Simbashopping Vienna 51 Whirlpool Bathtub and Shower Hydrotherapy Hot Tub User Manual

Introduction

This manual provides essential information for the safe installation, operation, and maintenance of your Simbashopping Vienna 51 Whirlpool Bathtub and Shower Hydrotherapy Hot Tub. Please read this manual thoroughly before installation and use to ensure proper function and longevity of your product. Keep this manual for future reference.

Important Safety Information

WARNING: To reduce the risk of injury, do not permit children to use this product unless they are closely supervised at all times. This product is not intended for use by persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the product by a person responsible for their safety.

• Always ensure the electrical supply is disconnected before performing any maintenance or service.
• Do not operate the unit if the water level is below the jets.
• Avoid using abrasive cleaners or harsh chemicals that may damage the acrylic surface or components.
• Ensure proper ventilation in the bathroom to prevent moisture buildup.
• Consult a qualified electrician and plumber for installation to ensure compliance with local codes and safety standards.
• Do not use electrical appliances near the bathtub.
• The water temperature should not exceed 40°C (104°F) to avoid hyperthermia.

Product Overview and Features

The Simbashopping Vienna 51 is a combined whirlpool bathtub and shower hydrotherapy unit designed for two persons. It features a robust construction and a range of therapeutic functions.

Key Features:

• Dimensions: Approximately 49" x 49" x 90.55" High (124.46 x 124.46 x 230 cm).
• Material: High-quality black sanitary acrylic bathtub with a steel frame.
• Hydrotherapy System: Double pump system for both water and air jets.
  • 6 small whirlpool jets
  • 4 large whirlpool jets
  • 8 air jets
  • 6 back massagers integrated into the shower column
• Heating: Integrated heater to maintain constant water temperature.
• Lighting: 12 LED chromotherapy lights and a large LED roof light with 7 changeable colors.
• Additional Features:
  • Feet massage function
  • Double soap dish
  • Two seating supports and one inside support
  • Central shower head on the roof
  • Two padded headrests
  • Control panel (computer)
  • FM Radio with 2 loudspeakers
  • Cold and hot water faucet included
  • One switch
  • Pop-up drainage system
  • Towel rack
• Electrical: Power 110 V - 15 amps, with electric leakage protection system (automatic circuit breaker).
• Weight: Approximately 220 pounds (113.4 kg).

Figure 1: Front view of the Simbashopping Vienna 51 Whirlpool Bathtub and Shower Hydrotherapy Hot Tub.

Figure 2: Angled view showcasing the shower enclosure and bathtub.

Figure 3: Side view of the unit, highlighting the compact corner design.

Setup and Installation

Installation of the Simbashopping Vienna 51 requires professional plumbing and electrical expertise. It is designed for floor-mounted installation. Ensure the installation area is level, structurally sound, and has adequate drainage and ventilation.

Pre-Installation Checklist:

• Verify all components are present and undamaged.
• Confirm electrical supply meets 110 V - 15 amps requirements and includes an automatic circuit breaker for leakage protection.
• Ensure hot and cold water supply lines are accessible and correctly sized.
• Prepare a suitable drainage connection.
• Confirm the floor can support the weight of the unit filled with water and occupants (approx. 113.4 kg dry weight + water weight).

Installation Steps (Summary - Professional Installation Recommended):

1. Positioning: Carefully move the unit to its final floor-mounted position, ensuring it is level.
2. Plumbing Connections: Connect the hot and cold water supply lines to the integrated faucets. Connect the pop-up drainage system to the main drain.
3. Electrical Connections: A qualified electrician must connect the unit to the dedicated 110 V - 15 amp circuit with electric leakage protection.
4. Sealing: Apply appropriate sealant around the base and wall junctions to prevent water leaks.
5. Testing: Fill the bathtub with water and test all functions (jets, heater, lights, shower, radio) for proper operation and leaks before final use.

Figure 4: Technical drawing showing the dimensions of the unit (49" x 49" x 90.55" High).

Operating Instructions

Familiarize yourself with the control panel and various functions before operating the unit.

Figure 5: Close-up of the control panel and shower column with jets and handheld shower.

Basic Operation:

1. Filling the Bathtub: Ensure the pop-up drain is closed. Use the cold and hot water faucets to fill the tub to the desired level, ensuring water covers all jets before activating them.
2. Power On/Off: Use the main power switch to turn the unit on or off.
3. Whirlpool Jets: Activate the water jets and air jets via the control panel. Adjust intensity if applicable.
4. Heater Function: The integrated heater maintains the water temperature. Activate it via the control panel to prevent water from cooling.
5. Chromotherapy Lighting: Use the control panel to cycle through the 7 changeable LED colors for the roof light and 12 LED chromotherapy lights.
6. Shower Functions:
   • Central Shower Head: Located on the roof for a rainfall effect.
   • Handheld Shower: For targeted rinsing.
   • Back Massagers: 6 jets on the shower column provide a back massage.
   • Feet Massage: Activate the dedicated feet massage function.
7. FM Radio: Turn on the FM radio via the control panel. Tune to desired stations using the controls. The sound will play through the 2 loudspeakers.
8. Drainage: After use, open the pop-up drainage to empty the bathtub.

Figure 6: Example of the LED chromotherapy lighting in operation.

Figure 7: Close-up showing the feet massage feature and various jet types.

Maintenance

Regular maintenance ensures the longevity and optimal performance of your whirlpool bathtub and shower unit.

Cleaning the Bathtub and Shower Surfaces:

• Use a soft cloth and a mild, non-abrasive cleaner specifically designed for acrylic surfaces.
• Rinse thoroughly with clean water after cleaning to remove any residue.
• Avoid using harsh chemicals, abrasive pads, or solvents as they can damage the acrylic and chrome finishes.

Jet and Plumbing System Cleaning:

• Periodically fill the tub with warm water and add a specialized whirlpool system cleaner or a small amount of white vinegar.
• Run the jets for 10-15 minutes to circulate the cleaning solution through the system.
• Drain the tub, refill with clean water, and run the jets again for a few minutes to rinse.
• Clean jet nozzles manually if blockages are visible.

General Care:

• Wipe down chrome fixtures regularly to prevent water spots and mineral buildup.
• Check all connections periodically for leaks.
• Ensure the electrical circuit breaker is functioning correctly.

Troubleshooting

This section addresses common issues you might encounter. For problems not listed here, contact qualified service personnel.

Specifications

Warranty and Support

The product is eligible for return or refund within 30 days of receipt. Information regarding a manufacturer's warranty is not clearly provided in the product details. For any product inquiries, technical assistance, or warranty claims, please contact Simbashopping USA customer support directly.

Note: Some customer feedback indicates challenges with obtaining support and warranty claims. It is advisable to clarify warranty terms directly with the seller at the time of purchase.