1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Prichor Universal Ceiling Fan Remote Control Kit (Model RC-05+5R). This kit is designed to add remote control functionality to most standard 3-speed ceiling fans, including those from brands like Hunter, Harbor Breeze, and Hampton Bay. It enables convenient control over fan speeds (low, medium, high) and light functions (on/off, dimming).
Please read this manual thoroughly before installation and operation to ensure proper use and safety.
2. Package Contents
- Remote Control (Model RC-05)
- Receiver (Model RC-5R)
- Remote Wall Mount Holder
- Wire Nuts
- Mounting Screws
- Instruction Manual
Figure 2.1: Contents of the Prichor Universal Ceiling Fan Remote Control Kit.
3. Specifications
| Feature | Detail |
|---|---|
| Product Dimensions | 4.33 x 2.76 x 0.79 inches (Remote and Receiver combined) |
| Item Weight | 7 ounces |
| Receiver Model | RC-5R |
| Electrical Rating (Receiver) | AC 120V, 60Hz |
| Max Motor Amps (Receiver) | 1A |
| Max Light Watts (Receiver) | 240W (Incandescent, CFL, or LED for light) |
| Fan Speeds | 3-speed control (Low, Medium, High) |
| Light Control | On/Off, Dimming |
| Connectivity Technology | Radio Frequency (RF) |
Figure 3.1: Dimensions of the remote control and receiver.
4. Installation and Setup
4.1 Safety Precautions
- WARNING: To avoid possible electrical shock, ensure power is turned off at the circuit breaker or fuse box before beginning installation.
- Consult a qualified electrician if you are unfamiliar with electrical wiring.
- Do not use with solid-state fan speed controls.
4.2 Wiring the Receiver
The receiver (RC-5R) must be installed within the ceiling fan's canopy. Follow these steps for proper wiring:
- Turn off power to the ceiling fan at the main circuit breaker.
- Remove the existing canopy cover from your ceiling fan to access the wiring.
- Connect the receiver wires to the corresponding fan and house wires using the provided wire nuts. Refer to the wiring diagram below.
- Receiver Black Wire (AC IN L) to House Black Wire (Live)
- Receiver White Wire (AC IN N) to House White Wire (Neutral)
- Receiver Blue Wire (TO LIGHT L) to Fan Light Wire
- Receiver Black Wire (TO MOTOR L) to Fan Motor Live Wire
- Receiver White Wire (TO MOTOR N) to Fan Motor Neutral Wire
- Ensure all ground wires are securely connected.
- Carefully tuck all wires and the receiver into the fan canopy.
- Reattach the canopy cover.
Figure 4.1: Wiring Diagram for the RC-5R Receiver.
Figure 4.2: Remote control and receiver with integrated wiring instructions.
4.3 Remote Control Battery Installation
The remote control requires one CR2032 3V battery (not included). To install:
- Open the battery compartment on the back of the remote control.
- Insert the CR2032 battery with the positive (+) side facing up.
- Close the battery compartment.
Figure 4.3: Remote control battery installation and self-learning button location.
4.4 Pairing the Remote Control
After wiring the receiver and installing the battery in the remote, you need to pair them. This process ensures the remote communicates correctly with your specific receiver.
- Restore power to the ceiling fan at the circuit breaker.
- Within 30 seconds of restoring power, press and hold the "LEARN" button (often labeled '0' or a small button inside the battery compartment) on the remote control for approximately 5 seconds.
- The fan light should blink twice, indicating successful pairing.
- If pairing is unsuccessful, turn off power for 5 seconds, then restore power and repeat step 2.
Note: If installing multiple kits in close proximity, ensure only the fan you wish to pair is powered on during the pairing process to prevent accidental pairing with other units.
5. Operating Instructions
The Prichor remote control provides intuitive control over your ceiling fan and light functions.
Figure 5.1: Prichor Remote Control (Model RC-05).
5.1 Fan Control
- Fan On/Off: Press the central fan icon button to turn the fan on or off.
- Fan Speed: Use the numbered buttons (1, 2, 3) to select the desired fan speed:
- 1: Low Speed
- 2: Medium Speed
- 3: High Speed
Video 5.1: Demonstration of fan speed and light control using the Prichor remote.
5.2 Light Control
- Light On/Off: Short press the light bulb icon button to turn the light on or off.
- Dimming: Long press and hold the light bulb icon button to dim or brighten the light. Release the button when the desired brightness is reached.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Fan or light does not respond to remote. | No power to the receiver, remote battery low/dead, remote not paired, incorrect wiring. |
|
| Fan light does not dim. | Non-dimmable light bulbs installed. | Ensure dimmable light bulbs are used in the fan fixture. |
| Fan makes a humming noise. | Incompatible fan motor or receiver. | While this kit is widely compatible, some fan motors may produce a slight hum with remote control receivers. Ensure the receiver specifications match your fan's requirements. |
| Remote controls multiple fans. | Multiple receivers paired to one remote, or remote in "unlocked" mode. |
|
7. Maintenance
- Cleaning: Wipe the remote control and receiver with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Battery Replacement: Replace the CR2032 battery in the remote control when its performance diminishes.
- Environmental Conditions: Avoid exposing the remote and receiver to extreme temperatures, humidity, or direct sunlight.
8. Warranty and Support
For any issues or questions regarding your Prichor Universal Ceiling Fan Remote Control Kit, please contact Prichor customer support. Specific warranty details may vary; refer to your purchase documentation or contact the seller for more information.
Prichor is dedicated to providing high-quality smart home products and customer satisfaction.
