Audison AP8 Prima 8-inch Midrange Car Audio Speakers Instruction Manual

Introduction

The Audison AP8 Prima 8-inch Midrange Speakers are designed to provide high-quality audio reproduction in automotive environments. Developed for vehicles equipped with an 8-inch woofer as a standard OEM component, the AP8 Prima offers enhanced low-frequency energy due to its wide emission surface. This design ensures excellent performance, particularly in installations where the integration of a separate subwoofer is not feasible due to space constraints.

Product Features

• Size: 200 mm (8 inches) diameter
• Continuous Power Handling: 100 W RMS
• Peak Power Handling: 300 W
• Frequency Response: 35 Hz to 3 kHz
• Cone Material: Water-repellent pressed paper
• Speaker Type: Woofer/Midrange
• Water Resistance Level: Water Repellent

Setup and Installation

Proper installation is crucial for optimal performance and safety. It is highly recommended that installation be performed by a qualified professional car audio technician.

Safety Precautions:

• Disconnect the vehicle's battery before beginning any electrical work.
• Wear appropriate personal protective equipment (PPE).
• Ensure all wiring is correctly routed and secured to prevent damage or short circuits.
• Do not obstruct any vehicle safety features (e.g., airbags).

Installation Steps (General):

1. Preparation: Carefully remove existing speakers or trim panels to access the speaker mounting locations.
2. Mounting: Securely mount the Audison AP8 Prima speakers into the designated 8-inch openings. Ensure a tight fit to prevent vibrations and air leaks. Use appropriate mounting hardware.
3. Wiring: Connect the speaker wires to the vehicle's audio system. Pay close attention to polarity (+ and -) to ensure correct phase. Incorrect polarity can lead to poor sound quality.
4. Testing: Before reassembling panels, temporarily reconnect the battery and test the speakers at a low volume to confirm functionality and sound quality.
5. Reassembly: Carefully reassemble all removed panels and trim.

Image 1: Audison AP8 Prima 8-inch Midrange Speakers. These speakers are designed for high-fidelity car audio systems, featuring a durable black frame and cone.

Image 2: Close-up of the speaker terminal on the Audison AP8 Prima. This image highlights the connection points for positive and negative speaker wires, essential for correct installation.

Operating Instructions

Once installed, the Audison AP8 Prima speakers operate as part of your vehicle's audio system. Follow these general guidelines for optimal performance:

• Audio Source: Ensure your head unit or amplifier is properly configured for the speakers.
• Volume Control: Adjust the volume gradually. Avoid excessively high volumes that cause audible distortion, as this can damage the speakers.
• Equalization: Use your audio system's equalizer settings to fine-tune the sound to your preference. Start with flat settings and make small adjustments.
• Crossover Settings: If using an external amplifier or a head unit with crossover capabilities, set the high-pass filter for the AP8 Prima speakers appropriately (e.g., around 60-80 Hz, depending on system configuration) to protect them from very low frequencies they are not designed to reproduce.

Maintenance

The Audison AP8 Prima speakers are designed for durability, but proper care can extend their lifespan and maintain performance.

• Cleaning: Periodically wipe the speaker grilles and surrounds with a soft, dry, or slightly damp cloth. Avoid using harsh chemicals or abrasive cleaners.
• Inspection: Occasionally inspect the speaker cones and surrounds for any signs of damage, tears, or deterioration.
• Environmental Protection: While the speakers are water-repellent, avoid direct exposure to excessive moisture or extreme temperatures.

Troubleshooting

If you encounter issues with your Audison AP8 Prima speakers, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, contact Audison customer support or a qualified car audio technician.

Specifications

Warranty Information

The Audison AP8 Prima speakers come with a Limited Warranty. For specific details regarding warranty coverage, duration, and terms, please refer to the warranty card included with your product or visit the official Audison website. Retain your proof of purchase for warranty claims.

Customer Support

For technical assistance, installation questions, or warranty inquiries, please contact Audison customer support through their official website or authorized dealer network. Providing your product model (AP8 Prima) and serial number (if applicable) will help expedite support.

Visit www.audison.eu for more information and support resources.