GUPUP TCF0221524G-JA02-AUS-G2
GUPUP LED Lights Strip 100 FT
User Manual
1. Introduction
Thank you for choosing the GUPUP 100 FT LED Lights Strip. This product is designed to enhance your living space with vibrant, customizable lighting. Featuring Bluetooth APP control, a 24-key remote, and music synchronization, these RGB rope lights are perfect for bedrooms, living rooms, and party decorations. This manual provides essential information for proper installation, operation, and maintenance to ensure a long-lasting and enjoyable experience.
2. What's in the Box
Please verify that all components are present and in good condition:
- GUPUP 100 FT LED Light Strip (2 x 50ft rolls)
- 24-key Remote Control
- Power Adapter
- Control Box
- Installation Equipment (e.g., adhesive clips)
Image: Contents of the GUPUP LED Lights Strip package.
3. Setup
Follow these steps for proper installation and initial setup:
- Prepare the Surface: Ensure the surface where you plan to install the LED strips is clean, dry, and smooth. The 3M adhesive on the back of the strips provides strong adhesion to wooden or lacquer walls and other clean surfaces.
- Connect the Components: Connect the LED light strips to the control box, and then connect the control box to the power adapter. Ensure all connections are secure. Refer to the connection diagram below.
Image: Correct connection method for the LED light strip system.
- Power On: Plug the power adapter into a suitable power outlet. The lights should illuminate.
- Download the App: For smart control features, download the 'DayBetter' app from the Google Play Store or Apple App Store. You can also scan the QR code provided on the product packaging or use the direct link: https://daybetter.smartthingsapp.com/app/QRcode.
Image: Overview of the mobile application interface for controlling the LED lights.
4. Operating Instructions
Control your GUPUP LED Lights Strip using either the Bluetooth APP or the included 24-key remote control.
4.1. Bluetooth APP Control
The 'DayBetter' app offers extensive control over your LED lights:
- Color Selection: Choose from 16 million colors to match your mood or decor.
- Brightness Adjustment: Adjust the light brightness from 1% to 100%.
- Scene Modes: Utilize 64 pre-set scene modes for various occasions and atmospheres.
- Music Sync: The built-in sensitive microphone allows the lights to change color and follow the rhythm of your music.
- Memory Function: The lights automatically remember the last mode settings when you turn them on again.
- Timer Function: Set schedules for your lights to turn on or off automatically, adding convenience to your daily routine.
Image: LED lights installed in a bedroom, controlled via app or remote.
4.2. 24-Key Remote Control
The included remote control provides quick access to essential functions:
- Power On/Off
- Color selection (pre-set colors)
- Brightness adjustment
- Dynamic modes (e.g., Flashing, Quick, Jump, Fade)
5. Maintenance
To ensure the longevity and optimal performance of your GUPUP LED Lights Strip, follow these maintenance guidelines:
- Cleaning: Gently wipe the LED strips with a dry, soft cloth to remove dust. Do not use liquid cleaners or abrasive materials.
- Water Resistance: This product is designed for indoor use only and is not water resistant. Avoid exposing the strips, control box, or power adapter to water or high humidity.
- Handling: Avoid excessive bending or twisting of the LED strips, especially at connection points, to prevent damage to the internal wiring.
- Power Supply: Always use the provided power adapter. Using an incompatible power supply may damage the product and void the warranty.
6. Troubleshooting
If you encounter issues with your GUPUP LED Lights Strip, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Lights do not turn on. | Loose connection, no power, faulty adapter. | Check all connections (strip to control box, control box to adapter, adapter to outlet). Ensure the power outlet is working. |
| Lights display incorrect colors or sections are different. | Poor connection at the pins, damaged LED segment. | Ensure the pins connecting the strip to the control box are fully and correctly inserted. Avoid pushing pins in too hard or too far. If a segment is damaged, it may require replacement. |
| Remote control not working. | Battery depleted, remote not pointed at receiver. | Replace the remote control battery. Ensure the remote is pointed directly at the control box's IR receiver. |
| App cannot connect to lights. | Bluetooth not enabled, app not paired, interference. | Ensure Bluetooth is enabled on your device. Restart the app and try pairing again. Move closer to the control box. |
| Lights stop working after cutting. | Incorrect cutting point. | LED strips can only be cut at designated marks (usually indicated by a copper pad and scissor icon). Cutting elsewhere will damage the circuit and prevent the subsequent section from working. This damage is irreversible. |
If the problem persists after trying these solutions, please contact GUPUP customer support.
7. Specifications
| Feature | Detail |
|---|---|
| Brand | GUPUP |
| Model Number | TCF0221524G-JA02-AUS-G2 |
| Light Source Type | LED |
| Light Color | Color Changing (RGB) |
| Length | 100 FT (2 x 50ft rolls) |
| Connectivity Technology | Bluetooth |
| Control Method | APP Control, Remote Control |
| Power Source | Corded Electric |
| Voltage | 24 Volts |
| Wattage | 60 watts |
| Indoor/Outdoor Usage | Indoor |
| Water Resistance Level | Not Water Resistant |
8. Warranty and Support
For warranty information or technical support, please refer to the product packaging or contact GUPUP customer service directly through their official website or the retailer where the product was purchased. Keep your purchase receipt as proof of purchase.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.