Northpoint Blackline LED Work Light with Tripod

Introduction

The Northpoint Blackline LED Work Light with Tripod (Model NP-BS21-2x150) is a powerful and versatile lighting solution designed for various work environments. This manual provides essential information for safe assembly, operation, and maintenance of your work light. Please read these instructions carefully before using the product and retain them for future reference.

Image: Northpoint Blackline LED Work Light with Tripod, showing the two LED panels mounted on an adjustable tripod with a power cable.

Safety Instructions

To ensure safe operation and prevent damage, observe the following safety guidelines:

• Read all instructions thoroughly before initial use.
• Ensure the power supply voltage matches the product's requirements (230 Volts).
• Do not look directly into the LED light source when it is active, as this may cause eye strain or damage.
• Keep children and pets away from the work light during operation and storage.
• Always ensure the tripod is stable on a flat, non-slip surface to prevent tipping.
• Do not operate the light if the power cable, plug, or housing is damaged. Contact qualified personnel for repairs.
• The product is IP65 rated for outdoor use, offering protection against dust and low-pressure water jets. However, avoid submerging it in water.
• Always unplug the device from the power outlet before cleaning, maintenance, or when not in use.
• Do not cover the light during operation to prevent overheating.

Image: TÜV SÜD and GS (Geprüfte Sicherheit - Tested Safety) certification logos, indicating product safety compliance. For more information, visit TÜV SÜD Product Certification.

Package Contents

Verify that all components are present and undamaged upon unpacking:

• 2 x 150W LED Spotlights
• 1 x Height-Adjustable Tripod
• 1 x 5m Y-Power Cable with German Plug (each spotlight features an integrated on/off switch)
• 1 x User Manual and Assembly Instructions

Setup

1. Unpack Components: Carefully remove all parts from the packaging.
2. Assemble Tripod: Extend the tripod legs outwards until they are fully spread and locked into position. This ensures maximum stability for the work light.
3. Mount LED Spotlights: Attach the two LED spotlights to the crossbar of the tripod. Secure them firmly using the provided fasteners. Ensure they are oriented correctly.
4. Adjust Height: Loosen the locking mechanism on the tripod pole. Extend the pole to the desired height, up to a maximum of 170 cm. Once the desired height is reached, securely tighten the locking mechanism to prevent slippage.
5. Adjust Light Angle: The spotlights can be individually tilted and rotated. Loosen the adjustment knobs on each spotlight, position them to illuminate your work area effectively, and then tighten the knobs.
6. Connect Power: Plug the 5m Y-power cable into a suitable 230V power outlet.

Image: The work light tripod showing its adjustable height from a minimum of 121 cm to a maximum of 170 cm, and its foldable design for easy handling.

Operating Instructions

1. Power On/Off: Each LED spotlight has an integrated on/off switch located on its housing. Press the switch to turn the light on or off.
2. Adjusting Light Direction: The individual spotlights can be manually adjusted upwards, downwards, left, and right to direct the light precisely where needed. Ensure adjustment knobs are tightened after positioning.
3. Indoor and Outdoor Use: This work light is IP65 rated, making it suitable for both indoor and outdoor applications. When used outdoors, ensure the power connection is protected from moisture.

Detail of the on/off switch.

Suitable for indoor and outdoor use.

Maintenance

Proper maintenance ensures the longevity and optimal performance of your work light:

• Cleaning: Always disconnect the power before cleaning. Use a soft, damp cloth to wipe the housing and glass front. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the surfaces.
• Storage: When not in use, fold the tripod for compact storage. Store the work light in a dry, protected area, away from direct sunlight and extreme temperatures.
• Cable Inspection: Regularly inspect the power cable and plug for any signs of damage, such as cuts, fraying, or bent pins. If damaged, do not use the product and contact customer support for assistance.

Troubleshooting

If you encounter issues with your Northpoint Blackline LED Work Light, refer to the following common problems and solutions:

• Light Does Not Turn On:
  • Check if the power cable is securely plugged into a functional 230V outlet.
  • Verify that the on/off switch on each spotlight is in the "on" position.
  • Inspect the power cable for any visible damage. If damaged, discontinue use.
• Light is Dim or Flickering:
  • Ensure the power supply is stable and not experiencing voltage fluctuations.
  • If the issue persists, contact customer support.
• Tripod Instability:
  • Ensure all tripod legs are fully extended and locked into place.
  • Place the tripod on a flat, stable, and level surface.
  • Verify that the height adjustment locking mechanism is securely tightened.

Specifications

Image: Detail showing the IP65 protection rating and the 5-meter Y-cable with a practical cable splitter.

Warranty and Support

Northpoint provides a standard manufacturer's warranty for this product. For warranty claims, technical support, or inquiries regarding replacement parts, please contact Northpoint customer service through their official channels. Please retain your proof of purchase for warranty validation.