Introduction
Thank you for purchasing the WE LED Display FM Dual Alarm Clock Radio. This manual provides detailed instructions for setting up, operating, and maintaining your device. Please read it thoroughly before use to ensure proper functionality and to maximize your user experience.
Safety Information
- Do not expose the unit to water or excessive moisture.
- Avoid placing the unit near heat sources or in direct sunlight.
- Use only the provided power adapter.
- Do not attempt to disassemble or repair the unit yourself. Contact qualified service personnel.
- Keep out of reach of children.
Package Contents
Verify that all items are present in the package:
- WE LED Display FM Dual Alarm Clock Radio
- Power Adapter
- User Manual (this document)
Image: The WE LED Display FM Dual Alarm Clock Radio shown with its retail packaging.
Product Overview and Controls
Familiarize yourself with the main components and control buttons of your alarm clock radio.
Image: Top view of the alarm clock radio, highlighting the control buttons for time, alarm, radio, and volume.
- CLOCK / MEM: Press to set time, hold to save radio stations.
- MIN / TUN-: Adjust minutes, tune radio frequency down.
- HOUR / TUN+: Adjust hours, tune radio frequency up.
- 12/24H: Switch between 12-hour and 24-hour time format.
- SLEEP: Set sleep timer for radio.
- AL1 / AL2: Set Alarm 1 or Alarm 2.
- VOL- / VOL+: Adjust volume.
- MODE / AL OFF: Switch between FM/AM radio, turn off alarm.
- SNOOZE / DIMMER: Snooze alarm, adjust display brightness.
- Power Button: Turn unit on/off.
Image: Front view of the alarm clock radio, showcasing the large red LED display and indicators for alarms (AL1, AL2) and snooze (Zz).
Setup
1. Power Connection
- Connect the power adapter to the DC IN jack on the back of the alarm clock radio.
- Plug the power adapter into a standard wall outlet.
- The display will light up, indicating the unit is powered on.
2. Setting the Time
- Press and hold the CLOCK button until the hour digits flash.
- Use the HOUR / TUN+ button to adjust the hour.
- Use the MIN / TUN- button to adjust the minutes.
- Press the CLOCK button again to confirm and exit time setting mode.
- To switch between 12-hour and 24-hour format, press the 12/24H button.
Operating Instructions
1. Setting Alarms (Alarm 1 and Alarm 2)
This unit features two independent alarms.
- Press and hold the AL1 (or AL2) button until the alarm hour digits flash.
- Use the HOUR / TUN+ button to adjust the alarm hour.
- Use the MIN / TUN- button to adjust the alarm minutes.
- Press the AL1 (or AL2) button again to select the alarm source (Buzzer or FM Radio). The corresponding icon will appear on the display.
- Press the AL1 (or AL2) button one more time to confirm and activate the alarm. The AL1 or AL2 indicator will light up on the display.
- To deactivate an alarm, press the corresponding AL1 (or AL2) button until the AL1/AL2 indicator disappears from the display.
2. Using the FM Radio
- Press the MODE button to switch to FM radio mode. The FM frequency will appear on the display.
- Manual Tuning: Press TUN+ or TUN- repeatedly to adjust the frequency step by step.
- Automatic Scan: Press and hold TUN+ or TUN- to automatically scan for the next available station.
- Adjust Volume: Use the VOL+ and VOL- buttons.
Saving Radio Stations (20 Programmable Stations)
- Tune to your desired FM station.
- Press and hold the MEM button until "P01" (or the next available preset number) flashes on the display.
- Use TUN+ or TUN- to select the desired preset number (P01-P20).
- Press MEM again to save the station.
- To recall a saved station, briefly press the MEM button repeatedly to cycle through the presets.
3. Snooze Function
When an alarm sounds, press the SNOOZE / DIMMER button to temporarily silence the alarm for 9 minutes. The alarm will sound again after 9 minutes.
4. Display Brightness Adjustment
Press the SNOOZE / DIMMER button (when the alarm is not sounding) to cycle through different brightness levels for the LED display (High, Medium, Low, Off).
5. USB Charging Port
The integrated USB port allows you to charge your mobile devices. Connect your device's USB charging cable to the USB port on the back of the alarm clock radio. The charging process will begin automatically.
Image: The alarm clock radio with a smartphone charging via its integrated USB port.
Maintenance
- Cleaning: Wipe the unit with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Storage: If not in use for an extended period, unplug the unit and store it in a cool, dry place.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No power/Display off | Power adapter not connected or faulty outlet. | Check power connection. Try a different outlet. |
| Alarm does not sound | Alarm not set or deactivated. Volume too low. | Ensure AL1/AL2 indicator is lit. Increase volume. |
| Poor radio reception | Weak signal. Antenna not extended. | Adjust the position of the unit. Extend the FM antenna fully. |
| USB charging not working | Device not compatible or cable faulty. | Ensure your device supports USB charging. Try a different USB cable. |
Specifications
| Model Number | WERADREVGDN3 |
| Dimensions (L x W x H) | 20.2 x 0.03 x 8.2 cm (approx. 20.2 cm L x 8.2 cm H) |
| Weight | 350 grams |
| Power Source | Electric Cable (AC Adapter included) |
| Display Type | Digital LED (Red) |
| Special Features | FM Radio, Dual Alarm, Snooze, USB Charging Port, Adjustable Display Brightness |
| Connectivity | USB (for charging) |
| Material | Acrylonitrile Butadiene Styrene (ABS) |
Image: Dimensional diagram of the alarm clock radio, indicating its length, height, and depth.
Warranty and Support
The WE LED Display FM Dual Alarm Clock Radio comes with a 2-year warranty from the date of purchase.
For any questions, technical assistance, or warranty claims, please contact our customer service. Our team is available to respond to your inquiries within 24 hours, Monday to Friday.
Please refer to your purchase documentation for specific contact details or visit the official WE website.