GE B08M7GPNQ8

GE Classic PAR20 LED Light Bulb Instruction Manual

Model: B08M7GPNQ8

Introduction

Thank you for choosing GE Classic PAR20 LED Light Bulbs. These energy-efficient, dimmable bulbs are designed to provide long-lasting, high-quality daylight illumination for your indoor and outdoor fixtures. This manual will guide you through the safe and proper use of your new LED bulbs.

Safety Information

WARNING: Risk of electric shock. Disconnect power before installation or servicing.
Not for use in totally enclosed luminaires.
Do not use with standard dimmers unless specifically rated for LED dimming. Use only with compatible LED dimmers.
Suitable for damp locations.
Do not disassemble the bulb. There are no user-serviceable parts inside.
Ensure the bulb is cool before handling or replacing.

Setup and Installation

Turn off power: Before replacing any bulb, ensure the power to the fixture is turned off at the circuit breaker or fuse box.
Remove old bulb: Carefully unscrew the existing bulb from the fixture. Allow it to cool if it was recently in use.
Inspect fixture: Check the fixture for any damage or corrosion. Ensure it is compatible with E26 medium base PAR20 bulbs.
Install new bulb: Gently screw the GE Classic PAR20 LED bulb into the socket until it is snug. Do not overtighten.
Restore power: Turn the power back on at the circuit breaker or fuse box.
Test: Turn on the light switch to confirm the bulb is working correctly.

Image 1: Front view of the GE Classic PAR20 LED Light Bulb 2-pack packaging, showing two bulbs and key features like 50W equivalent, 7W actual, dimmable, 550 lumens, and daylight color.

GE Classic PAR20 LED Light Bulb 2-Pack Side Packaging

Image 2: Side view of the GE Classic PAR20 LED Light Bulb 2-pack packaging, highlighting features such as "Daylight LED", "22 Year Life", and "Floodlight Directional".

Operating Instructions

These GE Classic PAR20 LED bulbs are designed for simple operation:

Standard Operation: Once installed, turn on the light switch to illuminate the bulb.
Dimmable Feature: If connected to a compatible LED dimmer switch, you can adjust the brightness of the bulb by operating the dimmer control. Ensure your dimmer is specifically designed for LED bulbs to prevent flickering or damage.

Maintenance

Cleaning: Ensure the power is off and the bulb is cool before cleaning. Wipe the bulb with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
Replacement: These LED bulbs have a long lifespan. When replacement is eventually needed, follow the "Setup and Installation" steps in reverse to remove the old bulb and install a new one.

Troubleshooting

Problem	Possible Cause	Solution
Bulb does not light up.	No power to the fixture, loose connection, or faulty bulb.	Check circuit breaker. Ensure bulb is screwed in tightly. Test bulb in another working fixture.
Bulb flickers or hums.	Incompatible dimmer switch or loose connection.	Ensure dimmer is LED compatible. Tighten bulb. If problem persists, replace dimmer with an LED-specific model.
Light output is too dim or too bright.	Dimmer setting or incorrect wattage for application.	Adjust dimmer. Consider if a different wattage bulb is needed for your specific lighting requirements.

Specifications

Brand: GE
Model: B08M7GPNQ8
Light Type: LED
Special Feature: Dimmable
Equivalent Wattage: 50 Watts
Actual Wattage: 7 Watts
Bulb Shape Size: PAR20
Bulb Base: E26 Medium
Light Color: Daylight
Color Temperature: 5000 Kelvin
Brightness: 550 Lumens
Beam Angle: 35 Degrees
Voltage: 120 Volts (AC)
Indoor/Outdoor Usage: Indoor, Outdoor
Average Life: 13 Years (based on 3 hours per day use)
Material: Copper (internal components)
Item Weight: 0.66 Pounds

Warranty and Support

For warranty information or technical support, please refer to the packaging or visit the official GE Lighting website. Keep your purchase receipt as proof of purchase for any warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.