Introduction
Thank you for choosing the Kimiso Km-2005 Portable Bluetooth Speaker. This manual provides detailed instructions for the proper use, setup, and maintenance of your speaker. Please read this manual thoroughly before operating the device to ensure optimal performance and longevity.
Figure 1: Kimiso Km-2005 Portable Bluetooth Speaker. This image displays the speaker's front view with a red illuminated grille and a smartphone placed in the top slot.
Package Contents
- Kimiso Km-2005 Portable Bluetooth Speaker
- USB Charging Cable
- Auxiliary Audio Cable
- User Manual (this document)
Setup
1. Charging the Speaker
Before first use, fully charge the speaker. Connect the supplied USB charging cable to the speaker's charging port and the other end to a USB power adapter (not included) or a computer's USB port. The charging indicator light will illuminate during charging and turn off when fully charged.
2. Powering On/Off
Locate the power button, typically on the control panel. Press and hold the power button for 2-3 seconds to turn the speaker ON or OFF. A voice prompt or indicator light will confirm the status.
Operating Instructions
1. Control Panel Overview
The speaker features a user-friendly control panel with various buttons and ports. Familiarize yourself with these controls:
- Power Button: On/Off.
- Mode Button (M): Switches between Bluetooth, FM Radio, USB, SD Card, and AUX modes.
- Play/Pause Button (►▮): Plays or pauses audio. In FM mode, long press to auto-scan stations.
- Previous Track/Volume Down (-): Short press for previous track; long press to decrease volume.
- Next Track/Volume Up (+): Short press for next track; long press to increase volume.
- USB Port: For USB flash drives.
- SD Card Slot: For Micro SD/TF cards.
- AUX Input: For connecting external audio devices via 3.5mm cable.
- Charging Port: For connecting the USB charging cable.
Figure 2: Kimiso Km-2005 Portable Bluetooth Speaker with blue LED illumination. This image highlights the speaker's aesthetic lighting feature and general design.
2. Bluetooth Mode
- Turn on the speaker. It will automatically enter Bluetooth pairing mode, indicated by a flashing blue LED or a voice prompt.
- Enable Bluetooth on your smartphone, tablet, or other Bluetooth-enabled device.
- Search for "KM-2005" or "Kimiso" in the list of available devices.
- Select "KM-2005" to connect. Once paired, the speaker will confirm with a voice prompt or a solid blue LED.
- You can now play audio from your device through the speaker.
Note: The speaker will automatically attempt to reconnect to the last paired device when powered on.
3. USB/SD Card Mode
- Insert a USB flash drive or an SD/TF card (with MP3 audio files) into the respective port/slot.
- The speaker will automatically switch to USB or SD card mode and begin playing audio. If not, press the "M" (Mode) button to select the correct mode.
- Use the Previous/Next buttons to navigate tracks and Play/Pause to control playback.
4. FM Radio Mode
- Press the "M" (Mode) button until you hear the FM radio prompt.
- To auto-scan and save available stations, long press the Play/Pause button (►▮). The speaker will scan and store stations automatically.
- Use the Previous/Next buttons to switch between saved stations.
- For better reception, ensure the USB charging cable is connected, as it often acts as an antenna.
5. AUX Mode
- Connect one end of the 3.5mm auxiliary audio cable to the speaker's AUX input port.
- Connect the other end to the headphone jack of your external audio device (e.g., MP3 player, laptop).
- The speaker will automatically switch to AUX mode. If not, press the "M" (Mode) button to select AUX.
- Control playback and volume from your connected device.
Maintenance
1. Cleaning
Wipe the speaker with a soft, dry cloth. Do not use abrasive cleaners, alcohol, or other chemical solvents, as these may damage the surface. Avoid getting moisture into any openings.
2. Storage
Store the speaker in a cool, dry place away from direct sunlight and extreme temperatures. If storing for an extended period, charge the battery periodically to maintain its health.
3. Battery Care
To prolong battery life, avoid fully discharging the battery frequently. Charge the speaker when the low battery indicator appears. Do not expose the battery to excessive heat or dispose of it in fire.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Speaker does not turn on. | Low battery; Power button not pressed correctly. | Charge the speaker fully. Press and hold the power button for 2-3 seconds. |
| Cannot connect via Bluetooth. | Speaker not in pairing mode; Device Bluetooth off; Too far from speaker. | Ensure speaker is in Bluetooth mode (flashing LED). Turn Bluetooth on/off on your device. Move device closer to speaker (within 10m). |
| No sound. | Volume too low; Incorrect mode selected; Audio source issue. | Increase speaker and device volume. Press "M" to cycle modes. Check audio source playback. |
| FM radio reception is poor. | Weak signal; No antenna. | Connect the USB charging cable (acts as antenna). Try auto-scanning again. Move to an area with better signal. |
Specifications
| Feature | Detail |
|---|---|
| Brand | Kimiso |
| Model | Km-2005 |
| Connectivity Technology | Bluetooth, USB, Auxiliary |
| Compatible Devices | Notebook, Tablet, Smartphone |
| Controller Type | Button |
| Speaker Type | Multimedia |
| Special Features | USB Port |
| Power Source Type | Electric Cord (for charging) |
| Color | Black |
Warranty and Support
The Kimiso Km-2005 Portable Bluetooth Speaker comes with a standard manufacturer's warranty. For detailed warranty terms and conditions, please refer to the warranty card included with your purchase or contact your local retailer.
For technical support, troubleshooting assistance, or service inquiries, please contact Kimiso customer support through their official website or the contact information provided by your point of purchase. Please have your model number (Km-2005) and purchase details ready when contacting support.
