Hasbro Marvel Legends Series Marvel's Captain Carter Action Figure Instruction Manual

Introduction

This manual provides essential information for the assembly, operation, and care of your Hasbro Marvel Legends Series Marvel's Captain Carter 6-inch scale action figure. Please read these instructions carefully to ensure proper handling and to maximize your enjoyment of this collectible item.

Safety Information

WARNING: CHOKING HAZARD - Small parts may be generated. Not for children under 3 years. Adult supervision is recommended during assembly and play, especially with smaller components.

Package Contents

Your Marvel Legends Series Marvel's Captain Carter action figure package includes the following items:

• 1x Marvel's Captain Carter 6-inch Action Figure
• 1x Shield Accessory
• 2x Build-a-Figure Parts (typically for 'The Watcher' series)

Image: Marvel's Captain Carter action figure, shield accessory, and two Build-a-Figure components as packaged.

Setup and Assembly

The Captain Carter figure comes pre-assembled. However, accessories and Build-a-Figure parts may require attachment. Follow these general guidelines:

1. Unboxing: Carefully remove the figure and all accessories from the packaging. Retain packaging for future storage if desired.
2. Attaching the Shield: The shield accessory is designed to fit onto the figure's left arm. Gently slide the arm through the straps on the back of the shield.
3. Build-a-Figure Parts: These parts are intended for assembly with other figures in the same series to create a larger character. Refer to the specific instructions provided with other figures for complete Build-a-Figure assembly.

Image: Detailed view of Captain Carter's head sculpt and upper torso, showcasing premium design.

Operating (Posing and Display)

The Marvel's Captain Carter figure features multiple points of articulation, allowing for a wide range of dynamic poses. Exercise care when adjusting joints to prevent damage.

• Joint Movement: Gently manipulate joints at the neck, shoulders, elbows, wrists, torso, hips, knees, and ankles to achieve desired poses.
• Accessory Placement: Ensure the shield is securely attached to the arm.
• Stability: For standing poses, ensure the figure's feet are flat on a stable surface. Adjust leg and ankle joints for balance.

Image: Captain Carter figure posed dynamically, demonstrating articulation and shield use.

Maintenance

To keep your action figure in optimal condition:

• Cleaning: Wipe the figure gently with a soft, dry cloth to remove dust. Avoid harsh chemicals or abrasive materials.
• Storage: Store the figure away from direct sunlight, extreme temperatures, and high humidity to prevent discoloration or material degradation.
• Joint Care: If joints become stiff, gently warm the area with warm water or a hairdryer on a low setting for a few seconds to loosen them before attempting to move.

Troubleshooting

Encountering issues with your figure?

• Stiff Joints: As mentioned in Maintenance, apply gentle heat to the joint area to increase flexibility. Do not force movement.
• Loose Joints: If a joint is too loose, a small amount of clear nail polish or a specialized joint-tightening fluid can be applied to the peg and allowed to dry, creating a tighter fit.
• Missing Parts: If any parts were missing from the original packaging, please contact the retailer or manufacturer's customer support.

Specifications

Warranty and Support

For warranty information or customer support regarding your Hasbro Marvel Legends Series action figure, please refer to the contact details provided on the product packaging or visit the official Hasbro website. Keep your proof of purchase for any warranty claims.