Introduction
Thank you for choosing the Preethi Crown Plus Mixer Grinder MG-258. This appliance is designed to simplify your kitchen tasks with its powerful motor and versatile jars. Please read this manual carefully before using the appliance to ensure safe and efficient operation. Keep this manual for future reference.
Product Overview
The Preethi Crown Plus Mixer Grinder is a robust kitchen appliance equipped with a 600-watt motor and multiple stainless steel jars for various grinding and juicing needs.
Image: The Preethi Crown Plus Mixer Grinder in red and black, shown with its four accompanying stainless steel and transparent jars.
Key Features:
- Powerful 600W Motor: Ensures efficient mixing and grinding.
- Super Extractor Juicer Jar: Designed for maximum extraction of juices, coconut milk, and tamarind essence. Can also be used as a blender without the filter.
- High-Quality Stainless Steel Jars: Three durable stainless steel jars with polished blades for high precision and performance.
- Heat-Sensitive Cut-off Mechanism: Provides protection against voltage fluctuations and overload.
- Overload-Reset Feature: Located at the bottom of the product, allows for easy reset in case of motor overload.
- High-Grade Nylon Couplers: For enhanced durability and smooth operation.
- Sturdy ABS Body: The mixer body is made from industrial-grade Acrylonitrile Butadiene Styrene (ABS) material.
Image: A close-up of the Preethi Crown Plus Mixer Grinder highlighting its strong and durable ABS body and leaf-proof jars.
Components
The Preethi Crown Plus Mixer Grinder MG-258 comes with the following components:
- Mixer Grinder Base Unit
- 1.5 Litre Super Extractor Juicer Jar
- 1.2 Litre Wet Grinding Jar
- 0.7 Litre Dry Grinding Jar
- 0.3 Litre Chutney Jar
- Stirrer
Image: The four jars included with the mixer grinder, detailing their capacities and recommended uses for chutney, mixing, masala, and juicing.
Setup
- Unpacking: Carefully remove all components from the packaging. Retain the packaging for future storage or transport.
- Initial Cleaning: Before first use, wash all jars, lids, and blades with warm soapy water. Rinse thoroughly and dry. Wipe the main unit with a damp cloth.
- Placement: Place the mixer grinder on a stable, flat, and dry surface, away from heat sources and water. Ensure there is adequate ventilation around the unit.
- Power Connection: Ensure the power switch is in the 'OFF' position before plugging the appliance into a suitable power outlet (230V).
Operating Instructions
- Attach the Jar: Place the desired jar onto the main unit and rotate it clockwise until it locks securely into place.
- Add Ingredients: Place the ingredients into the jar. Do not overfill. Ensure the lid is properly secured on the jar.
- Select Speed: Turn the knob on the front of the unit to the desired speed setting (1, 2, or 3). For pulse operation, turn the knob to the 'P' position and release.
- Start Operation: Switch on the power. The mixer grinder will start operating.
- Stop Operation: Once grinding/mixing is complete, turn the speed knob to the 'OFF' position and switch off the power supply. Wait for the blades to stop completely before removing the lid and jar.
Important Notes:
- Do not run the mixer grinder continuously for more than 5 minutes. Allow a 2-3 minute break between cycles to prevent overheating.
- A slight burning smell may occur during the first few uses due to motor varnish heating. This is normal and should subside with subsequent uses.
- The operating noise level is approximately 80 dB, which is within acceptable industry standards for mixer grinders.
Maintenance and Cleaning
- Always unplug the appliance from the power outlet before cleaning.
- Main Unit: Wipe the main unit with a soft, damp cloth. Do not immerse the main unit in water or any other liquid.
- Jars and Lids: Wash jars, lids, and blades with warm soapy water immediately after use. Use a brush for thorough cleaning of blades. Rinse well and dry completely before storing.
- Storage: Store the mixer grinder and its accessories in a clean, dry place.
Caution:
- The jars and blades are not dishwasher safe.
- Handle blades with extreme care as they are sharp.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Appliance does not start | Not plugged in; Power outage; Overload protector tripped. | Check power connection; Check household fuse/breaker; Press the overload reset button located at the bottom of the unit. |
| Burning smell during operation | First few uses (motor varnish); Overloading. | Normal for initial uses; Reduce quantity of ingredients; Allow motor to cool down. |
| Excessive noise/vibration | Improperly fitted jar; Unstable surface; Overloading. | Ensure jar is locked correctly; Place on a flat, stable surface; Reduce ingredients. |
If the problem persists after attempting these solutions, please contact the Preethi service center.
Specifications
| Feature | Detail |
|---|---|
| Brand | Preethi |
| Model Name | Crown Plus (MG-258) |
| Wattage | 600 Watts |
| Voltage | 230V |
| Number of Jars | 4 (1.5L Super Extractor, 1.2L Wet, 0.7L Dry, 0.3L Chutney) |
| Body Material | Acrylonitrile Butadiene Styrene (ABS) |
| Jar Material | Stainless Steel |
| Blade Material | Stainless Steel |
| Controls Type | Knob |
| Product Dimensions (D x W x H) | 21D x 41W x 27H Centimeters |
| Item Weight | 4000 Grams (4 kg) |
| Operating Noise Level | 80 dB |
Image: Details of the rigorous quality checks performed on the mixer grinder, ensuring durability and performance.
Warranty and Support
The Preethi Crown Plus Mixer Grinder MG-258 comes with the following warranty:
- Product Guarantee: 2 years
- Motor Warranty: 5 years
- Lifelong Free Service: No labor charge for service.
For any service or support needs, please contact the authorized Preethi service center. Ensure you have your purchase receipt and warranty card available.
Product Video Overview
Video: A product overview of the Preethi Crown Plus Mixer Grinder MG-258, highlighting its features and components.