Nikai NSB10 2.0 Channel Bluetooth Sound Bar Speaker User Manual

Introduction

Thank you for purchasing the Nikai NSB10 2.0 Channel Bluetooth Sound Bar Speaker. This manual provides important information regarding the safe operation, installation, and maintenance of your device. Please read it thoroughly before using the product and retain it for future reference.

Safety Information

• Do not expose the sound bar to rain or moisture to prevent fire or electric shock.
• Do not open the casing. Refer all servicing to qualified personnel.
• Ensure the power adapter is compatible with your local power supply.
• Keep the sound bar away from heat sources, direct sunlight, and strong magnetic fields.
• Clean only with a dry cloth.

Package Contents

Please check that all items listed below are included in your package:

• Nikai NSB10 Sound Bar Speaker
• Remote Control
• User Manual (this document)
• Power Adapter (AC/DC)
• 3.5mm to 3.5mm AUX Cable
• RCA to 3.5mm Audio Cable

Figure 1: Power Adapter. This adapter converts AC power to DC 18V/2A for the sound bar.

Figure 2: 3.5mm to 3.5mm AUX Cable. Used for connecting devices with a 3.5mm audio output.

Figure 3: RCA to 3.5mm Audio Cable. Used for connecting devices with RCA audio outputs to the sound bar's 3.5mm AUX input.

Product Overview

Familiarize yourself with the components and connections of your Nikai NSB10 Sound Bar.

Figure 4: Front view of the Nikai NSB10 Sound Bar. Features a sleek, high-glossy enclosure and a protective speaker grille.

Figure 5: Side panel controls and inputs. This view shows the power/mode button, play/pause, track skip/volume buttons, USB port, and TF card slot.

• Power/Mode Button (U/M): Press and hold to power on/off. Press briefly to switch between input modes (Bluetooth, AUX, USB, TF).
• Play/Pause Button (►II): Play or pause audio playback.
• Previous Track/Volume Down (◀◀/🔉): Press briefly for previous track. Press and hold to decrease volume.
• Next Track/Volume Up (►►/🔊): Press briefly for next track. Press and hold to increase volume.
• USB Port: For connecting USB flash drives for audio playback.
• TF Card Slot: For inserting TF (MicroSD) cards for audio playback.

Figure 6: Rear panel connection ports. This view displays the AUX input, Optical input, and DC 18V/2A power input.

• AUX Input: For connecting external audio devices using a 3.5mm audio cable.
• OPTICAL Input: For connecting devices with an optical audio output (e.g., TVs, game consoles).
• DC 18V/2A Input: Connect the provided power adapter here.

Setup and Connections

1. Power Connection

1. Connect the DC plug of the power adapter to the DC 18V/2A input port on the rear of the sound bar.
2. Plug the AC end of the power adapter into a wall outlet.
3. The sound bar will enter standby mode. Press and hold the Power/Mode button on the sound bar or remote control to turn it on.

2. Audio Connections

The Nikai NSB10 offers multiple ways to connect to your audio sources:

Bluetooth Connection

1. Power on the sound bar.
2. Press the Mode button on the sound bar or the BT button on the remote control to select Bluetooth mode. The indicator light will flash, indicating it's in pairing mode.
3. On your Bluetooth-enabled device (e.g., smartphone, tablet), search for available Bluetooth devices.
4. Select "NSB10" from the list. Once paired, the indicator light will stop flashing and remain solid.
5. You can now play audio from your device through the sound bar.

AUX (3.5mm) Connection

1. Connect one end of the 3.5mm audio cable (or RCA to 3.5mm cable) to the AUX input port on the rear of the sound bar.
2. Connect the other end of the cable to the audio output (e.g., headphone jack) of your external device.
3. Press the Mode button on the sound bar or the AUX button on the remote control to select AUX mode.
4. Play audio from your connected device.

Optical Connection

1. Connect an optical audio cable (not included) from the OPTICAL output of your TV or other device to the OPTICAL input port on the rear of the sound bar.
2. Press the Mode button on the sound bar or the OPT button on the remote control to select Optical mode.
3. Ensure your TV's audio output settings are configured for "Optical Out" or "PCM" format.

USB/TF Card Playback

1. Insert a USB flash drive into the USB port or a TF (MicroSD) card into the TF card slot on the side of the sound bar.
2. The sound bar will automatically switch to USB or TF mode and begin playing compatible audio files. If it does not switch automatically, press the Mode button on the sound bar or the USB/TF button on the remote control.

Basic Operation

• Power On/Off: Press and hold the Power/Mode button on the sound bar or the power button on the remote control.
• Volume Adjustment: Use the Volume Up (►►/🔊) and Volume Down (◀◀/🔉) buttons on the sound bar or the volume buttons on the remote control.
• Mode Selection: Press the Power/Mode button on the sound bar or the dedicated mode buttons (BT, AUX, OPT, USB/TF) on the remote control to switch between input sources.
• Playback Control (USB/TF/Bluetooth): Use the Play/Pause (►II), Previous Track (◀◀/🔉), and Next Track (►►/🔊) buttons on the sound bar or remote control.
• Mute: Press the Mute button on the remote control to temporarily silence the audio. Press again to unmute.
• Equalizer (EQ): Press the EQ button on the remote control to cycle through preset equalizer modes (e.g., Pop, Rock, Jazz, Classic, Flat).

Remote Control Functions

The included remote control provides convenient access to all sound bar functions.

Figure 7: Layout of the Nikai NSB10 remote control.

• Power Button (Red): Turns the sound bar on or off.
• Mute Button (X): Mutes or unmutes the sound.
• Volume Up/Down (🔊/🔉): Adjusts the master volume.
• Previous Track (◀◀): Skips to the previous track (in Bluetooth, USB, TF modes).
• Play/Pause (►II): Plays or pauses audio (in Bluetooth, USB, TF modes).
• Next Track (►►): Skips to the next track (in Bluetooth, USB, TF modes).
• BT Button: Selects Bluetooth input mode.
• OPT Button: Selects Optical input mode.
• EQ Button: Cycles through preset equalizer sound modes.
• AUX Button: Selects AUX (3.5mm) input mode.
• USB/TF Button: Selects USB or TF card input mode.

Maintenance

• Cleaning: Use a soft, dry cloth to clean the surface of the sound bar. Do not use liquid cleaners or abrasive materials.
• Storage: If not using the sound bar for an extended period, unplug it from the power outlet and store it in a cool, dry place.
• Avoid Obstructions: Ensure the speaker grilles are not blocked to maintain optimal sound quality and prevent overheating.

Troubleshooting

Specifications

Note: Specifications are subject to change without prior notice.

Warranty and Support

For warranty information or technical support, please refer to the warranty card included with your product or contact Nikai customer service through their official website or authorized distributors. Please retain your purchase receipt as proof of purchase for warranty claims.