Introduction
This manual provides instructions for the setup, operation, and maintenance of your HCDZ RM-SUXLP6R replacement remote control. This remote is designed to be compatible with various JVC UX-G375 series micro component stereo systems, offering direct functionality without the need for programming.
Setup
Battery Installation
The remote control requires one (1) AAA battery for operation. No programming is needed; the remote will function immediately upon correct battery installation. Please note that batteries are not included with the remote control.
- Locate the battery compartment cover on the back of the remote control.
- Slide the cover downwards or in the direction indicated by an arrow to open it.
- Insert one (1) AAA battery, ensuring the positive (+) and negative (-) terminals align with the markings inside the compartment.
- Replace the battery compartment cover by sliding it back into position until it clicks securely.
Important: Do not mix new and old batteries. Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium) batteries. Remove batteries if the remote will not be used for an extended period to prevent leakage and corrosion.
Operating Instructions
Point the remote control directly at the infrared sensor on your JVC micro component stereo system. Ensure there are no obstructions between the remote and the stereo system. The maximum effective range is approximately 8 meters (26 feet).
Remote Control Layout and Button Functions
Image: Front view of the HCDZ RM-SUXLP6R replacement remote control. It is a light grey rectangular remote with dark grey oval and circular buttons. The power button is blue.
- O/I (Power): Turns the stereo system on or off.
- DISPLAY: Changes the information displayed on the stereo system's screen.
- DIMMER: Adjusts the brightness of the stereo system's display.
- REPEAT: Repeats the current track or album during playback.
- RANDOM: Plays tracks in a random order.
- PROGRAM: Enters program mode to create a custom playlist.
- iPod: Selects the iPod input source.
- CD: Selects the CD input source.
- USB: Selects the USB input source.
- TUNER: Selects the Tuner (radio) input source.
- AUDIO IN: Selects the Audio In (auxiliary) input source.
- TUNER MODE: Switches between FM/AM bands or stereo/mono reception.
- MENU/CANCEL: Accesses or exits menu options, or cancels an operation.
- RESUME: Resumes playback from the last stopped point.
- Navigation Buttons (UP, DOWN, LEFT, RIGHT, SET): Used to navigate menus and confirm selections.
- UP / DOWN: Moves cursor up/down in menus, or adjusts settings.
- LEFT / RIGHT (|< / >|): Skips tracks/chapters, fast forwards/rewinds.
- SET: Confirms a selection or enters a setting.
- CLOCK/TIMER: Accesses clock settings or timer functions.
- FADE/MUTING: Fades audio in/out or mutes/unmutes sound.
- AUTO STBY (Auto Standby): Activates or deactivates the auto standby feature.
- PTY (Program Type): Displays program type information (for radio).
- SLEEP: Sets the sleep timer.
- SOUND TURBO: Enhances bass and treble for a dynamic sound.
- HBS (Hyper Bass Sound): Activates or deactivates Hyper Bass Sound.
- BASS/TREBLE: Allows adjustment of bass and treble levels.
- VOLUME (+ / -): Increases or decreases the audio volume.
Maintenance
Cleaning the Remote Control
To clean the remote control, gently wipe it with a soft, dry cloth. Do not use abrasive cleaners, solvents, or chemical wipes, as these can damage the surface or internal components.
Battery Replacement
Replace the battery when the remote control's response becomes sluggish or stops functioning. Follow the battery installation steps outlined in the "Setup" section. Always dispose of used batteries responsibly according to local regulations.
Caution: Do not leave the remote in an extremely hot or humid place. Do not expose the remote sensor to direct sunlight or strong lighting apparatuses, as this may cause a malfunction.
Troubleshooting
If the remote control is not functioning as expected, please refer to the following common issues and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Remote control does not operate the stereo system. |
|
|
| Buttons are unresponsive or sticky. |
|
|
Specifications
- Model: RM-SUXLP6R
- Brand: HCDZ
- Compatibility: JVC UX-G375 series Micro Component Stereo Systems (UX-G375, UX-G375A, UX-G375B, UX-G375E, UX-G375EN, UX-G375EV, UX-G375UP, UX-G375US, UX-G375UT, UX-G375UW)
- Connectivity Technology: Infrared (IR)
- Power Source: 1 x AAA Battery (not included)
- Maximum Range: 8 meters (approximately 26 feet)
- Number of Supported Devices: 1
- Special Feature: No programming needed, ready to use out of package.
Warranty and Support
Warranty Information
This HCDZ remote control comes with a 90-day warranty from the date of purchase. This warranty covers manufacturing defects. Please retain your proof of purchase for warranty claims.
Customer Support
For further assistance or inquiries regarding your HCDZ remote control, please refer to the seller's contact information provided at the time of purchase. For general troubleshooting, please consult the "Troubleshooting" section of this manual.
