ELIVED 2 Pack Monitor Stand Riser Instruction Manual

1. Introduction

Thank you for choosing the ELIVED 2 Pack Monitor Stand Riser. This product is designed to enhance your workspace ergonomics and organization by elevating your monitor, laptop, or other devices to an optimal viewing height. Its sturdy mesh metal construction and adjustable height settings provide a versatile solution for a more comfortable and efficient desktop environment.

2. Product Features

3 Height Adjustments: Easily adjust the stand to 3.9 inches, 4.7 inches, or 5.5 inches by pressing the button on each leg and lifting the platform.
Improved Ergonomics: Elevates your screen to reduce neck and back strain, promoting a healthier posture during extended use.
Efficient Working Space: Each platform measures 14.6 inches by 9.2 inches, providing ample space underneath for storing office items and maintaining a clutter-free desktop.
1-Minute Assembly: Simple screw-in leg design requires no tools for quick and easy setup.
Stable & Safe Design: Features non-slip legs and anti-skid rubber pads to ensure stability and protect your devices and furniture. Supports up to 44 lbs (20 kg).
Vented Mesh Platform: The perforated surface allows for better airflow, helping to dissipate heat from your devices.

3. Package Contents

The ELIVED 2 Pack Monitor Stand Riser package includes the following components:

2 x Monitor Stand Platforms (Mesh Metal)
8 x Adjustable Legs
1 x Service Card (Contact information for support)

Image showing the components of the ELIVED Monitor Stand Riser: two platforms and eight adjustable legs.

Figure 3.1: Package Contents and Easy Installation Overview

4. Setup Instructions

Follow these simple steps to assemble your ELIVED Monitor Stand Riser:

Unpack all components from the box. You should have two mesh platforms and eight adjustable legs.
Place one monitor stand platform upside down on a flat, stable surface.
Take one adjustable leg and align its threaded end with one of the screw holes on the underside of the platform.
Screw the leg clockwise into the platform until it is securely fastened. No tools are required.
Repeat this process for the remaining three legs on the first platform.
Flip the assembled stand upright.
Repeat steps 2-6 for the second monitor stand platform.

Image illustrating the simple 1-minute assembly process of the monitor stand, showing a leg being screwed into the platform.

Figure 4.1: Visual Guide for Easy Assembly

Video 4.1: Official ELIVED Monitor Stand Assembly Guide. This video demonstrates the quick and tool-free assembly process of the monitor stand, showing how to attach the legs to the platform.

5. Operating Instructions: Height Adjustment

The ELIVED Monitor Stand Riser offers three adjustable height levels to suit your ergonomic needs:

Lowest Height: Approximately 3.9 inches
Medium Height: Approximately 4.7 inches
Highest Height: Approximately 5.5 inches

To adjust the height:

Ensure no heavy objects are on the stand before adjusting.
Locate the small button on each leg of the stand.
Press and hold the button on one leg.
While holding the button, gently pull or push the leg to extend or retract it to your desired height level. You will feel it click into place at each preset height.
Repeat this process for all four legs, ensuring they are all set to the same height for stability.
Verify that all legs are securely locked into position before placing any devices on the stand.

Image showing the three adjustable height levels of the monitor stand, with arrows indicating upward and downward adjustment.

Figure 5.1: Three Height Adjustable Settings

Diagram illustrating the ergonomic benefits of using a monitor riser, showing a user with poor posture before and improved posture after using the stand.

Figure 5.2: Ergonomic Design for Improved Posture

6. Maintenance

To ensure the longevity and optimal performance of your ELIVED Monitor Stand Riser, follow these maintenance guidelines:

Cleaning: Wipe the stand with a soft, damp cloth. Avoid using abrasive cleaners or harsh chemicals that may damage the finish.
Inspection: Periodically check the legs and platform for any signs of wear, damage, or loose connections. Ensure the anti-slip pads are intact.
Weight Limit: Do not exceed the maximum weight capacity of 44 lbs (20 kg) to prevent damage or instability.
Storage: If disassembling for storage, ensure all components are clean and dry. Store in a cool, dry place.

7. Troubleshooting

If you encounter any issues with your monitor stand, refer to the following common troubleshooting tips:

Stand is Wobbly:
- Ensure all four legs are screwed in tightly and are set to the same height level.
- Verify that the stand is placed on a flat and stable surface.
Difficulty Adjusting Height:
- Make sure you are pressing the button on each leg firmly before attempting to adjust the height.
- Ensure there is no obstruction or debris in the adjustment mechanism.
Missing Parts:
- Check all packaging materials thoroughly. If parts are still missing, contact ELIVED customer support.

8. Specifications

Feature	Detail
Brand	ELIVED
Model	2 Pack Monitor Riser
Material	Metal
Color	Black
Item Dimensions (L x W x H)	14.6 x 9.2 x 5.5 inches
Adjustable Height Levels	3 (3.9", 4.7", 5.5")
Load Capacity	44 lbs (20 kg)
Assembly Required	Yes (Tool-free)

Image displaying the product dimensions of the monitor stand, including length, width, and height measurements.

Figure 8.1: Product Dimensions

9. Warranty and Support

ELIVED products are designed for durability and user satisfaction. For any questions, concerns, or warranty claims, please refer to the service card included in your package or contact ELIVED customer support directly. Our team is dedicated to providing assistance and ensuring your experience with our products is positive.

Please retain your proof of purchase for warranty purposes.