Introduction
This manual provides essential information for the safe installation, operation, and maintenance of your EGLO Bottazzo 1 LED Ceiling Light. Please read these instructions carefully before installation and retain them for future reference.
The EGLO Bottazzo 1 LED Ceiling Light is a rectangular fixture designed for indoor use. It features a black aluminum frame and a white LED cover, providing broad and pleasant illumination. Its modern design creates a floating effect when mounted on the ceiling. The included remote control allows for adjustment of color temperature (from 2700K warm white to 5000K cool white) and dimming. The energy-efficient LEDs are permanently installed, providing up to 3420 lumens of light. Its minimalist design integrates seamlessly into various living spaces such as kitchens, offices, living rooms, bedrooms, and hallways.
Image: The EGLO Bottazzo 1 LED Ceiling Light, showcasing its sleek, rectangular design and how it appears when installed on a ceiling.
Safety Instructions
- Electrical Safety: Installation must be performed by a qualified electrician in accordance with local wiring regulations. Always switch off the main power supply before installation, maintenance, or cleaning.
- Handling: Do not handle the light fixture with wet hands. Avoid touching the LED surface directly when the light is on.
- Placement: Ensure the mounting surface is stable and can support the weight of the fixture. Do not install in areas with high humidity or extreme temperatures unless specified.
- Cleaning: Use a soft, dry cloth for cleaning. Do not use abrasive cleaners or solvents.
- Disposal: Dispose of the product and its components responsibly, following local regulations for electronic waste.
Package Contents
Verify that all components are present before beginning installation:
- EGLO Bottazzo 1 LED Ceiling Light fixture
- Remote control
- Instruction manual (this document)
- Mounting hardware (screws, wall plugs)
Note: 2 AAA batteries for the remote control are not included.
Setup and Installation
- Prepare for Installation: Turn off the main power supply at the circuit breaker before starting any electrical work.
- Mark Mounting Points: Hold the mounting bracket against the ceiling at the desired installation location. Mark the positions for drilling holes.
- Drill Holes: Drill holes at the marked positions and insert appropriate wall plugs (if necessary).
- Secure Mounting Bracket: Attach the mounting bracket to the ceiling using the provided screws.
- Connect Wiring: Connect the household electrical wires to the terminal block on the light fixture. Ensure correct polarity (Live, Neutral, Earth) as per local electrical codes.
- Attach Light Fixture: Carefully align the light fixture with the mounting bracket and secure it. Ensure all connections are firm and the fixture is stable.
- Restore Power: Once installation is complete and secure, restore power at the circuit breaker.
Image: A close-up view of the ceiling light, highlighting its slim profile and the modern 'floating' appearance when installed.
Operating Instructions
The EGLO Bottazzo 1 LED Ceiling Light is operated using the included remote control.
Remote Control Functions:
Image: Diagram illustrating the remote control layout and the function of each button, including power, brightness adjustment, and color temperature selection.
- Power On/Off: Press the ON button to turn the light on, and the OFF button to turn it off.
- Dimming: Use the Brightness Up and Brightness Down buttons to adjust the light intensity.
- Color Temperature Adjustment: Press the 2700K button for warm white light, and the 5000K button for cool white light. Intermediate temperatures are also available.
- Grouping (if applicable): If you have multiple EGLO Bottazzo lights, the remote may allow for grouping them to control simultaneously. Refer to the remote's specific instructions for pairing.
Image: A visual representation of the adjustable color temperature settings, ranging from warm white (2700K) to neutral white (4000K) and cool white (5000K).
Maintenance
- Cleaning: Ensure the power is off before cleaning. Wipe the fixture with a soft, dry, or slightly damp cloth. Do not use harsh chemicals, abrasive cleaners, or sprays directly on the light.
- LEDs: The LEDs are permanently installed and do not require replacement. Do not attempt to open the fixture to access the LEDs.
- Remote Control: Replace the AAA batteries in the remote control when its range or responsiveness decreases.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power supply; loose wiring; remote control batteries depleted. | Check circuit breaker. Verify wiring connections (consult an electrician). Replace remote control batteries. |
| Remote control not working. | Batteries depleted; remote out of range; obstruction. | Replace AAA batteries. Ensure remote is within operating range and pointed towards the light. Remove any obstructions. |
| Light flickers or dims unexpectedly. | Unstable power supply; loose connection. | Check household electrical supply. Verify wiring connections (consult an electrician). |
| Color temperature or brightness cannot be adjusted. | Remote control issue; interference. | Ensure remote batteries are fresh. Try resetting the light by turning off and on at the main switch. |
If you encounter issues not listed here or if the problem persists, please contact EGLO customer support.
Specifications
Image: A technical drawing indicating the precise measurements of the ceiling light: 100 cm in length, 25 cm in width, and 7 cm in height.
| Feature | Detail |
|---|---|
| Brand | EGLO |
| Model Number | 75565 |
| Dimensions (L x W x H) | 100 x 25 x 7 cm |
| Weight | 1.85 Kilograms |
| Material | Plastic, Aluminum |
| Color | Black |
| Light Source Type | LED (permanently installed) |
| Number of Light Sources | 1 |
| Power Consumption | 24 Watts |
| Luminous Flux | Max. 3420 Lumens |
| Voltage | 240 Volts |
| Color Temperature | Adjustable (2700K Warm White to 5000K Cool White) |
| Special Features | Dimmable, Remote Control Included |
| Installation Type | Ceiling Mount |
| Remote Control Batteries | 2 x AAA (not included) |
Warranty Information
EGLO products are manufactured to high-quality standards. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official EGLO website. Keep your proof of purchase for any warranty claims.
Support
For further assistance, technical support, or inquiries regarding your EGLO Bottazzo 1 LED Ceiling Light, please contact EGLO customer service through their official website or the contact information provided in your product packaging.
Website: www.eglo.com
