Introduction
The Mophie Powerstation GO Flashlight is a versatile device designed to provide portable power for various needs. It functions as a car jump starter, a rechargeable LED flashlight, a work light with an SOS feature, and a portable power bank for charging USB devices. This manual provides essential instructions for safe and effective use of your device.
What's in the Box
Verify that all items are present in the packaging:
- Mophie Powerstation GO Flashlight
- Jumper Cables
- Owner's Manual (this document)
- Convenient Carrying Pouch
Safety Information
Please read and understand all safety warnings and instructions before using this product. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Do not expose the device to moisture or extreme temperatures.
- Do not attempt to disassemble or modify the device.
- Keep out of reach of children.
- Ensure proper ventilation during use and charging.
- When jump starting, connect cables correctly to avoid sparks or damage.
- Do not use the device if it is damaged or appears swollen.
Setup
Charging the Powerstation GO Flashlight
Before first use, fully charge your Powerstation GO Flashlight. Use the provided charging cable and a compatible USB wall adapter (not included) to charge the device. The LED indicator lights will show the charging status.
- Connect the charging cable to the input port on the Powerstation GO Flashlight.
- Connect the other end of the charging cable to a USB power source.
- The charging indicator lights will illuminate to show the battery level. All lights will be solid when fully charged.
USB Port: This image shows the USB-C input port for charging the Powerstation GO Flashlight and the USB-A output port for charging other devices. The battery indicator lights are also visible.
Operating Instructions
Using the Car Jump Starter
The Powerstation GO Flashlight can jump start a full-sized car or SUV. Ensure the Powerstation GO Flashlight is fully charged before attempting a jump start.
- Connect the jumper cables to the jump start port on the Powerstation GO Flashlight.
- Connect the red clamp to the positive (+) terminal of the car battery.
- Connect the black clamp to a metal part of the car's chassis (unpainted, non-moving part) or the negative (-) terminal of the car battery.
- Press the "Jump Start" button on the Powerstation GO Flashlight. Wait for the indicator light to turn solid green.
- Start your vehicle.
- Once the vehicle starts, immediately disconnect the jumper cables from the car battery, then from the Powerstation GO Flashlight.
Portable Car Jump Starter: This image displays the Mophie Powerstation GO Flashlight connected to its mini jumper cables, ready for use. The red and black clamps are clearly visible.
Using the USB Charging Port
The USB-A port allows you to charge smartphones, tablets, and other USB-powered devices.
- Connect your device's USB charging cable to the USB-A output port on the Powerstation GO Flashlight.
- Connect the other end of the cable to your device.
- The Powerstation GO Flashlight will automatically begin charging your device.
Using the LED Flashlight and Work Light
The device features both a powerful LED flashlight and a side-mounted work light with an SOS function.
- To turn on the LED Flashlight, press and hold the flashlight button. Press again to cycle through brightness modes or turn off.
- To activate the Work Light, press the work light button. Press again to cycle through modes (e.g., solid, flashing, SOS) or turn off.
LED Flashlight: This image shows the front end of the Mophie Powerstation GO Flashlight, highlighting the main LED bulb for illumination.
Work Light: This image shows the side of the Mophie Powerstation GO Flashlight, featuring the built-in LED strip that functions as a work light and includes an SOS signaling feature.
Maintenance
- Recharging: For optimal performance, recharge the Powerstation GO Flashlight every 3 months, even if not in use.
- Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures.
- Cleaning: Use a soft, dry cloth to clean the exterior of the device. Do not use harsh chemicals or abrasives.
- Jumper Cables: Inspect jumper cables for any damage before each use. Replace if frayed or damaged.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device not charging | Charging cable not connected properly; faulty cable or adapter; device battery fully charged. | Ensure cable is securely connected. Try a different cable or adapter. Check battery indicator lights. |
| Car not jump starting | Powerstation GO Flashlight not sufficiently charged; incorrect cable connection; car battery severely damaged. | Fully charge the device. Verify correct positive/negative connections. Consult a mechanic if battery is severely damaged. |
| USB device not charging | Powerstation GO Flashlight battery low; incorrect USB cable; device not compatible. | Recharge the Powerstation GO Flashlight. Use a different USB cable. Ensure your device is compatible with USB-A charging. |
| Flashlight/Work light not turning on | Battery low; button not pressed correctly. | Recharge the Powerstation GO Flashlight. Ensure buttons are pressed firmly. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | 401106168 (MPSGFL-36630) |
| Battery Type | Lithium Ion |
| Battery Capacity | 12000 Milliamp Hours |
| Voltage | 12 Volts |
| Item Weight | 1.15 pounds |
| Package Dimensions | 11.97 x 4.45 x 3.7 inches |
| Vehicle Service Type | Passenger Car, SUV |
| Color | Black |
| Manufacturer | mophie |
Warranty Information
Mophie products are designed with quality and durability in mind. For specific warranty details regarding your Powerstation GO Flashlight, please refer to the official Mophie website or the warranty card included with your purchase. Generally, Mophie offers a limited warranty against defects in materials and workmanship under normal use.
Please retain your proof of purchase for warranty claims.
Customer Support
If you have any questions or require further assistance with your Mophie Powerstation GO Flashlight, please visit the official Mophie support website or contact their customer service department. Contact information can typically be found on the Mophie website or on the product packaging.
Online Support: www.mophie.com/support
