Feit Electric Smart Doorbell Camera User Manual

Introduction

The Feit Electric CAM/DOOR/WIFI/BAT Smart Doorbell Camera provides advanced home security by allowing you to monitor your front door from anywhere. Featuring 1080p HD video, two-way audio, and night vision, this battery-powered or hardwired doorbell ensures you're always connected to your home. It operates on a 2.4 GHz Wi-Fi network and integrates seamlessly with the Feit Electric mobile app for real-time alerts and video access.

This manual provides detailed instructions for installation, setup, operation, and maintenance of your Feit Electric Smart Doorbell Camera.

What's in the Box

• Feit Electric Smart Doorbell Camera (Model: CAM/DOOR/WIFI/BAT)
• Mounting Bracket
• Mounting Screws and Anchors
• Double-Sided Tape (for alternative mounting)
• Wire Extenders and Wire Terminal Block (for hardwiring)
• Reset Tool
• Lithium Ion Batteries (2 included)
• User Manual (this document)

Image: Feit Electric Smart Video Doorbell packaging. This image illustrates the product's packaging, highlighting key features such as rechargeable battery, Wi-Fi connectivity, 1080p HD video, motion detection, two-way audio, and no monthly fees.

Installation

Your Feit Electric Smart Doorbell Camera offers flexible installation options, including battery-powered and hardwired setups. Ensure you have all necessary components before beginning.

1. Prepare the Doorbell and Mounting Bracket

1. Remove the mounting bracket from the top of the doorbell unit.
2. If using an SD card (up to 128GB supported, purchased separately for local storage and video playback), insert it into the card slot located on the doorbell unit at this time.

Image: Feit Electric Smart Doorbell Camera. This image displays the main doorbell unit, which houses the camera, speaker, microphone, and doorbell button.

2. Mounting the Bracket

Choose between screw mounting or double-sided tape mounting.

Screw Mounting:

1. If hardwiring, feed the existing doorbell wires through the bracket before mounting.
2. Align the mounting bracket with the desired wall position and mark the screw positions with a pencil.
3. If installing into drywall, insert the provided mounting anchors into the marked positions.
4. Use the mounting screws to securely attach the bracket to the wall.

Double-Sided Tape Mounting:

1. Clean the mounting area thoroughly to ensure proper adhesion.
2. Apply the provided double-sided tape to the back of the mounting bracket.
3. Peel off the protective backing from the tape and firmly press the bracket onto a flat surface on the wall.

3. Powering the Doorbell

The doorbell can be powered by its internal battery pack or hardwired to an existing doorbell system (12-24 Volt VAC power).

Battery Power Installation:

1. Ensure the battery pack is charged.
2. Slide the smart video doorbell unit down onto the mounted bracket.
3. Press the battery compartment up into the smart video doorbell unit until it locks securely into place.

Hardwired Installation (12-24 Volt VAC):

WARNING: To avoid fire, shock, or death, turn off the power at the circuit breaker or fuse and test to be sure power is off before wiring.

1. Shut off power to your doorbell at the circuit breaker or fuse box.
2. Attach your existing doorbell wires to the external power port on the back of your smart video doorbell. If your existing doorbell wires are too short, use the provided wire extenders and wire terminal block.
3. Tighten the terminal screws with a screwdriver to secure the connections.
4. Slide the smart video doorbell unit down onto the mounted bracket.
5. Press the battery compartment up into the smart video doorbell unit until it locks securely into place.
6. Restore power at the circuit breaker.

Setup (App Connection)

To connect your Feit Electric Smart Doorbell Camera to your smartphone, follow these steps:

1. Download the Feit Electric App: Download the Feit Electric app from the App Store (iOS) or Google Play Store (Android).
2. Prepare the Doorbell for Pairing:
   • Ensure the LED indicator on the doorbell is blinking red. This indicates it's ready for connection.
   • If the indicator is not blinking red, press and hold the reset button (located on the unit, use the included reset tool) for at least 5 seconds until you hear an audible tone.
3. Add Device in App:
   • Open the Feit Electric app.
   • Choose your desired location (e.g., Living Room, Master Bedroom) and tap "Add Device" or the "+" icon in the upper right corner.
   • Select "Security & Cameras" from the device type list, then choose "Doorbell."
   • Confirm that your device's LED is blinking red in the app and proceed.
4. Connect to 2.4 GHz Wi-Fi:
   • Ensure your smartphone is connected to a 2.4 GHz Wi-Fi network. The doorbell camera is compatible only with 2.4 GHz networks.
   • Enter your Wi-Fi password in the app and tap "Next."
5. Scan QR Code:
   • The app will generate a QR code. Hold your phone approximately 6-12 inches away from the doorbell camera, ensuring the QR code is clearly visible on your screen.
   • Wait for the doorbell to emit a connection tone (a beep).
   • Once you hear the beep, tap "I heard the beep" in the app to begin the pairing process.
6. Completion:
   • The app will display a confirmation screen once the connection is successful.
   • Tap "Done" to complete the setup.
7. Alternative EZ Mode Connection: If QR code pairing fails, you can switch to "EZ Mode" in the upper right corner of the app's device setup screen and follow the on-screen instructions.

Operating Your Smart Doorbell Camera

Once connected, you can access and control your doorbell camera through the Feit Electric app. Features may vary slightly by camera model.

• Live Video Feed: View real-time 1080p HD video from your camera directly on the app's control panel.
• Two-Way Audio: Use the built-in microphone and speaker to converse with visitors at your door from anywhere. Simply press the "Speak" button in the app.
• Motion Detection and Alerts: Receive instant alerts on your smartphone when motion is detected outside your door.
• Night Vision: The integrated IR sensor provides clear visibility even in low-light conditions or complete darkness, with a night vision range of up to 30 feet.
• Recording and Playback:
  • Record video directly from the app.
  • Recorded events can be stored locally on a Micro-SD card (up to 128GB, not included).
  • Access and download recorded video wirelessly through the Feit app from the SD card. No monthly fees or subscriptions are required for local storage.
• Screenshots: Capture still images from the live video feed.

Maintenance

• Battery Charging: If using battery power, monitor the battery level via the app. Recharge the detachable battery pack as needed.
• SD Card Management: Regularly check the SD card storage. You can download important footage to your device and format the SD card through the app to free up space. The camera supports up to 128GB Micro-SD cards, capable of recording up to 14,400 minutes of video (approximately 10 days).
• Cleaning: Gently wipe the camera lens and doorbell surface with a soft, damp cloth. Avoid abrasive cleaners.

Troubleshooting

Specifications

Warranty and Support

Warranty: This camera has a one-year warranty from the date of purchase.

Customer Service: For any questions, technical support, or warranty claims, please contact Feit Electric at info@feit.com or call toll-free 1-866-326-BULB.