unpacking

  • Carefully remove all components from the packaging.
  • Ensure all parts listed in the 'Set Includes' section are present.

2.2 Handle Assembly

  1. Take the three sections of the telescopic handle.
  2. Screw the sections together clockwise until securely fastened.
  3. Adjust the handle length to a comfortable height by twisting the middle section to unlock, extending or retracting, and then twisting to lock.

2.3 Attaching the Microfibre Cover

  1. Place the microfibre cover flat on the floor with the white side facing up.
  2. Align the mop head with the cover.
  3. Press the mop head firmly onto the cover until the buttons on the mop head click into the corresponding pockets on the cover, securing it in place.
Vileda ULTRAMAX 2-in-1 Floor Mop Complete Set with handle, mop head, microfibre cover, and blue bucket with PowerPress

Image: The Vileda ULTRAMAX 2-in-1 Floor Mop Complete Set, showing the assembled mop with its microfibre cover and the blue bucket with the integrated PowerPress wringing mechanism.

3. Operating Instructions

3.1 Filling the Bucket

Fill the ULTRAMAX bucket with water and your preferred floor cleaning solution. Do not exceed the maximum fill line indicated inside the bucket.

3.2 Using the PowerPress Wringing Mechanism

  1. Dip the mop head into the water in the bucket to saturate the microfibre cover.
  2. Place the mop head into the PowerPress wringer, ensuring the mop head is flat against the wringer's base.
  3. Press down on the mop handle to activate the PowerPress. The wringer will squeeze excess water from the microfibre cover.
  4. Repeat the pressing action until the desired moisture level is achieved. For delicate floors like parquet or laminate, wring out more thoroughly.
Close-up of Vileda ULTRAMAX mop head being wrung in the PowerPress bucket

Image: The Vileda ULTRAMAX mop head positioned within the PowerPress wringing mechanism of the bucket, ready for wringing. This feature allows for hands-free wringing and adjustable moisture levels.

3.3 Mopping Procedure

  1. After wringing, begin mopping your floor in sections.
  2. The XXL PowerZone on the mop head enhances contact with the floor, aiding in the removal of stubborn dirt.
  3. The 3D structure of the microfibre cover ensures smooth gliding and streak-free cleaning.
  4. Rinse and wring the mop cover as needed throughout the cleaning process.

3.4 Floor Compatibility

The Vileda ULTRAMAX system is suitable for all hard floor coverings, including:

  • Tiles
  • Laminate
  • Parquet (wood)
  • Vinyl

4. Care and Maintenance

4.1 Cleaning the Microfibre Cover

  • The microfibre cover can be machine washed at up to 60°C (140°F).
  • Do not use fabric softener, as it can reduce the cleaning performance of the microfibres.
  • Do not tumble dry. Air dry for best results.

4.2 Cleaning the Bucket

Rinse the bucket thoroughly with clean water after each use. Allow it to air dry before storing.

4.3 Storage

Store the mop and bucket in a clean, dry place away from direct sunlight. Ensure the mop cover is dry before storing to prevent mildew.

5. Troubleshooting

ProblemSolution
Mop leaves streaks on the floor.Ensure the microfibre cover is clean. Wring the mop more thoroughly to reduce excess water. Avoid using too much cleaning solution.
Mop cover detaches during use.Ensure the mop cover is correctly attached to the mop head, with all buttons securely clicked into place.
Difficulty wringing out water.Ensure the mop head is properly positioned in the PowerPress wringer. Apply firm, consistent pressure on the handle.
Mop not cleaning effectively.Check if the microfibre cover is dirty and needs washing. Ensure you are using an appropriate cleaning solution for your floor type.

6. Product Specifications

FeatureDetail
Model Number167765
BrandVileda
Included ComponentsMop Head, Telescopic Handle, Microfibre Cover, Bucket with PowerPress
Special Features360° rotation, Extendable telescopic handle
Item Weight1.4 Kilograms (3.08 pounds)
Product Dimensions17.72 x 11.61 x 11.22 inches
Material (Mop Cover)85% Polyester, 15% Polyamide (Microfiber)
Handle MaterialPolyester
ColorDark Blue (Bucket)

7. Warranty and Customer Support

Vileda products are manufactured to high-quality standards. This product includes a 1-year EU spare part availability duration, ensuring access to necessary replacement parts.

For further assistance, product inquiries, or to report any issues, please visit the official Vileda website or contact their customer support directly. Please retain your proof of purchase for warranty claims.

© 2025 Vileda. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.