SHW 36-Inch Height Adjustable Standing Desk Riser Converter

Important Safety Information

Please read and understand all instructions before assembly and use. Retain this manual for future reference.

• Do not exceed the maximum weight capacity of 30 lbs (13.6 kg). Overloading can cause instability and potential injury.
• Always follow assembly instructions carefully to ensure safety and stability.
• Keep the desk riser on a stable, level surface. Avoid placing it on uneven or unstable surfaces.
• Ensure all components are securely fastened before use. Periodically check for loose connections.
• Keep hands and fingers clear of moving parts during height adjustment to prevent pinching.
• Do not allow children to operate the desk riser without adult supervision.

Package Contents

Verify that all components are present and undamaged before proceeding with assembly.

• Main Desk Riser Unit (Pre-assembled base and main desktop)
• Monitor Shelf
• Storage Basket (Optional attachment)
• Assembly Hardware (Screws, Allen wrench)
• Instruction Manual

Setup and Assembly

The SHW 36-Inch Standing Desk Riser Converter requires minimal assembly. All necessary tools are included.

1. Unpack Components: Carefully remove all parts from the packaging. Place them on a clean, flat, and protected surface.
2. Attach Monitor Shelf: Align the monitor shelf with the designated attachment points on the main desk riser unit. Secure it using the provided screws and Allen wrench. Ensure it is firmly attached.
   

   Image: Fully assembled SHW 36-Inch Standing Desk Riser with monitor shelf in place.
3. Install Storage Basket (Optional): If desired, attach the storage basket underneath the monitor shelf using the provided hardware. Ensure it slides smoothly.
   

   Image: Detailed view of the monitor shelf and optional storage basket, including dimensions.

4. Position the Riser: Place the assembled desk riser onto your existing desk or workstation. Ensure it is centered and stable.

Operating Instructions

This desk riser features a pneumatic spring system for smooth and easy height adjustment.

1. To Raise the Desk:
   • Remove any items that might obstruct the lifting mechanism.
   • Locate the adjustment levers on both sides of the main desktop.
   • Simultaneously press and hold both levers.
   • Gently lift the desktop to your desired standing height. The pneumatic spring will assist in the upward movement.
   • Release both levers to lock the desk at the chosen height. Ensure it is securely locked before placing items on it.
   

   Image: Illustration of raising the desk riser by pressing the side levers.

2. To Lower the Desk:
   • Ensure the area below the desk is clear.
   • Simultaneously press and hold both adjustment levers.
   • Gently apply downward pressure to the desktop to lower it to your desired sitting height. Control the descent to avoid sudden drops.
   • Release both levers to lock the desk at the chosen height.
   

   Image: Close-up of the ergonomic adjustment lever for height control.

For optimal ergonomic positioning, adjust the desk so your arms are at a 90-degree angle when typing, whether sitting or standing.

Image: Ergonomic guide illustrating proper posture for sitting and standing at a workstation.

Maintenance

Regular maintenance helps ensure the longevity and proper function of your desk riser.

• Cleaning: Wipe surfaces with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals that may damage the finish.
• Inspection: Periodically check all screws and connections to ensure they remain tight. Retighten if necessary.
• Mechanism Care: Keep the lifting mechanism free of dust and debris. Do not apply lubricants unless specifically instructed by the manufacturer.

Troubleshooting

If you encounter issues with your SHW Standing Desk Riser, refer to the following common solutions:

• Desk does not adjust smoothly:
  • Ensure both adjustment levers are pressed simultaneously and fully.
  • Check for any obstructions in the lifting mechanism.
  • Verify that the weight on the desk does not exceed the 30 lbs (13.6 kg) capacity.
• Desk feels unstable:
  • Confirm that the desk riser is placed on a flat, stable surface.
  • Check and tighten all assembly screws.
  • Ensure the desk is locked securely at the desired height after adjustment.

If problems persist, please contact SHW customer support.

Specifications

Warranty and Support

The SHW 36-Inch Height Adjustable Standing Desk Riser Converter comes with a Limited Warranty.

For warranty claims, technical support, or further inquiries, please visit the official SHW store or contact their customer service department.

Official SHW Store: SHW Store on Amazon