CubicFun Harry Potter Hogwarts Castle 3D Puzzle Instruction Manual

1. Introduction

This manual provides instructions for assembling and caring for your CubicFun Harry Potter Hogwarts Castle 3D Puzzle. This model kit allows you to construct a detailed replica of Hogwarts Castle using 197 pre-cut paper pieces, without the need for glue or additional tools. Designed for fans aged 8 and up, this puzzle offers an engaging and creative building experience, resulting in a beautiful display piece.

Safety Information

• WARNING: Not suitable for children under 3 years due to small parts which may present a choking hazard.
• Adult supervision is recommended for younger builders.
• Keep packaging materials away from children.

2. Setup and Assembly

The Hogwarts Castle 3D Puzzle is designed for straightforward assembly without the need for glue or tools. Follow the numbered pieces and step-by-step instructions provided in the box for optimal results.

Preparation

1. Unpack all components from the box.
2. Identify the instruction booklet.
3. Carefully detach the pre-cut paper pieces from their sheets. Organize them by number or section as indicated in the instructions.
4. Ensure you have a clean, flat, and well-lit workspace.

Assembly Steps

Refer to the detailed graphical instructions included in your product box for specific piece-by-piece assembly. The general process involves:

• Step-by-Step Construction: Follow the numbered sequence to connect pieces. Each piece is designed to interlock securely.
• Folding: Fold along pre-scored lines to create the 3D shapes.
• Interlocking: Insert tabs into corresponding slots. Ensure a snug fit for stability.
• Base Assembly: Begin with the base sections, which provide the foundation for the castle structure.
• Building Sections: Construct individual castle sections (towers, walls, courtyards) as per the instructions, then connect them to the base and each other.

Patience is key during assembly. Do not force pieces together. If a connection feels tight, double-check the piece number and orientation.

3. Usage and Display

Once assembled, your CubicFun Harry Potter Hogwarts Castle 3D Puzzle is intended as a decorative display item. It is a detailed architectural model designed to be admired.

• Display Location: Place the finished model on a stable, flat surface away from direct sunlight, excessive heat, or humidity to preserve its integrity and colors.
• Interaction: While durable for display, avoid rough handling or excessive manipulation to prevent damage to the paper components.

4. Care and Maintenance

Proper care will ensure the longevity and appearance of your 3D puzzle model.

• Cleaning: Dust the model gently with a soft, dry brush or cloth. Avoid using water or cleaning solutions, as they can damage the paper material.
• Storage: If disassembling for storage, do so carefully to avoid tearing pieces. Store in a dry, cool place, ideally in its original packaging or a protective container.
• Environmental Factors: Protect the model from direct sunlight, which can cause fading, and from high humidity, which can warp the paper.

5. Troubleshooting

• Missing or Damaged Pieces:

  While rare, if you find a piece is missing or damaged upon opening, please contact the retailer or CubicFun customer support. Refer to the "Warranty and Support" section for contact information.
• Difficulty Connecting Pieces:

  Ensure you are using the correct pieces as indicated by the numbering and the instruction diagrams. Do not force connections; gently adjust the angle or alignment. Sometimes, a slight bend in a tab can help it fit into a slot.

• Model Instability:

  Check all connections, especially in the base and foundational sections, to ensure they are fully interlocked. Loose connections can affect overall stability. Re-press tabs into slots if necessary.

6. Product Specifications

7. Warranty and Support

Specific warranty information for CubicFun products distributed by Asmodee may vary by region. Please refer to the packaging or the official Asmodee website for detailed warranty terms.

Customer Support

For assistance with missing parts, assembly questions, or other product-related inquiries, please contact:

• Retailer: Contact the store or online platform where you purchased the product.
• Asmodee Belgium: Visit the official Asmodee Belgium website for customer service contact details. Asmodee Brand Store

When contacting support, please have your product model number (HPP51063) and proof of purchase available.